Microsemi Corporation P5KE100A, P5KE13CA, P5KE14CA, P5KE150C, P5KE15A Datasheet

...
8700 E. Thomas Road Scottsdale, AZ 85252 Phone: (480) 941-6300 Fax: (480) 947-1503
P5KE5.0
thru
FEATURES:
ECONOMICAL SERIES
AVAILABLE IN BOTH UNIDIRECTIONAL AND BI-DIRECTIONAL CONSTRUCTION
500 WATTS PEAK PULSE POWER DISSIPATION
QUICK RESPONSE
DESCRIPTION:
DESCRIPTION:
DESCRIPTION:DESCRIPTION:
This Transient Voltage Suppressor is an economical, molded, commercial product used to protect voltage sensitive components from destruction or partial degradation.
The response time of their clamping action is virtually instantaneous (1 x 10 seconds) and they have a peak pulse power rating of 500 watts for 1 ms as depicted in Figure 1 and 2. Microsemi also offers a great variety of other Transient Voltage Suppressor's to meet higher and lower power demands and special applications.
MAXIMUM RATINGS:
MAXIMUM RATINGS:
MAXIMUM RATINGS:MAXIMUM RATINGS:
Peak Pulse Power Dissipation at 25 Steady State Power Dissipation: 2.5 Watts at T
C: 500 Watts
°°°°
= +75
L
C
°°°°
3/8" Lead Length t
clamping
Operating and Storage Temperature: -55
(0 volts to BV Min.):
Unidirectional <1x10
TYPICAL CHARACTERISTIC CURVES
-12
Seconds: Bi-directional <5x10-9 Seconds.
to +175
°°°°
C
°°°°
-12
P5KE170A
5.0 thru 170 volts 500 Watts
Transient Voltage
Suppressors
DO-41
∅∅∅∅
2 x
.032 ± .002
[.81 ± .05]
∅∅∅∅
.107 [2.72] max.
100
75
Peak Power
(Single pulse)
50
25
POWER IN PERCENT OF 25°C RATING
PEAK PULSE POWER (Ppp) OR CONTINUOUS
Continuous
Average Power
Lead Length = 3/8"
0
50
LEAD TEMPERATURE °C
T
L
DERATING CURVE
100 150 175
FIGURE 1
Peak Value Ipp
100
50
PERCENT OF Ipp
PULSE CURRENT IN
1
TIME (t) IN MILLISECONDS
PULSE WAVEFORM FOR
EXPONENTIAL SURGE
Pulse Time Duration
(tp) is Defined as that
point where Ip decays
to 50% of
I surge
23
4
FIGURE 2
.205 [5.21] MAX.
2 X1.10 [27.94] MIN.
NOTE: DIMENSIONS IN [ ] =MILLIMETERS
POLARITY Mark {cathode}
MECHANICAL CHARACTERISTICS
CASE: Void free transfer
molded thermosetting
plastic. FINISH: Readily solderable. POLARITY: Band denotes
cathode. Bi-directional not
marked. WEIGHT: 0.7 gram (Appx.). MOUNTING POSITION: Any
SA4-57.PDF 03-20-00
P5KE5.0
thru
P5KE170A
ELECTRICAL CHARACTERISTICS AT 25°C
PART
NUMBER
BREAKDOWN
VOLTAGE V(BR)
MIN. MAX
VOLTS VOLTS
TEST
CURRENT
I
T
VOLTAGE
mA VOLTS
RATED STAND
OFF
V
WM
MAX. REVERSE
STANDBY CURRENT
ID @ V
WM
ADC VOLTS AMP % /
µµµµ
MAX.
PEAK REVERSE VOLTAGE
VC MA X.
@ I
PP
MAX. PEAK
PULSE
CURRENT
I
PP
(Figure 2)
P5KE5.0 6.40 7.30 10 5.0 600 9.6 52 .057 P5KE5.0A 6.40 7.00 10 5.0 600 9.2 54.3 .057 P5KE6.0 6.67 8.15 10 6.0 600 11.4 43.9 .059 P5KE6.0A 6.67 7.37 10 6.0 600 10.3 48.5 .059 P5KE6.5 7.22 8.82 10 6.5 400 12.3 40.7 .061 P5KE6.5A 7.22 7.98 10 6.5 400 11.2 44.7 .061 P5KE7.0 7.78 9.51 10 7.0 150 13.3 37.8 .065 P5KE7.0A 7.78 8.60 10 7.0 150 12.0 41.7 .065 P5KE7.5 8.33 10.2 1 7.5 50 14.3 35.0 .067 P5KE7.5A 8.33 9.21 1 7.5 50 12.9 38.8 .067 P5KE8.0 8.89 10.9 1 8.0 25 15.0 33.3 .070 P5KE8.0A 8.89 9.83 1 8.0 25 13.6 36.7 .070 P5KE8.5 9.44 11.5 1 8.5 5 15.9 31.4 .073 P5KE8.5A 9.44 10.4 1 8.5 5 14.4 34.7 .073 P5KE9.0 10.0 12.2 1 9.0 1 16.9 29.5 .076 P5KE9.0A 10.0 11.1 1 9.0 1 15.4 32.5 .076 P5KE10 11.1 13.6 1 10 1 18.8 26.6 .078 P5KE10A 11.1 12.3 1 10 1 17.0 29.4 .078 P5KE11 12.2 14.9 1 11 1 20.1 24.9 .081 P5KE11A 12.2 13.5 1 11 1 18.2 27.4 .081 P5KE12 13.3 16.3 1 12 1 22.0 22.7 .082 P5KE12A 13.3 14.7 1 12 1 19.9 25.1 .082 P5KE13 14.4 17.6 1 13 1 23.8 21.0 .084 P5KE13A 14.4 15.9 1 13 1 21.5 23.2 .084 P5KE14 15.6 19.1 1 14 1 25.8 19.4 .086 P5KE14A 15.6 17.2 1 14 1 23.2 21.5 .086 P5KE15 16.7 20.4 1 15 1 26.9 18.8 .087 P5KE15A 16.7 18.5 1 15 1 24.4 20.6 .087 P5KE16 17.8 21.8 1 16 1 28.8 17.6 .088 P5KE16A 17.8 19.7 1 16 1 26.0 19.2 .088 P5KE17 18.9 23.1 1 17 1 30.5 16.4 .090 P5KE17A 18.9 20.9 1 17 1 27.6 18.1 .090 P5KE18 20.0 24.4 1 18 1 32.2 15.5 .092 P5KE18A 20.0 22.1 1 18 1 29.2 17.2 .092 P5KE20 22.2 27.1 1 20 1 35.8 13.9 .093 P5KE20A 22.2 24.5 1 20 1 32.4 15.4 .093
MAX.
TEMP.
COEFFICIENT
OF V
-55°°°°C TO 175°°°°C
αααα
(BR)
V(BR)
°°°°
C
SA4-57.PDF 03-20-00
Loading...
+ 3 hidden pages