Microsemi 1N6267, 1N6303A User Manual

查询1N6270A供应商

1N6267 thru 1N6303A

1.5KE6.8 thru 1.5KE400A

SCOTTSDALE DIVISION

The Transient Voltage Suppressor (TVS) series for 1N5908 & 1N6267-1N6303A

DESCRIPTION

Unidirectional & Bidirectional

Transient Voltage Suppressors

are JEDEC registered selections for unidirectional devices. The popular series of 1.5KE6.8-1.5KE400A offers similar voltages with an extended voltage range and also provides bidirectional options with a C or CA suffix. All have the same high Peak Pulse Power rating of 1500 W and extremely fast response time. They can protect from secondary lightning effects per IEC61000-4-5 and class levels described herein as well as inductive switching environments and induced RF protection. Since their response time is virtually instantaneous, they can also protect from ESD and EFT per IEC61000-4-2 and IEC61000-4-4.

IMPORTANT: For the most current data, consult

• Economical TVS series for thru-hole mounting

• Available in both Unidirectional and Bidirectional (add

C or CA suffix for bi-directional)

• Voltages from 6.8 to 400 V Breakdown (V

• Suppresses transients up to 1500 watts @ 10/1000 µs

(see Figure 1)

• Fast response

• Options for screening in accordance with MIL-PRF-

19500 for JAN, JANTX, JANTXV, and JANS are available by adding MQ, MX, MV, or MSP prefixes respectively to part numbers.

• Surface mount equivalent packages are available as SMCJ5.0 - SMCJ170CA or SMCG5.0 - SMCG170CA (consult factory for other surface mount options)

• Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B

• Peak Pulse Power dissipation at 25 10/1000 µs (also see Fig 1,2, and 3)

• Impulse repetition rate (duty factor): 0.01%

• t

• Operating and Storage temperature: -65

• Thermal Resistance: 22

• Steady-State Power dissipation: 5 watts at T

• Forward Surge: 200 Amps peak impulse of 8.3 ms

• Solder temperatures: 260

(0 volts to V

clamping

unidirectional and < 5 ns for bidirectional

inch (10 mm) from body, or 82 when mounted on FR4 PC board with 4 mm pads (1oz) and track width 1 mm, length 25 mm

or 1.52 watts at T board described for thermal resistance

half-sine wave at 25ºC (unidirectional only)

FEATURES

MAXIMUM RATINGS

min.): < 100 ps theoretical for

(BR)

C/W junction to lead at 3/8

C/W junction to ambient

= 25ºC when mounted on FR4 PC

C for 10 s (maximum)

8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

MICROSEMI’s

)

C: 1500 watts at

C to +150ºC

copper

= 40oC,

Microsemi

Scottsdale Division

website: http://www.microsemi.com

• Protection from switching transients and induced RF

• Protection from ESD and EFT per IEC 61000-4-2 and

• Secondary lightning protection per IEC61000-4-5 with

Class 1: 1.5KE6.8A to 1.5KE200A or CA * Class 2: 1.5KE5.0A to 1.5KE180A or CA * Class 3: 1.5KE5.0A to 1.5KE91A or CA * Class 4: 1.5KE5.0A to 1.5KE43A or CA *

• Secondary lightning protection per IEC61000-4-5 with

Class 1 : 1.5KE5.0A to 1.5KE110A or CA * Class 2: 1.5KE5.0A to 1.5KE56A or CA * Class 3: 1.5KE5.0A to 1.5KE27A or CA * Class 4: 1.5KE5.0A to 1.5KE13A or CA *

• Secondary lightning protection per IEC61000-4-5 with

Class 2: 1.5KE5.0A to 1.5KE24A or CA * Class 3: 1.5KE5.0 to 1.5KE12A or CA * * Also applies to 1N5908 and 1Nxxxx of same voltage

• CASE: Void-free transfer molded thermosetting

• TERMINATIONS: Tin-lead plated solderable per

• POLARITY: Cathode indicated by band. No

• MARKING: Part number

• TAPE & REEL option: Standard per EIA-296 (add

• WEIGHT: 1.5 grams (approximate)

• See package dimensions on last page

APPLICATIONS / BENEFITS

IEC 61000-4-4

42 Ohms source impedance:

12 Ohms source impedance:

2 Ohms source impedance:

MECHANICAL AND PACKAGING

epoxy body meeting UL94V-0

MIL-STD-750, method 2026

marking on bidirectional devices

“TR” suffix to part number)

APPEARANCE

WWW.

