Microsemi Corporation MM054 Datasheet

2830 S. Fairview St.

CIRCUIT

Santa Ana, CA 92704 PH: (714) 979-8220 FAX: (714) 966-5256

MM054

Features

• High current capability, easy to parallel to further boost up performance

• Compact and rugged construction offering weight and space savings

• Available with PC board solderable pins (see mechanical outline below)

or threaded terminals (add “T” suffix to part number, see option below)

• HPM (Hermetic Power Module)

• Isolation voltage capability (in reference to the base) in excess of 3kV

• Very low thermal resistance

• Thermally matched construction provides excellent temperature and

power cycling capability

• Additional voltage ratings or terminations available upon request

• MIL-PRF-19500 screening available upon request

DISCHARGE: 100 A

CHARGE: 20 A

BATTERY

BYPASS

Maximum Ratings per leg @ 25°C (unless otherwise specified)

PART NUMBER SYMBOL MAX. UNIT

Discharge Current ID 100 Amps Charge Current IC 20 Amps Non-Repetitive Peak Surge Current (discharge) IDSM 500 Amps Non-Repetitive Peak Surge Current (charge) ICSM 200 Amps Operating and Storage Junction Temperature Range Tj

Tstg

Thermal resistance, junction to base, discharge Thermal resistance, junction to base , charge

RΘjbD RΘjbC

-55 to +175

0.7

(typ. 0.5)

0.9

(typ. 0.75)

°C °C/W °C/W

Mechanical Outline

Datasheet# MSC0322A

MM054

Electrical Parameters, DISCHARGE circuit @ 25°C (unless otherwise specified)

DESCRIPTION SYMBOL CONDITIONS MIN TYP. MAX UNIT

Forward Voltage, note 1 VD1 IF= 10 A, 350 340 mV Forward Voltage, note 1 VD2 IF= 20 A, 400 470 mV Forward Voltage, note 1 VD3 IF= 40 A, 490 600 mV Forward Voltage, note 1 VD4 IF= 80 A, 530 800 mV Forward Voltage, note 1 VD5 IF= 100 A, 750 - mV Forward Voltage, note 1 VD6 Forward Voltage, note 1 VD7

note: see 1N6790 data sheet for full electrical characteristics of the discharge schottky diode

IF= 20 A, TA= -55°C IF= 20 A, TA= 125°C

Electrical Parameters, CHARGE circuit @ 25°C (unless otherwise specified)

490 590 mV 320 - mV

DESCRIPTION SYMBOL CONDITIONS MIN TYP. MAX UNIT

Forward Voltage, note 1 VC1 IF= 50 mA 2 2.1 - V Forward Voltage, note 1 VC2 IF= 100 mA - 2.2 - V Forward Voltage, note 1 VC3 IF= 5 A, 2.6 2.7 V Forward Voltage, note 1 VC4 IF= 10 A, 2.7 3.0 V Forward Voltage, note 1 VC5 IF= 20 A, 2.85 3.3 V Forward Voltage, note 1 VC4

IF= 10 A, TA= 125°C

2.35 2.7 V

Notes

(1) Pulse test, t ≤ 300 µs, duty cycle δ ≤ 2%