Microsemi 1N4099UR, 1N4135UR, 1N4614UR, 1N4627UR User Manual

(

The 1N4099UR thru 1N4135UR and 1N4614UR thru 1N4627UR series of

0.5 watt glass surface mount DO-213AA Zener voltage regulators provides a selection from 1.8 to 100 volts in standard 5% tolerances as well as tighter tolerances identified by different suffix letters on the part number. These are also available with an internal-metallurgical-bond option by adding a “-1” suffix (see separate data sheet) including JAN, JANTX, and JANTXV military qualifications. Microsemi also offers numerous other Zener products to meet higher and lower power applications.

IMPORTANT:

• Surface mount equivalent to JEDEC registered 1N4099

thru 1N4135 and 1N4614 thru 1N4627 series

• Internal metallurgical bond option available by adding a

“-1” suffix that also includes JAN, JANTX, and JANTXV qualifications per MIL-PRF-19500/435 (see separate data sheet for same part numbers with “-1” suffix)

• DO-7 or DO-35 glass body axial-leaded Zener

equivalents also available per JEDEC registration (see separate data sheet for part numbers 1N4099 thru 1N4135 and 1N4614 thru 1N4627 series

• Operating and Storage temperature: -65

• Thermal Resistance: 150

300 board (1 oz Cu) with recommended footprint (see last page)

• Steady-State Power: 0.5 watts at end cap temperature

mounted on FR4 PC board as described for thermal resistance above (see Figure 2 for derating)

• Forward voltage @200 mA: 1.1 volts

• Solder Temperatures: 260

SCOTTSDALE DIVISION

DESCRIPTION

For the most current data, consult MICROSEMI’s website:

FEATURES

MAXIMUM RATINGS

C/W junction to ambient when mounted on FR4 PC

C/W junction to end cap and

< 100oC or ambient temperature TA < 25ºC when

C for 10 s (max)

C to +175ºC

1N4099UR thru 1N4135UR

(or MLL4099 thru MLL4135)

and 1N4614UR thru 1N4627UR or MLL4614 thru MLL4627)

GLASS SURFACE MOUNT 0.5 WATT

ZENERS

http://www.microsemi.com

• Regulates voltage over a broad operating current and

APPLICATIONS / BENEFITS

temperature range

• Extensive selection from 1.8 to 100 V

• Standard voltage tolerances are plus/minus 5% with

no suffix

• Tight tolerances available in plus or minus 2% or 1%

with C or D suffix respectively

• Hermetically sealed surface mount package

• Nonsensitive to ESD per MIL-STD-750 Method 1020

• Minimal capacitance (see Figure 3)

• Inherently radiation hard as described in Microsemi

MicroNote 050

MECHANICAL AND PACKAGING

• CASE: Hermetically sealed glass DO-213AA (SOD80

or MLL34) MELF style package

• TERMINALS: End caps tin-lead plated solderable per

MIL-STD-750, method 2026

• POLARITY: Cathode indicated by band where diode

is to be operated with the banded end positive with respect to the opposite end for Zener regulation

• MARKING: cathode band only

• TAPE & REEL option: Standard per EIA-481-1-A with

12 mm tape, 2000 per 7 inch reel or 5000 per 13 inch reel (add “TR” suffix to part number)

• WEIGHT: 0.04 grams

• See package dimensions on last page

APPEARANCE

DO-213AA

WWW.

Microsemi

. COM

1N4614UR – 1N4627UR

1N4099UR–1N4135UR

Microsemi

Scottsdale Division

8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

Page 1

SCOTTSDALE DIVISION

(

*ELECTRICAL CHARACTERISTICS @ 25oC

MICROSEMI

INDUSTRY

PART NUMBER

(NOTE 1)

1N4614UR 1N4615UR 1N4616UR 1N4617UR 1N4618UR 1N4619UR 1N4620UR 1N4621UR 1N4622UR 1N4623UR 1N4624UR 1N4625UR 1N4626UR 1N4627UR 1N4099UR 1N4100UR 1N4101UR 1N4102UR 1N4103UR 1N4104UR 1N4105UR 1N4106UR 1N4107UR 1N4108UR 1N4109UR 1N4110UR 1N4111UR 1N4112UR 1N4113UR 1N4114UR 1N4115UR 1N4116UR 1N4117UR 1N4118UR 1N4119UR 1N4120UR 1N4121UR 1N4122UR 1N4123UR 1N4124UR 1N4125UR 1N4126UR 1N4127UR 1N4128UR 1N4129UR 1N4130UR 1N4131UR 1N4132UR 1N4133UR 1N4134UR 1N4135UR

NOTE 1: NOTE 2:

tolerance with suffix C and D respectively. V

NOTE 3:

zener impedance variation with different operating currents.

