Micron T2252 User Manual

Laser Distance Meter

User Manual

Contents

1.Use of the instrument…………………………… 1

2. Start-up…………………………………………. 5

3. Menu Functions………………………………… 6

4. Operation……………………………………….. 7

5. Measuring………………………………………. 8

6. Functions……………………………………….. 9

7. Appendix……………………………………….. 10

8. Technical Data………………………………….. 11

9. Measuring Conditions………………………….. 12

10.Accessories…………………………………….. 13

1

Congratulations on the purchase of this product. Carefully read
the safety instructions and the user manual before using this product. The
person responsible for the instrument must ensure that all users understand
these directions and adhere to them.

Safety Instructions

Symbols Used
The following symbols are used to distinguish precautions by the degree of
injury or damage that may result if the precaution is ignored.

Warning

Caution: Important paragraphs, which must be adhered to them.

1. Use of the instrument

a) Press to switch on the device. The laser beam emits from the

front of the meter.

b) Press again to measure the distance. The results will show on

the screen.

2

Cautions:

-Do not look straight at the laser beam

-Do not use the device in flammable and explosive environments

-Remove the batteries to avoid leakage if the device is not to be used for a
long period of time

Care

Wipe off dirt with a damp, soft cloth or a clean cloth moistened with alcohol.
Be careful with the optical components (such as optical lens): wipe with a
clean soft cloth or cotton swab moistened with distilled water (same as
cleaning glass or camera lens). Do not use aggressive cleaning agents or
solutions.

Permitted use

Measuring distances, areas and volumes

Prohibited use

-Using the instrument without instruction

-Using outside the stated limits

-Deactivation of safety systems and removal of explanatory and hazard
labels.

-Opening of the equipment by using tools (screw drivers. etc.), as far as not
specifically permitted for certain cases.

3

-Carrying out modification or conversion of the product

-Use of accessories from other manufacturers without the approval of our
company.

Limits of use

See section “Technical Data”

Responsibilities of the person in charge of the instrument

Warning:

The person responsible for the instrument must ensure that the
equipment is used correctly and is responsible for training and safety of the
equipment when in use. The person in charge of the instrument has the
following duties:

-To understand the safety instructions of the product and the instructions in
the user manual.

-To be familiar with local safety regulations relating to accident prevention

-To inform local dealer immediately if the equipment becomes unsafe.

Hazards in use

Caution：

Watch out for incorrect distance measurements. If the instrument is

defected or if it has been dropped or has been misused or modified.

Precautions:

-Carry out periodic test measurements, particularly after the instrument has