Micro Seiki RS-1550 Upgrade Manual

www.micro-seiki.nl
[e-mail]

RS-1550

Motorbase Plinth RS-1550 www.micro-seiki.nl page 2

Motorbase upgrade RS-1550.

General.

This upgrade is not based on an original Micro-Seiki Product. It is entirely based on the existing RS-8050 Micro Seiki made for the RY-5500
Motor unit. We named it the RS-1550.

I decided to make this upgrade because I find the standard 4 little feet on the standard RS-1500 not very handy. With this upgrade you can:

 Adjust the height of the Motor unit very easy,
 Place the Motor unit easily in a horizontal position and
 You get a more sturdy foundation.

Despite a packing-control of all parts, we strongly suggest to check if all components are present and show no damages.
Otherwise you should contact me immediately at: [e-mail]
Advice: for dry maintenance use only an abrasive cloth and for a wet maintenance use a barn free damp cloth. (use no cleaning products)

Contents of the packaging.

- 1 Operating Manual,

- 1 base plate,

- 4 screws for fixing the RS-1500 to the RS-1550.

- 4 Stainless Steel feet.
,

Photo 1

RS-1550

Motorbase Plinth RS-1550 www.micro-seiki.nl page 3

Instructions.

- Care for a free big workspace, (like a table)

- Place the motor unit upside down on the table; the motor axle must not touch the table,
(You can use two stacked piles of books. Between the two stacked piles of books you have the motor axle; Photo 2 and 3.)

- Remove the original 4 little feet,

- Place the base plate on the RS-1500,
(Place the holes in the base plate according to the screw holes place where the 4 feet were removed; Photo 2 and 3)

- By using the 4 delivered screws (red arrow Photo 2) you can fix the RS-1550 to the RS-1500. (Photo 4; red arrow)

- Place the 4 Stainless Steel feet. (Photo 5)

- DONE.

Operating.

When reinstalling the motor unit next to the Turntable, you can now easily place the motor unit horizontal by adjusting the 4 feet. This can
be done with a screwdriver and a leveling device; Photo 6 and 7.

Photo 2

Photo 3

Photo 4

Photo 5

Photo 6

Photo 7