PD-9001GI/DC
Single Port 30W Industrial PoE Midspan
Specifications
Feature Description
No. of Ports 1
Pass Through Data
Rates
Output Power
Input Power
Requirements
Dimensions 31 mm (W) x 111 mm (H) x 78 mm (L)
Weight 0.77 lbs (315 g)
Indicator
Connectors Shielded RJ-45, EIA 568A and 568B
Features and Benefits
• IEEE 802.3at compliant – 30W output
• Dual DC input – 20-60VDC range
• Industrial rated IP30
• Extended temp range -40 ºC - +75 ºC
• Plug and play installation
• Supports 10/100/1000 Mbps
Overview
Microsemi’s PD-9001GI is a single port, high-power solution for
remote powering of current and emerging high power applications.
Generating up to 30W, the 9001GI enables remote power for a new
range of applications including 802.11n Access Points, pan-tilt
zoom (PTZ) cameras and other IP terminals. It complies to IEEE
802.3at PoE standard and is backward compatible to IEEE802.3af.
It can power both 10/100Base-T network devices and 1000Base-T
devices. The 9001GI is designed for industrial applications
and outdoor applications from temperature point of view.
Environmental
Conditions
Reliability MTBF: 170,000 hours @ 25ºC
Warranty 1-year
Regulatory RoHS, WEEE, REACH
Electromagnetic
Emission & Immunity
Safety Approvals UL 508
Shock IEC 60068-2-27 15g, 11 ms duration
Freefall IEC 60068-2-32
Vibration
10/100/1000 Mbps
Pin Assignment and Polarity:
4/5(+), 7/8(-)
Output Power Voltage: 50Vdc
User Port Power: 30W (Guaranteed)
DC Input Voltage: 20 to 60Vdc
DC Input Current: 2A max
Power 1 – Source power 1 is connected
Power 2 – Source power 2 is connected
Alarm – 1 source power is Fault
PoE – IEEE802.3 PD is connected
Operating Ambient Temperature:
-40ºF to 167ºF (-40ºC to 75ºC)
Storage Temperature:
–40ºF to 185ºF (–40ºC to 85ºC)
EN50522 Class A
EN55024
IEC 60068-2-6 3, 5 mm, 3 Hz - 9 Hz,
10 cycles, 1 octave/min
1g, 9 Hz - 150 Hz, 10 cycles 1 octave/
min
Ordering Information
Part Number Description
PD-9001GI/DC 30W Industrial PoE Midspan, Dual DC input
PD-9001GI/DC
Single Port 30W Industrial PoE Midspan
Supported Installation (Accessory Included)
DIN Rail Wall Mount
Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume any liability
whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction
with mission-critical equipment or applications. Any performance specifications are believed to be reliable but are not verified, and Buyer must conduct and complete all performance and other testing of the products,
alone and together with, or installed in, any end-products. Buyer shall not rely on any data and performance specifications or parameters provided by Microsemi. It is the Buyer’s responsibility to independently determine
suitability of any products and to test and verify the same. The information provided by Microsemi hereunder is provided “as is, where is” and with all faults, and the entire risk associated with such information is entirely
with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information.
Information provided in this document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice.
Microsemi Corporation (Nasdaq: MSCC) oers a comprehensive portfolio of semiconductor and system solutions for communications,
defense & security, aerospace and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal
integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization devices and precise time solutions,
setting the world’s standard for time; voice processing devices; RF solutions; discrete components; security technologies and scalable
anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services.
Microsemi Corporate Headquarters
One Enterprise, Aliso Viejo, CA 92656 USA
Within the USA: +1 (800) 713-4113
Outside the USA: +1 (949) 380-6100
Sales: +1 (949) 380-6136
Fax: +1 (949) 215-4996
email: sales.support@microsemi.com
www.microsemi.com
Microsemi is headquartered in Aliso Viejo, Calif., and has approximately 3,600 employees globally. Learn more at www.microsemi.com.
© 2015 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are registered trademarks of Microsemi Corporation. All other trademarks
and service marks are the property of their respective owners.
PD-9001GI/DC_DS Rev. 2.0 09-15