Micron MTFDJAK400MBS, MTFDJAK400MBT, MTFDJAK800MBS, MTFDJAK800MBT, MTFDJAL1T6MBS User Manual

Preliminary

S600DC Series 2.5-Inch SAS NAND Flash SSD

Features

S600DC Series 2.5-Inch SAS NAND Flash
SSD

MTFDJAK400MBS, MTFDJAK400MBT, MTFDJAK800MBS,
MTFDJAK800MBT, MTFDJAL1T6MBS, MTFDJAL1T6MBT,
MTFDJAL3T2MBS, MTFDJAL3T2MBT, MTFDJAK480MBT,
MTFDJAK960MBT, MTFDJAL1T9MBT, MTFDJAL3T8MBT,
MTFDJAL1T9MBU, MTFDJAL3T8MBU, MTFDJAK200MBW,
MTFDJAK400MBW

‡

Features

• Four endurance levels
– S655DC = 25 DWPD; S650DC = 10 DWPD
– S630DC = 2–3 DWPD; S610DC = <1 DWPD

• Micron® 16nm MLC NAND Flash

• RoHS-compliant package

• SAS
– Interface = 12 Gb/s
– Speed = 3 Gb/s, 6 Gb/s, 12 Gb/s, and auto-speed

negotiation

– SAS-3 support

• SAM-5 compliant

• Enterprise sector size support = 512, 520, 524, 528,
4096, 4160, 4192, and 4224-byte

• Hot-plug capable

• 128-entry command queue depth

• Digitally signed firmware for SED and non-SED

• FIPS140-2 level 2 certification option available on
each S650DC 2.5-inch device:
400GB, 800GB, 1600GB, and 3200GB

• Secure erase via format unit

• Reliability
– MTTF: 2.5 million device hours
– Static and dynamic wear leveling
– Uncorrectable bit error rate (UBER): 1 × 1017 bits

transferred

• Capacity 2 (unformatted): 200GB, 400GB, 480GB,
800GB, 960GB, 1600GB, 1920GB, 3200GB, 3840GB

• Endurance: TBW over warranty period
– S655DC (25 DWPD):

200GB-8PB, 400GB-17PB

– S650DC (10 DWPD):

400GB-7PB, 800GB-14PB
1600GB-29PB, 3200GB-58PB

1

4

• Endurance: TBW over warranty period
– S630DC (2–3 DWPD):

400GB-2.1PB, 480GB-2.6PB,
800GB-2.9PB, 960GB-5.2PB,
1600GB-5.8PB, 1920GB-10PB,
3200GB-12PB, 3840-21PB

– S610DC (1 DWPD):

1920GB-2.8PB, 3840GB-5.6PB

• Electrical
– Supply voltage: 5 VDC (±5%) and 12 VDC (±5%)

• Mechanical
– 2.5-inch drive: 100.5mm × 69.85mm × 7mm, and

100.5mm × 69.85mm × 15mm

• Field-upgradeable firmware

• Power consumption: 9W (TYP) and 12W (MAX)
– Configurable through information exceptions

mode page

• Operating temperature
– 0°C to +50°C (MAX)

Notes:

Warranty: Contact your Micron sales representative
for further information regarding the product, includ­ing product warranties.

1. Product achieves a mean time to failure
(MTTF) based on population statistics that
are not relevant to individual units.

2. 1GB = 1 billion bytes; formatted capacity is
less.

3. Based on ambient air temperature.

4. Total bytes written (TBW): Warranty de­fined in the product manual is five years or
device expiration as indicated by the device
life indicator, whichever comes first.

3

4

PDF: 09005aef8642dd23
s600dc_series_2_5_sas_ssd.pdf - Rev. F 3/16 EN

‡Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by

Micron without notice. Products are only warranted by Micron to meet Micron’s production data sheet specifications.

1

Micron Technology, Inc. reserves the right to change products or specifications without notice.

© 2015 Micron Technology, Inc. All rights reserved.

