8700 E. Thomas Road
Scottsdale, AZ 85252
Phone: (480) 941-6300
Fax: (480) 947-1503
P5KE5.0
thru
FEATURES:
ECONOMICAL SERIES
•
AVAILABLE IN BOTH UNIDIRECTIONAL AND BI-DIRECTIONAL CONSTRUCTION
•
5.0 TO 170 STAND-OFF VOLTAGE AVAILABLE
•
500 WATTS PEAK PULSE POWER DISSIPATION
•
QUICK RESPONSE
•
DESCRIPTION:
DESCRIPTION:
DESCRIPTION:DESCRIPTION:
This Transient Voltage Suppressor is an economical, molded, commercial product
used to protect voltage sensitive components from destruction or partial degradation.
The response time of their clamping action is virtually instantaneous (1 x 10
seconds) and they have a peak pulse power rating of 500 watts for 1 ms as depicted in
Figure 1 and 2. Microsemi also offers a great variety of other Transient Voltage
Suppressor's to meet higher and lower power demands and special applications.
MAXIMUM RATINGS:
MAXIMUM RATINGS:
MAXIMUM RATINGS:MAXIMUM RATINGS:
Peak Pulse Power Dissipation at 25
Steady State Power Dissipation: 2.5 Watts at T
C: 500 Watts
°°°°
= +75
L
C
°°°°
3/8" Lead Length
t
clamping
Operating and Storage Temperature: -55
(0 volts to BV Min.):
Unidirectional <1x10
TYPICAL CHARACTERISTIC CURVES
-12
Seconds: Bi-directional <5x10-9 Seconds.
to +175
°°°°
C
°°°°
-12
P5KE170A
5.0 thru 170 volts
500 Watts
Transient Voltage
Suppressors
DO-41
∅∅∅∅
2 x
.032 ± .002
[.81 ± .05]
∅∅∅∅
.107
[2.72]
max.
100
75
Peak Power
(Single pulse)
50
25
POWER IN PERCENT OF 25°C RATING
PEAK PULSE POWER (Ppp) OR CONTINUOUS
Continuous
Average Power
Lead Length = 3/8"
0
50
LEAD TEMPERATURE °C
T
L
DERATING CURVE
100 150 175
FIGURE 1
Peak Value Ipp
100
50
PERCENT OF Ipp
PULSE CURRENT IN
1
TIME (t) IN MILLISECONDS
PULSE WAVEFORM FOR
EXPONENTIAL SURGE
Pulse Time Duration
(tp) is Defined as that
point where Ip decays
to 50% of
I surge
23
4
FIGURE 2
.205
[5.21]
MAX.
2 X1.10
[27.94]
MIN.
NOTE: DIMENSIONS IN [ ] =MILLIMETERS
POLARITY
Mark {cathode}
MECHANICAL
CHARACTERISTICS
CASE: Void free transfer
molded thermosetting
plastic.
FINISH: Readily solderable.
POLARITY: Band denotes
cathode. Bi-directional not
marked.
WEIGHT: 0.7 gram (Appx.).
MOUNTING POSITION: Any
SA4-57.PDF 03-20-00
P5KE5.0
thru
P5KE170A
ELECTRICAL CHARACTERISTICS AT 25°C
PART
NUMBER
BREAKDOWN
VOLTAGE V(BR)
MIN. MAX
VOLTS VOLTS
TEST
CURRENT
I
T
VOLTAGE
mA VOLTS
RATED
STAND
OFF
V
WM
MAX. REVERSE
STANDBY
CURRENT
ID @
V
WM
ADC VOLTS AMP % /
µµµµ
MAX.
PEAK
REVERSE
VOLTAGE
VC MA X.
@ I
PP
MAX. PEAK
PULSE
CURRENT
I
PP
(Figure 2)
P5KE5.0 6.40 7.30 10 5.0 600 9.6 52 .057
P5KE5.0A 6.40 7.00 10 5.0 600 9.2 54.3 .057
P5KE6.0 6.67 8.15 10 6.0 600 11.4 43.9 .059
P5KE6.0A 6.67 7.37 10 6.0 600 10.3 48.5 .059
P5KE6.5 7.22 8.82 10 6.5 400 12.3 40.7 .061
P5KE6.5A 7.22 7.98 10 6.5 400 11.2 44.7 .061
P5KE7.0 7.78 9.51 10 7.0 150 13.3 37.8 .065
P5KE7.0A 7.78 8.60 10 7.0 150 12.0 41.7 .065
P5KE7.5 8.33 10.2 1 7.5 50 14.3 35.0 .067
P5KE7.5A 8.33 9.21 1 7.5 50 12.9 38.8 .067
P5KE8.0 8.89 10.9 1 8.0 25 15.0 33.3 .070
P5KE8.0A 8.89 9.83 1 8.0 25 13.6 36.7 .070
P5KE8.5 9.44 11.5 1 8.5 5 15.9 31.4 .073
P5KE8.5A 9.44 10.4 1 8.5 5 14.4 34.7 .073
P5KE9.0 10.0 12.2 1 9.0 1 16.9 29.5 .076
P5KE9.0A 10.0 11.1 1 9.0 1 15.4 32.5 .076
P5KE10 11.1 13.6 1 10 1 18.8 26.6 .078
P5KE10A 11.1 12.3 1 10 1 17.0 29.4 .078
P5KE11 12.2 14.9 1 11 1 20.1 24.9 .081
P5KE11A 12.2 13.5 1 11 1 18.2 27.4 .081
P5KE12 13.3 16.3 1 12 1 22.0 22.7 .082
P5KE12A 13.3 14.7 1 12 1 19.9 25.1 .082
P5KE13 14.4 17.6 1 13 1 23.8 21.0 .084
P5KE13A 14.4 15.9 1 13 1 21.5 23.2 .084
P5KE14 15.6 19.1 1 14 1 25.8 19.4 .086
P5KE14A 15.6 17.2 1 14 1 23.2 21.5 .086
P5KE15 16.7 20.4 1 15 1 26.9 18.8 .087
P5KE15A 16.7 18.5 1 15 1 24.4 20.6 .087
P5KE16 17.8 21.8 1 16 1 28.8 17.6 .088
P5KE16A 17.8 19.7 1 16 1 26.0 19.2 .088
P5KE17 18.9 23.1 1 17 1 30.5 16.4 .090
P5KE17A 18.9 20.9 1 17 1 27.6 18.1 .090
P5KE18 20.0 24.4 1 18 1 32.2 15.5 .092
P5KE18A 20.0 22.1 1 18 1 29.2 17.2 .092
P5KE20 22.2 27.1 1 20 1 35.8 13.9 .093
P5KE20A 22.2 24.5 1 20 1 32.4 15.4 .093
MAX.
TEMP.
COEFFICIENT
OF V
-55°°°°C TO
175°°°°C
αααα
(BR)
V(BR)
°°°°
C
SA4-57.PDF 03-20-00