Microsemi 1N4954, 1N4996 User Manual

1N4954 thru 1N4996, 1N5968 thru 1N5969, and
1N6632 thru 1N6637
SCOTTSDALE DIVISION
This Zener Voltage Regulator series is military qualified to MIL-PRF-
DESCRIPTION
19500/356 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using an internal metallurgical bond. It includes Zener selections from 3.3 to 390 volts in standard 5% tolerances as well as tighter tolerances identified by different suffix letters on the part number. They are also available in surface-mount packages (see separate data sheet for 1N4954US thru 1N4996US, 1N5968US thru 1N5969US, and 1N6632US thru 1N6637US). Microsemi also offers numerous other Zener products to meet higher and lower power ratings in both thru-hole and surface mount packages.
IMPORTANT: For the most current data, consult
Popular JEDEC registered series
Voidless hermetically sealed glass package
Extremely robust construction
Triple-layer passivation
Internal “Category I” Metallurgical bonds for 1N4954
thru 1N4996, and “Category III” for 1N6632 thru 1N6637 as well as 1N5968 thru 1N5959
JAN, JANTX, JANTXV, and JANS available per MIL­PRF-19500/356
Surface mount equivalents also available in a square end-cap MELF configuration with “US” suffix (see separate data sheet for 1N4954US thru 1N4996US, 1N6632US thru 1N6637US and 1N5968US thru 1N5969US
Operating Temperature: -65
Storage Temperature: -65
Power Dissipation: 5 Watts @ T
Thermal Resistance: 22
inch (10 mm) from body for 1N4954 thru 1N4996 and 30oC/W for 1N6632 thru 1N6637, 1N5968 thru 1N5969
Thermal Impedance at 10 ms: 1.8 thru 1N4996, and 3.0 1N6637 & 1N5968 thru 1N5969
Forward Voltage: 1.50 V at 1.0 A
FEATURES
MAXIMUM RATINGS
o
C to +175oC.
o
C to +175oC.
= 25oC
o
o
C/W for both the 1N6632 thru
A
C/W junction to lead at 3/8
o
MICROSEMI’s
C/W for 1N4954
VOIDLESS-HERMETICALLY-SEALED
5 WATT GLASS ZENER DIODES
website: http://www.microsemi.com
Regulates voltage over a broad operating current and
Extensive selection from 3.3 to 390 V
Standard voltage tolerances are plus/minus 5% with
Tight tolerances available in plus or minus 2% or 1%
Flexible axial-lead mounting terminals
Nonsensitive to ESD per MIL-STD-750 Method 1020
Inherently radiation hard as described in Microsemi
CASE: Hermetically sealed voidless hard glass with
TERMINATIONS: Axial-leads are Tin/Lead (Sn/Pb)
MARKING: Body painted and part number, etc.
POLARITY: Cathode indicated by band
Tape & Reel option: Standard per EIA-296
Weight: 750 mg
APPLICATIONS / BENEFITS
temperature range
no suffix
with C or D suffix respectively
MicroNote 050
MECHANICAL AND PACKAGING
Tungsten slugs
over Copper except for JANS with solid Silver (Ag) and no finish
APPEARANCE
WWW.