S600DC Series 2.5-Inch SAS NAND Flash SSD

Table 1: Performance

Notes apply to entire table

Sequential

Device

and

Capacity

128KB Transfer

Read

(MB/s)

Write

(MB/s)

(KIOPS)

S655DC

200GB 1550 600 200 120 85 115

400GB 1700 850 200 120 115 115

S650DC

400GB 1550 625 180 67 80 115

800GB 1850 850 200 80 105 115

1600GB 1900 850 200 80 120 115

3200GB 1900 800 200 80 120 115

S630DC

400GB 1400 490 180 20 45 115

480GB 1550 615 180 30 45 115

800GB 1400 710 180 20 45 115

960GB 1700 850 180 30 65 115

1600GB 1600 850 180 20 45 115

1920GB 1850 850 180 30 65 115

3200GB 1600 850 180 20 45 115

3840GB 1850 770 180 30 65 115

S610DC

1920GB 1700 850 190 12 45 115

3840GB 1600 770 190 15 45 115

Random

4KB Transfer

Read

Write

(KIOPS)

Random

4KB Transfer (70/30)

Mixed Read/Write

(KIOPS)

Latency (µs)

Preliminary

Features

Average

Notes:

1. Typical I/O performance numbers: measured using an iometer in a steady state region with a queue depth of
32 for sequential and random transfers and write cache enabled; a queue depth of 1 for READ/WRITE laten­cy values.

2. Consistent host system interface, configurations, and variables: maintained with variation only in the drive
being tested.

3. Response time measurement conditions: recorded with nominal power at 25 °C ambient temperature.

4. Page-to-page response times: derived from all possible page-to-page accesses on a sequentially precondi­tioned drive.

5. Average response time: derived from at least 5000 access measurements between programmable pages on a
randomly preconditioned drive to ensure a true statistical random average.

PDF: 09005aef8642dd23
s600dc_series_2_5_sas_ssd.pdf - Rev. F 3/16 EN

2

Micron Technology, Inc. reserves the right to change products or specifications without notice.

© 2015 Micron Technology, Inc. All rights reserved.

MT FD J AK 400 M BS - 1 AN 1 ES

Micron Technology

Product Family

FD = Flash drive

Drive Interface

J = SAS 12.0 Gb/s

Drive Form Factor

AK = 2.5-inch (7mm)
AL = 2.5-inch (15mm)

Drive Density

200 = 200GB
400 = 400GB
480 = 480GB
800 = 800GB
960 = 960GB
1T6 = 1600GB (1.6TB)
1T9 = 1920GB (1.92TB)
3T2 = 3200GB (3.2TB)
3T8 = 3840GB (3.84TB)

NAND Flash Type

M = MLC

Product Family

BS = S650DC
BT = S630DC
BU = S610DC
BW = S655DC

Production Status

Blank = Production
ES = Engineering sample

Customer Designator

YY = Standard

Hardware Feature

AB = Standard
FC = FIPS140-2 Level 2

Extended Firmware Features

Z = None
6 = SED-TCG eSSC

Sector Size

1 = 512 byte
2 = 520 byte
3 = 528 byte

NAND Flash Component

AN = L95B, 128Gb, MLC, 3.3V

BOM Revision

1 = 1st generation
2 = 2nd generation

Z AB YY

Preliminary

S600DC Series 2.5-Inch SAS NAND Flash SSD

Features

Part Numbering Information

Micron’s 600 series SAS SSD is available in different configurations and densities. Visit www.micron.com for a list
of valid part numbers.

Figure 1: Part Number Chart

PDF: 09005aef8642dd23
s600dc_series_2_5_sas_ssd.pdf - Rev. F 3/16 EN

3

Micron Technology, Inc. reserves the right to change products or specifications without notice.

© 2015 Micron Technology, Inc. All rights reserved.

Micron 16nm

eMLC NAND

Controller SoC

Phy

Mgmt

MO

offload

MO

offload

MO

offload

Interface

R5

processor

F.T.L.

R5

processor

x9

Flash ctlr PSM

Flash ctlr PSM

Flash ctlr PSM

Flash ctlr PSM

Flash ctlr PSM

Flash ctlr PSM

Flash ctlr PSM

Flash ctlr PSM

Flash ctlr PSM

Controller SoC

Phy

Mgmt

MO

offload

MO

offload

MO

offload

Interface

R5

processor

F.T.L.

