Introduction
Micronet SP616EB 10/100M Switch provides powerful,
high-performance Ethernet switch, with all 16 ports capable of 10M
and 100M auto-negotiation operation. With its intelligent addressing
engine, it provides users with a wire-speed filtering and forwarding
of the traffic. All ports support auto-uplink detection, so users don't
have to worry about the cable type. Each port will automatically
communicate for best speed and to run in half- or full-duplex mode.
Store-and-forward switching function prevents damaged packets
and network errors from being passed on into the network.
Package Contents
Before installing the device, please verify the following items are in
the package:
y EtherFast 10/100M Switch
y Quick Installation Guide
y Power cord
1
Features
y Compliant with IEEE802.3 10Base-T, IEEE802.3u 100Base-TX
y Supports speed (10/100Mbps) and duplex mode(Half/Full) and
y Supports MDI/MDI-X auto crossover
y Supports full and half duplex operation on all ports
y Supports back-pressure (Half/Full) and flow control (IEEE 802.3x)
y Supports extensive LED indicators for network diagnostics
y Wire-speed packet filtering and forwarding rate
y Store-and-forward architecture filters fragment & CRC error
y 10” and 19” rack-mountable
and IEEE802.3x flow control
auto-detection
packets
2