Microsemi Corporation 1PMT4627, 1PMT4617, 1PMT4616, 1PMT4615, 1PMT4614 Datasheet

...

8700 E. Thomas Road

1PMT4614 thru 1PMT4627 1PMT4099 thru 1PMT4135

Mechanical Characteristics

• Tape & Reel EIA Standard 481

DO-216

Inches

All dimensions +/- .005 inches

Scottsdale, AZ 85251 Tel: (480) 941-6300 Fax: (480) 947-1503

Description

In Microsemi's Powermite® surface mount package, these zener diodes provide power-handling capabilities found in larger packages. In addition to its size advantages, Powermite bottom that eliminates the possibility of solder flux entrapment during assembly, and a unique locking tab acts as an integral heat sink. Its innovative design makes this device ideal for use with automatic insertion equipment.

package features include a full metallic

Features

• Surface Mount Packaging

• Integral Heat Sink Locking Tabs

• Compatible with automatic insertion equipment

• Full metallic bottom eliminates flux entrapment

• Zener voltage 1.8 to 100V

• Low noise

• Low reverse leakage current

• Tight tolerance available

Maximum Ratings

• Junction and storage temperatures: -55°C to +150°C

• DC power dissipation: 1 watt

• Forward voltage:

@ 200 mA 1.1 volts

• Cathode designated by TAB 1

• Mounting position any way

• Molded package

• Weight: 0.016 gram (approximate)

• Thermal resistance 30°C/W junction to

TAB 1

Packaging

POWERMITE

LOW NOISE 1 WATT

Zener Diodes

and

CIRCUIT DIAGRAM

Mechanical Specifications Mounting Pad Dimensions

MSC0994.PDF ISO 9001 CERTIFIED REV F 10/27/99

1PMT4614 thru 4627 and 1PMT4099 thru 4135

Electrical Characteristics @ 25°°C

TYPICAL

NOMINAL

ZENER

MICROSEMI

NUMBER

1PMT4614 614 1.8 250 1200 7.5 1.0 1 262.4 -0.075 1PMT4615 615 2.0 250 1250 5.0 1.0 1 240.6 -0.075 1PMT4616 616 2.2 250 1300 4.0 1.0 1 218.7 -0.075 1PMT4617 617 2.4 250 1400 2.0 1.0 1 207.8 -0.075 1MPT4618 618 2.7 250 1500 1.0 1.0 1 196.8 -0.075 1PMT4619 619 3.0 250 1600 0.8 1.0 1 190.3 -0.075 1PMT4620 620 3.3 250 1650 7.5 1.5 1 185.9 -0.075 1PMT4621 621 3.6 250 1700 7.5 2.0 1 181.5 -0.065 1PMT4622 622 3.9 250 1650 5.0 2.0 1 174.9 -0.060 1PMT4623 623 4.3 250 1600 4.0 2.0 1 168.4 -0.050 1PMT4624 624 4.7 250 1550 10 3.0 1 164.0 -0.040 +0.020 1PMT4625 625 5.1 250 1500 10 3.0 2 153.1 -0.045 +0.030 1PMT4626 626 5.6 250 1400 10 4.0 4 142.2 -0.020 +0.040 1PMT4627 627 6.2 250 1200 10 5.0 5 133.4 -0.010 +0.050 1PMT4099 099 6.8 250 200 10 5.17 40 122.5 0.040 1PMT4100 100 7.5 250 200 10 5.70 40 111.5 0.045 1PMT4101 101 8.2 250 200 1.0 6.24 40 100.6 0.048 1PMT4102 102 8.7 250 200 1.0 6.61 40 96.2 0.049 1PMT4103 103 9.1 250 200 1.0 6.92 40 91.9 0.050 1PMT4104 104 10 250 200 1.0 7.60 40 83.1 0.055 1PMT4105 105 11 250 200 .05 8.44 40 76.5 0.060 1PMT4106 106 12 250 200 .05 9.12 40 69.9 0.065 1PMT4107 107 13 250 200 .05 9.87 40 63.4 0.065 1PMT4108 108 14 250 200 .05 10.65 40 59.0 0.070 1PMT4109 109 15 250 100 .05 11.40 40 54.8 0.070 1PMT4110 110 16 250 100 .05 12.15 40 52.5 0.070 1PMT4111 111 17 250 100 .05 12.92 40 48.1 0.075 1PMT4112 112 18 250 100 .05 13.37 40 45.9 0.075 1PMT4113 113 19 250 150 .05 14.44 40 43.7 0.075 1PMT4114 114 20 250 150 .01 15.20 40 41.6 0.075 1PMT4115 115 22 250 150 .01 16.72 40 37.2 0.080 1PMT4116 116 24 250 150 .01 18.25 40 34.9 0.080 1PMT4117 117 25 250 150 .01 19.00 40 32.8 0.080 1PMT4118 118 27 250 150 .01 20.45 40 30.6 0.085 1PMT4119 119 28 250 200 .01 21.28 40 30.6 0.085 1PMT4120 120 30 250 200 .01 22.80 40 28.4 0.085 1PMT4121 121 33 250 200 .01 25.08 40 26.2 0.085 1PMT4122 122 36 250 200 .01 27.38 40 24.0 0.090 1PMT4123 123 39 250 200 .01 29.65 40 21.4 0.090 1PMT4124 124 43 250 250 .01 32.65 40 19.5 0.090 1PMT4125 125 47 250 250 .01 35.75 40 17.7 0.090 1PMT4126 126 51 250 300 .01 38.76 40 16.4 0.090 1PMT4127 127 56 250 300 .01 42.60 40 14.7 0.090 1PMT4128 128 60 250 400 .01 45.60 40 13.9 0.090 1PMT4129 129 62 250 500 .01 47.10 40 13.3 0.090 1PMT4130 130 68 250 700 .01 51.68 40 12.2 0.095 1PMT4131 131 75 250 700 .01 57.00 40 11.2 0.095 1PMT4132 132 82 250 800 .01 62.32 40 10.1 0.095 1PMT4133 133 87 250 1000 .01 66.12 40 9.6 0.095 1PMT4134 134 91 250 1200 .01 69.16 40 9.2 0.095 1PMT4135 135 100 250 1500 .01 76.00 40 8.3 0.095

DEVICE

MARKING

VOLTAGE

(1)

VZ@I

VOLTS

ZENER

TEST CURRENT

µµA

MAXIMUM

ZENER

IMPEDANCE

(2)

OHMS

MAXIMUM REVERSE CURRENT

IZ@V

µµA

VOLTS

MAXIMUM

NOISE

DENSITY

ND@I

µµV/√√HZ

MAXIMUM

ZENER

CURRENT

(3)

TEMPERATURE

COEFFICIENT

OF ZENER VOLTAGE

αα

%/°°C

NOTE 1: Product shown has a standard tolerance of ±5% on the nominal zener voltage. Also available in 2% and 1% tolerance with suffix C

and D respectively. VZ is measured at IZT with Tc (TAB 1) at 30°C.

NOTE 2: Zener impedance is derived by superimposing on IZT a 60 Hz rms ac current equal to 10% of IZT (25 µA ac.). NOTE 3: Based upon 1 W maximum power dissipation. Allowance has been made for the higher voltage associated with operation at higher

currents and temperature. For determination of voltage change with current deviations from IZT see Micro Note 202

MSC0994.PDF ISO 9001 CERTIFIED REV F 10/27/99