R5

processor

x9

NAND bridge controller

PSM

Data path

Micron 16nm

eMLC NAND

Micron 16nm

eMLC NAND

Channel 1

Channel 2

Flash ctlr PSM

Flash ctlr PSM

Flash ctlr PSM

Flash ctlr PSM

Flash ctlr PSM

Flash ctlr PSM

Flash ctlr PSM

Flash ctlr PSM

Flash ctlr PSM

ONFI target

S600DC Series 2.5-Inch SAS NAND Flash SSD

General Description

General Description

Micron’s solid state drive (SSD) uses a single-chip controller with a dual-port SAS inter­face on the system side and 10 channels of Micron NAND Flash internally. Packaged in
an HDD replacement enclosure, the SSD integrates easily into existing storage infra­structures.

The SSD is designed to support and manage the needs of highly available, high-per­formance platforms that use significant read/write mixed workloads. Optimized to sup­port enterprise needs previously supported only by single-level cell (SLC) solutions, this
SSD provides endurance and data integrity required by growing environments.

Functional Block Diagrams

Figure 2: Functional Block Diagram – 7mm Variant (Controller Attached to NAND Directly)

Preliminary

Figure 3: Functional Block Diagram – 15mm Variant (Controller Attached to NAND by Bridge)

PDF: 09005aef8642dd23
s600dc_series_2_5_sas_ssd.pdf - Rev. F 3/16 EN

4

Micron Technology, Inc. reserves the right to change products or specifications without notice.

© 2015 Micron Technology, Inc. All rights reserved.

S600DC Series 2.5-Inch SAS NAND Flash SSD

Logical Block Address Configuration

Each device is set to report its logical block address (LBA) settings, which ensure suffi­cient storage per device capacity. The tables below show LBA settings according to de­vice size.

Standard OEM models are formatted to 512 bytes per block. The block size is selectable
at format time, and users with the necessary equipment can modify the data block size
to capacities different than those listed below before issuing a format command. To
provide a stable target capacity environment while also providing users with flexibility,
Micron recommends product planning.

Micron ensures that current and future product generations will meet capacity points at
certain block sizes. Planning with this in mind ensures a stable operating point with
backward and forward compatibility across product generations. The current operating
points for each device are shown below. The capacity stated is identical when the drive
is formatted with or without PI enabled.

Programmable Drive Capacity

Preliminary

Logical Block Address Configuration

Using the MODE SELECT command, users can change the drive capacity to less than its
maximum value. A value of zero in the Number of Blocks field means that the MODE
SELECT command will leave the drive capacity unchanged. A value greater than zero
and less than the maximum number of LBAs in the Number of Blocks field means that
the MODE SELECT command will change the drive capacity to the value in the Number
of Blocks field. A value greater than the maximum number of LBAs means that the
MODE SELECT command will round down to the maximum capacity.

Table 2: Standard LBA Settings – 512-Byte Sector Size

Total LBA Max LBA User Available

Device and

Capacity

S655DC

200GB 390,721,968 1749F1B0 390,721,967 1749F1AF 200,049,647,616

400GB 781,422,768 2E9390B0 781,422,767 2E9390AF 400,088,457,216

S650DC

400GB 781,422,768 2E9390B0 781,422,767 2E9390AF 400,088,457,216

800GB 1,562,824,368 5D26CEB0 1,562,824,367 5D26CEAF 800,166,076,416

1600GB 3,125,627,568 BA4D4AB0 3,125,627,567 BA4D4AAF 1,600,321,314,816

3200GB 6,251,233,968 1749A42B0 6,251,233,967 1749A42AF 3,200,631,791,616

S630DC

400GB 781,422,768 2E9390B0 781,422,767 2E9390AF 400,088,457,216

480GB 937,703,088 37E436B0 937,703,087 37E436AF 480,103,981,056

800GB 1,562,824,368 5D26CEB0 1,562,824,367 5D26CEAF 800,166,076,416

960GB 1,875,385,008 6FC81AB0 1,875,385,007 6FC81AAF 960,197,124,096

1600GB 3,125,627,568 BA4D4AB0 3,125,627,567 BA4D4AAF 1,600,321,314,816

1920GB 3,750,748,848 DF8FE2B0 3,750,748,847 DF8FE2AF 1,920,383,410,176

3200GB 6,251,233,968 1749A42B0 6,251,233,967 1749A42AF 3,200,631,791,616

Bytes

(Unformatted)Decimal Hexidecimal Decimal Hexidecimal

PDF: 09005aef8642dd23
s600dc_series_2_5_sas_ssd.pdf - Rev. F 3/16 EN

5

Micron Technology, Inc. reserves the right to change products or specifications without notice.