Microsemi
. COM
1N5968 thru 1N5969
1N6632 thru 1N6637
1N4954 thru 1N4996
“E” Package
Copyright  2005 2-4-2005 REV C
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
1N4954 thru 1N4996, 1N5968 thru 1N5969, and
1N6632 thru 1N6637
SCOTTSDALE DIVISION
VOIDLESS-HERMETICALLY-SEALED
5 WATT GLASS ZENER DIODES
@
*
o
C
VOLTAGE
REGULATION
(Note 1)
V
Z
0.90
0.80
0.75
0.70
0.60
0.50
0.4
0.5
0.7
0.7
0.7
0.7
0.8
0.8
0.8
0.9
1.0
1.1
1.2
1.5
1.8
2.0
2.0
2.5
2.8
3.0
3.0
3.3
3.5
4.0
4.4
5.0
5.5
6.0
6.6
7.5
8.0
9.0 10 11 13 14 16 18 19 22 25 28 32 35 40
MAXIMUM REVERSE
LEAKAGE CURRENT
VOLTAGE
I
R
µ
A 300 250 175
25 20
5
5000 1000
150 100
50 25 25 10 10 10
5 5 5 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
V
R
VOLTS %/
1.0
1.0
1.0
1.0
1.0
1.0
4.28
4.74
5.2
5.7
6.2
6.9
7.6
8.4
9.1
9.9
11.4
12.2
13.7
15.2
16.7
18.2
20.6
22.8
25.1
27.4
29.7
32.7
35.8
38.8
42.6
47.1
51.7
56.0
62.2
69.2
76.0
83.6
91.2
98.8
114.0
121.6
136.8 152 167 182 206 228 251 274 297
ELECTRICAL CHARACTERISTICS @ 25
*I
TYPE*
1N6632 1N6633 1N6634 1N6635 1N6636 1N6637
1N5968 1N5969 1N4954 1N4955 1N4956 1N4957 1N4958 1N4959 1N4960 1N4961 1N4962 1N4963 1N4964 1N4965 1N4966 1N4967 1N4968 1N4969 1N4970 1N4971 1N4972 1N4973 1N4974 1N4975 1N4976 1N4977 1N4978 1N4979 1N4980 1N4981 1N4982 1N4983 1N4984 1N4985 1N4986 1N4987 1N4988 1N4989 1N4990 1N4991 1N4992 1N4993 1N4994 1N4995 1N4996
= 5 mA for 1N5968
ZK
NOMINAL
ZENER
VOLTAGE
@
V
I
Z
VOLTS mA OHMS OHMS VOLTS
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10.0 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91
100 110 120 130 150 160 180 200 220 240 270 300 330 360 390
ZT
TEST
CURRENT
I
ZT
380 350 320 290 260 240
220 220 175 175 150 150 125 125 100 100
75 75 65 65 50 50 50 40 40 30 30 30 25 25 20 20 20 20 15 15 12 12 10 10
8 8 5 5 5 5 5 4 4 3 3
MAXIMUM ZENER
IMPEDANCE
@
Z
Z
I
ZT
3.0
2.5
2.0
2.0
2.0
1.5
1.0
1.0
1.0
1.5
1.5
2.0
2.0
2.5
2.5
3.0
3.5
3.5
4.0
4.5
5.0
5.0
6.0 8
10 11 14 20 25 27 35 42 50 55 80
90 110 125 170 190 330 350 450 500 550 650 800 950
1175 1400 1800
Z
ZK
I
ZK
=1mA
500 500 500 500 450 400
400 1000 1000
800
600
400
125
130
140
145
150
155
160
165
170
175
180
190
200
220
230
240
250
270
320
400
500
620
720
760
800 1000 1150 1250 1500 1650 1750 1850 2000 2050 2100 2150 2200 2300 2500
NOTE 1: Maximum voltage change ∆VZ between 10% of IZM and 50% of IZM
MAXIMUM
TEMPERATURE
COEFF.
α
@
I
VZ
ZT
o
C mA AMPS
-.075
-.070
-.060
-.050 +/-.025 +/-.030
.04 .04 .05 .06 .06 .06 .07 .07 .07 .08 .08
.08 .085 .085 .085 .090 .090 .090 .095 .095 .095 .095 .095 .095 .095 .100 .100 .100 .100 .100 .100 .100 .100 .105 .105 .105 .110 .110 .115 .115 .120 .120 .120 .120 .120
CONTINUOUS
MAXIMUM
CURRENT
I
ZM
1440 1320 1220 1100 1010
930
865 765 700 630 580 520 475 430 395 365 315 294 264 237 216 198 176 158 144 132 122 110 100
92 84 76 70
63.0
58.0
52.5
47.5
43.0
39.5
36.6
31.6
29.4
26.4
23.6
21.6
19.8
17.5
15.6
14.4
13.0
12.0
SURGE
CURRENT
20.0
18.7
17.6
16.4
15.3
14.4
29.3
26.4
9.0
8.0
7.0
6.5
6.0
5.5
5.0
4.5
4.0
3.5
3.2
3.0
2.8
2.5
2.2
2.0
1.8
1.6
1.4
1.2
1.00
0.80
0.75
0.70
0.60
0.50
0.50
0.40
0.35
0.30
0.25
0.22
0.20
I
ZSM
20 20
24 22 20 19 18 16 12 10
WWW.
Microsemi
. COM
1N4954 thru 1N4996
1N5968 thru 1N5969
1N6632 thru 1N6637
Copyright  2005 2-4-2005 REV C
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Loading...
+ 2 hidden pages