Microsemi 1N6036, 1N6072A User Manual
SCOTTSDALE DIVISION
1N6036 and 1N6072A
1500 WATT BIDIRECTIONAL
TRANSIENT VOLTAGE SUPPRESSOR
This popular Transient Voltage Suppressor (TVS) series for 1N6036 thru
DESCRIPTION
APPEARANCE
1N6072A are JEDEC registered selections for bidirectional devices. All
have the same high Peak Pulse Power rating of 1500 W with extremely fast
response times. They are also available in military qualified selections as
described in the Features section herein. They are most often used for
protecting against transients from inductive switching environments,
induced RF effects, or induced secondary lightning effects as found in
lower surge levels of IEC61000-4-5. They are also very successful in
protecting airborne avionics and electrical systems. Since their response
time is virtually instantaneous, they can also protect from ESD and EFT per
IEC61000-4-2 and IEC61000-4-4.
IMPORTANT: For the most current data, consult
• Bidirectional TVS series for thru-hole mounting
• Suppresses transients up to 1500 watts @ 10/1000
µs (see Figure 1)
• Clamps transient in less than 100 pico seconds
• Working voltage (V
• Hermetic sealed DO-13 metal package
• JAN/TX/TXV military qualifications also available per
MIL-PRF-19500/507 for the tighter tolerance “A”
suffix types by adding the JAN, JANTX, or JANTXV
prefix, e.g. JANTXV1N6036A, etc.
• For unidirectional TVS in the same DO-13 package,
see separate data sheet for the 1N5629 – 1N5665A
series (also military qualified)
• Surface mount equivalent packages also available
as SMCJ5.0C - SMCJ170CA or SMCG5.0C –
SMCG170CA in separate data sheet (consult factory
for other surface mount options)
• Plastic axial-leaded equivalents available in the
1.5KE6.8C – 1.5KE220CA series in separate data
sheet
• 1500 Watts for 10/1000 µs
or less*
4)
• Operating & Storage Temperatures: -65
• THERMAL RESISTANCE: 50
0.375 inches (10 mm) from body or 110
ambient when mounted on FR4 PC board with 4 mm
copper pads (1oz) and track width 1 mm, length 25 mm
• DC Power Dissipation
mm) from body (see derating in Fig 3 and note below)
• Solder Temperatures: 260
at lead temperature (TL) 25oC (see Figs. 1, 2, &
FEATURES
) range 5.5 V to 185 V
WM
MAXIMUM RATINGS
with repetition rate of 0.01%
o
C/W junction to lead at
*: 1 Watt at T
o
C for 10 s (maximum)
L
MICROSEMI’s
o
to +175oC
o
C/W junction to
< +125oC 3/8” (10
website: http://www.microsemi.com
2
• Protection from switching transients and induced RF
• Protection from ESD and EFT per IEC 61000-4-2
• Secondary lightning protection per IEC61000-4-5
Class 1: 1N6036 to 1N6072A
Class 2: 1N6036 to 1N6067A
Class 3: 1N6036 to 1N6061A
Class 4: 1N6036 to 1N6054A
• Secondary lightning protection per IEC61000-4-5
Class 1 : 1N6036 to 1N6064A
Class 2: 1N6036 to 1N6057A
Class 3: 1N6036 to 1N6049A
Class 4: 1N6036 to 1N6042A
• Secondary lightning protection per IEC61000-4-5
Class 2: 1N6036 to 1N6048A
Class 3: 1N6036 to 1N6041A
• Inherently radiation hard as described in Microsemi
• CASE: DO-13 (DO-202AA), welded, hermetically
• FINISH: All external metal surfaces are Tin-Lead
• POLARITY: Not applicable for bidirectional TVS
• MARKING: Part number
• WEIGHT: 1.4 grams. (Approx)
• TAPE & REEL option: Standard per EIA-296 (add
• See package dimension on last page
APPLICATIONS / BENEFITS
and IEC 61000-4-4
with 42 Ohms source impedance:
with 12 Ohms source impedance:
with 2 Ohms source impedance:
MicroNote 050
MECHANICAL AND PACKAGING
sealed metal and glass
plated and solderable per MIL-STD-750 method
2026
“TR” suffix to part number)
DO-13
(DO-202AA)
* TVS devices are not typically used for dc power dissipation and are instead operated at or less than their rated standoff voltage
(V
) except for transients that briefly drive the device into avalanche breakdown (VBR to VC region).
WM
Copyright 2002
11-06-2003 REV A
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Microsemi
Scottsdale Division
Page 1
WWW.