These may be ordered as either 1N4614UR-1N4627UR, 1N4099UR-1N4135UR or as the MLL4614-MLL4627, MLL4099-MLL4135.

The JEDEC type numbers shown above have a standard tolerance of +/-5% for nominal Zener voltage and are also available in 2% and 1%

The zener impedance is derived by superimposing on I

PART

NUMBER

(NOTE 1)

MLL4614 MLL4615 MLL4616 MLL4617 MLL4618 MLL4619 MLL4620 MLL4621 MLL4622 MLL4623 MLL4624 MLL4625 MLL4626 MLL4627 MLL4099 MLL4100 MLL4101 MLL4102 MLL4103 MLL4104 MLL4105 MLL4106 MLL4107 MLL4108 MLL4109 MLL4110 MLL4111 MLL4112 MLL4113 MLL4114 MLL4115 MLL4116 MLL4117 MLL4118 MLL4119 MLL4120 MLL4121 MLL4122 MLL4123 MLL4124 MLL4125 MLL4126 MLL4127 MLL4128 MLL4129 MLL4130 MLL4131 MLL4132 MLL4133 MLL4134 MLL4135

NOMINAL

ZENER

VOLTAGE

VZ @ IZT

(NOTE 2)

VOLTS

1.8

2.0

2.2

2.4

2.7

3.0

3.3

3.6

3.9

4.3

4.7

5.1

5.6

6.2

6.8

7.5

8.2

8.7

9.1 10 11 12 13 14 15 16 17 18 19 20 22 24 25 27 28 30 33 36 39 43 47 51 56 60 62 68 75 82 87 91

100

ZENER

TEST

CURRENT

250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250

1N4099UR thru 1N4135UR

(or MLL4099 thru MLL4135)

and 1N4614UR thru 1N4627UR or MLL4614 thru MLL4627)

MAXIMUM

ZENER

IZT

is measured with the diode in thermal equilibrium (still air) at 25oC for end-cap terminations.

IMPEDANCE

ZZT

(Note 3)

OHMS

1200 1250 1300 1400 1500 1600 1650 1700 1650 1600 1550 1500 1400 1200

200 200 200 200 200 200 200 200 200 200 100 100 100 100 150 150 150 150 150 150 200 200 200 200 200 250 250 300 300 400 500 700 700

800 1000 1200 1500

, a 60 Hz rms ac current equal to 10% of IZT (25µA). See MicroNote 202 for

MAXIMUM REVERSE CURRENT

IR @ V

3.5

2.5

2.0

1.0

0.5

0.4

3.5

2.5

2.0

5.0

1.0

0.5

0.5 .05 .05 .05 .05 .05 .05 .05 .05 .05 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01

Volts

1.0

1.5

2.0

3.0

4.0

5.0

5.17

5.70

6.24

6.61

6.92

7.60

8.44

9.12

9.87

10.65

11.40

12.15

12.92

13.67

14.44

15.20

16.72

18.25 1900

20.45

21.28

22.80

25.08

27.38

29.65

32.65

35.75

38.76

42.60

45.60

47.10

51.68

57.00

62.32

66.12

69.16

76.00

MAXIMUM

NOISE

DENSITY

ND @ IZT

µV/√

1 1 1 1 1 1 1 1 1 1 1 2 4

5 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40

MAXIMUM

ZENER

CURRENT

IZM

mA %/oC

120 110 100

95 90 87 85 83 80 77 75 70 65 61 56 51 46 44 42 38 35 32 29 27 25 24 22 21 20 19 17 16 15 14 14 13 12 11

9.8

8.9

8.1

7.5

6.7

6.4

6.1

5.6

5.1

4.6

4.4

4.2

3.8

TEMP.COEFF.

OF ZENER

VOLTAGE

-0.040,+0.020

-0.045,+0.030

-0.020,+0.040

-0.010,+0.050

TYPICAL

-0.075

-0.065

-0.060

-0.050

0.040

0.045

0.048

0.049

0.050

0.055

0.060

0.065

0.070

0.075

0.080

0.085

0.090

0.095

WWW.

Microsemi

. COM

1N4614UR – 1N4627UR

1N4099UR–1N4135UR

Microsemi

Scottsdale Division

8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

Page 2

+ 1 hidden pages