Microsemi

CASE 1

Page 1

. COM

1.5KE6.8 – 1N6267 – 1N6303A

1.5KE400A

1N6267 thru 1N6303A

1.5KE6.8 thru 1.5KE400A

SCOTTSDALE DIVISION

ELECTRICAL CHARACTERISTICS

Rated

Industry

Type

Number

- 1N5908 5.0 6.0 – - 1 7.6 300 30 .057

1.5KE6.8

1.5KE6.8A

1.5KE7.5

1.5KE7.5A

1.5KE8.2

1.5KE8.2A

1.5KE9.1

1.5KE9.1A

1.5KE10

1.5KE10A

1.5KE11

1.5KE11A

1.5KE12

1.5KE12A

1.5KE13

1.5KE13A

1.5KE15

1.5KE15A

1.5KE16

1.5KE16A

1.5KE18

1.5KE18A

1.5KE20

1.5KE20A

1.5KE22

1.5KE22A

1.5KE24

1.5KE24A

1.5KE27

1.5KE27A

1.5KE30

1.5KE30A

1.5KE33

1.5KE33A

1.5KE36

1.5KE36A

1.5KE39

1.5KE39A

1.5KE43

1.5KE43A

1.5KE47

1.5KE47A

1.5KE51

1.5KE51A

1.5KE56

1.5KE56A

1.5KE62

1.5KE62A

1.5KE68

1.5KE68A

1.5KE75

1.5KE75A

JEDEC

Type

Number

1N6267 1N6267A 1N6268 1N6268A 1N6269 1N6269A 1N6270 1N6270A 1N6271 1N6271A 1N6272 1N6272A 1N6273 1N6273A 1N6274 1N6274A 1N6275 1N6275A 1N6276 1N6276A 1N6277 1N6277A 1N6278 1N6278A 1N6279 1N6279A 1N6280 1N6280A 1N6281 1N6281A 1N6282 1N6282A 1N6283 1N6283A 1N6284 1N6284A 1N6285 1N6285A 1N6286 1N6286A 1N6287 1N6287A 1N6288 1N6288A 1N6289 1N6289A 1N6290 1N6290A 1N6291 1N6291A 1N6292 1N6292A

Standoff

Voltage

(NOTE 1)

Volts

5.50

5.80

6.05

6.40

6.63

7.02

7.37

7.78

8.10

8.55

8.92

9.40

9.72

10.220

10.50

11.10

12.10

12.80

12.90

13.60

14.50

15.30

16.20

17.10

17.80

18.80

19.40

20.50

21.80

23.10

24.30

25.60

26.80

28.20

29.10

30.80

31.60

33.30

34.80

36.80

38.10

40.20

41.30

43.60

45.40

47.80

50.20

53.00

55.10

58.10

60.70

64.10

Breakdown

Voltage

@ I

(BR)

Volts

Min. Max.

6.12 – 7.48

6.45 – 7.14

6.75 – 8.25

7.13 – 7.88

7.38 – 9.02

7.79 – 8.61

8.19 – 10.00

8.65 – 9.55

9.00 – 11.00

9.50 – 10.50

9.90 – 12.10

10.50 – 11.60

10.80 – 13.20

11.40 – 12.60

11.70 – 14.30

12.40 – 13.70

13.50 – 16.50

14.30 – 15.80

14.40 – 17.60

15.20 – 16.80

16.20 – 19.80

17.10 – 18.90

18.00 – 22.00

19.00 – 21.00

19.80 – 24.20

20.90 – 23.10

21.60 – 26.40

22.80 – 25.20

24.30 – 29.70

25.70 – 28.40

27.00 – 33.00

28.50 – 31.50

29.70 – 36.30

31.40 – 34.70

32.40 – 39.60

34.20 – 37.80

35.10 – 42.90

37.10 – 41.00

38.70 – 47.30

40.90 – 45.20

42.30 – 51.70

44.70 – 49.40

45.90 – 56.10

48.50 – 53.60

50.40 – 61.60

53.20 – 58.80

55.80 – 68.20

58.90 – 65.10

61.20 – 74.80

64.60 – 71.40

67.50 – 82.50

71.30 – 78.80

(BR)

10 10 10 10 10 10

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Unidirectional & Bidirectional

Transient Voltage Suppressors

Maximum Clamping

Voltage

108.0

103.0

@ IPP

Volts

10.8

10.5

11.7

11.3

12.5

12.1

13.8

13.4

15.0

14.5

16.2

15.6

17.3

16.7

19.0

18.2

22.0

21.2

23.5

22.5

26.5

25.2

29.1

27.7

31.9

30.6

34.7

33.2

39.1

37.5

43.5

41.4

47.7

45.7

52.0

49.9

56.4

53.9

61.9

59.3

67.8

64.8

73.5

70.1

80.5

77.0

89.0

85.0

98.0

92.0

Maximum

Standby

Current

@ V

1000 1000

500 500 200 200

50 50 10 10

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

Maximum

Peak Pulse

Current

(Fig. 2)

139.0

143.0

128.0

132.0

120.0

124.0

109.0

112.0

100.0

103.0

93.0

96.0

87.0

90.0

79.0

82.0

68.0

71.0

64.0

67.0

56.5

59.5

51.5

54.0

47.0

49.0

43.0

45.0

38.5

40.0

34.5

36.0

31.5

33.0

29.0

30.0

26.5

28.0

24.0

25.3

22.2

23.2

20.4

21.4

18.6

19.5

16.9

17.7

15.3

16.3

13.9

14.6

WWW.

Maximum

Temperature

Coefficient of

(BR)

V(BR)

.057 .057 .061 .061 .065 .065 .068 .068 .073 .073 .075 .075 .078 .078 .081 .081 .084 .084 .086 .086 .088 .088 .090 .090 .092 .092 .094 .094 .096 .096 .097 .097 .098 .098 .099 .099 .100 .100 .101 .101 .101 .101 .102 .102 .103 .103 .104 .104 .104 .104 .105 .105

Microsemi

. COM

1.5KE6.8 – 1N6267 – 1N6303A

1.5KE400A

Microsemi

Scottsdale Division

8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

Page 2

+ 4 hidden pages