Microsemi
. COM
1N6036 thru 1N6072A
1N6036 and 1N6072A
1500 WATT BIDIRECTIONAL
SCOTTSDALE DIVISION
ELECTRICAL CHARACTERISTICS @ 25oC (Test Both Polarities)
JEDEC
Type
No.
1N6036
*1N6036A
1N6037
*1N6037A
1N6038
*1N6038A
1N6039
*1N6039A
1N6040
*1N6040A
1N6041
*1N6041A
1N6042
*1N6042A
1N6043
*1N6043A
1N6044
*1N6044A
1N6045
*1N6045A
1N6046
*1N6046A
1N6047
*1N6047A
1N6048
*1N6048A
1N6049
*1N6049A
1N6050
*1N6050A
1N6051
*1N6051A
1N6052
*1N6052A
1N6053
*1N6053A
1N6054
*1N6054A
1N6055
*1N6055A
1N6056
*1N6056A
1N6057
*1N6057A
1N6058
*1N6058A
1N6059
*1N6059A
1N6060
*1N6060A
1N6061
*1N6061A
Rated
Standoff
Voltage
V
WM
(NOTE 1)
Volts
5.5
6.0
6.5
7.0
7.0
7.5
8.0
8.5
8.5
9.0
9.0
10.0
10.0
11.0
11.0
12.0
12.0
13.0
14.0
15.0
16.0
17.0
17.0
18.0
19.0
20.0
21.0
22.0
24.0
25.0
26.0
28.0
29.0
30.0
31.0
33.0
34.0
36.0
38.0
40.0
41.0
43.0
45.0
47.0
48.0
53.0
55.0
58.0
60.0
64.0
66.0
70.0
V
(BR)
Volts
6.75
7.13
7.38
7.79
8.19
8.65
10.5
10.8
11.4
11.7
12.4
13.5
14.3
14.4
15.2
16.2
17.1
18.0
19.0
19.8
20.9
21.6
22.8
24.3
25.7
27.0
28.5
29.7
31.4
32.4
34.2
35.1
37.1
38.7
40.9
42.3
44.7
45.9
48.5
50.4
53.2
55.8
58.9
61.2
64.6
67.5
71.3
73.8
77.9
min V
9.0
9.5
9.9
Breakdown
Voltage
V
(BR)
max @ I
(BR)
Volts
8.25
7.88
9.02
8.61
10.00
9.55
11.0
10.5
12.1
11.6
13.2
12.6
14.3
13.7
16.5
15.8
17.5
16.8
19.8
18.9
22.0
21.0
24.2
23.1
26.4
25.2
29.7
28.4
33.0
31.5
36.3
34.7
39.6
37.8
42.9
41.0
47.3
45.2
51.7
49.4
56.1
53.6
61.6
58.8
68.2
65.1
74.8
71.4
82.5
78.8
90.2
86.1
(BR)
mA
10
10
10
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
TRANSIENT VOLTAGE SUPPRESSOR
Maximum
Clamping
Voltage
@ IPP
V
C
Volts
11.7
11.3
12.5
12.1
13.8
13.4
15.0
14.5
16.2
15.6
17.3
16.7
19.0
18.2
22.0
21.2
23.5
22.5
26.5
25.2
29.1
27.7
31.9
30.6
34.7
33.2
39.1
37.5
43.5
41.4
47.7
45.7
52.0
49.9
56.4
53.9
61.9
59.3
67.8
64.8
73.5
70.1
80.5
77.0
89.0
85.0
98.0
92.0
108.0
103.0
118.0
113.0
Maximum
Standby
Current
@ V
I
D
WM
µ
A
1000
1000
500
500
200
200
50
50
10
10
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
Maximum
Peak Pulse
Current
I
PP
(See Fig. 2)
Amps
128
132
120
124
109
112
100
103
93
96
87
90
79
82
68
71
64
67
56.5
59.5
51.5
54
47
49
43
45
38.5
40
34.5
36
31.5
33
29
30
26.5
28
24
25.3
22.2
23.2
20.4
21.4
18.6
19.5
16.9
17.7
15.3
16.3
13.9
14.6
12.7
13.3
Maximum
Temperature
Coefficient of
V
(BR)
α
V(BR)
o
C
%/
.061
.061
.065
.065
.068
.068
.073
.073
.075
.075
.078
.078
.081
.081
.084
.084
.086
.086
.088
.088
.090
.090
.092
.092
.094
.094
.095
.096
.097
.097
.098
.098
.099
.099
.100
.100
.101
.101
.101
.101
.102
.102
.103
.103
.104
.104
.104
.104
.105
.105
.105
.105
WWW.
Microsemi
. COM
1N6036 thru 1N6072A
Copyright 2002
11-06-2003 REV A
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 2
Loading...