© 2015 Micron Technology, Inc. All rights reserved.

S600DC Series 2.5-Inch SAS NAND Flash SSD

Logical Block Address Configuration

Table 2: Standard LBA Settings – 512-Byte Sector Size (Continued)

Total LBA Max LBA User Available

Device and

Capacity

3840GB 7,501,476,528 1BF1F72B0 7,501,476,527 1BF1F72AF 3,840,755,982,336

S610DC

1920GB 3,750,748,848 DF8FE2B0 3,750,748,847 DF8FE2AF 1,920,383,410,176

3840GB 7,501,476,528 1BF1F72B0 7,501,476,527 1BF1F72AF 3,840,755,982,336

Table 3: Standard LBA Settings – 520-Byte Sector Size

Total LBA Max LBA User Available

Device and

Capacity

S655DC

200GB 382,435,904 16CB8240 382,435,903 16CB823F 198,866,670,080

400GB 764,871,800 2D970478 764,871,799 2D970477 397,733,336,000

S650DC

400GB 764,871,800 2D970478 764,871,799 2D970477 397,733,336,000

800GB 1,529,743,600 5B2E08F0 1,529,743,599 5B2E08EF 795,466,672,000

1600GB 3,059,487,192 B65C11D8 3,059,487,191 B65C11D7 1,590,933,339,840

3200GB 6,118,974,384 16CB823B0 6,118,974,383 16CB823AF 3,181,866,679,680

S630DC

400GB 764,871,800 2D970478 764,871,799 2D970477 397,733,336,000

480GB 917,846,160 36B53890 917,846,159 36B5388F 477,280,003,200

800GB 1,529,743,600 5B2E08F0 1,529,743,599 5B2E08EF 795,466,672,000

960GB 1,835,692,320 6D6A7120 1,835,692,319 6D6A711F 954,560,006,400

1600GB 3,059,487,192 B65C11D8 3,059,487,191 B65C11D7 1,590,933,339,840

1920GB 3,671,384,640 DAD4E240 3,671,384,639 DAD4E23F 1,909,120,012,800

3200GB 6,118,974,384 16CB823B0 6,118,974,383 16CB823AF 3,181,866,679,680

3840GB 7,342,769,280 1B5A9C480 7,342,769,279 1B5A9C47F 3,818,240,025,600

S610DC

1920GB 3,671,384,640 DAD4E240 3,671,384,639 DAD4E23F 1,909,120,012,800

3840GB 7,342,769,280 1B5A9C480 7,342,769,279 1B5A9C47F 3,818,240,025,600

Bytes

(Unformatted)Decimal Hexidecimal Decimal Hexidecimal

Bytes

(Unformatted)Decimal Hexidecimal Decimal Hexidecimal

Preliminary

PDF: 09005aef8642dd23
s600dc_series_2_5_sas_ssd.pdf - Rev. F 3/16 EN

6

Micron Technology, Inc. reserves the right to change products or specifications without notice.

© 2015 Micron Technology, Inc. All rights reserved.

S600DC Series 2.5-Inch SAS NAND Flash SSD

Logical Block Address Configuration

Table 4: Standard LBA Settings – 524-Byte Sector Size

Total LBA Max LBA User Available

Device and

Capacity

S655DC

200GB 377,338,536 167DBAA8 377,338,535 167DBAA7 197,725,392,864

400GB 754,677,072 2CFB7550 754,677,071 2CFB754F 395,450,785,728

S650DC

400GB 754,677,072 2CFB7550 754,677,071 2CFB754F 395,450,785,728

800GB 1,509,354,136 59F6EA98 1,509,354,135 59F6EA97 790,901,567,264

1600GB 3,018,708,272 B3EDD530 3,018,708,271 B3EDD52F 1,581,803,134,528

3200GB 6,037,416,536 167DBAA58 6,037,416,535 167DBAA57 3,163,606,264,864

S630DC

400GB 754,677,072 2CFB7550 754,677,071 2CFB754F 395,450,785,728

480GB 905,612,480 35FA8CC0 905,612,479 35FA8CBF 474,540,939,520

800GB 1,509,354,136 59F6EA98 1,509,354,135 59F6EA97 790,901,567,264

960GB 1,811,224,960 6BF51980 1,811,224,959 6BF5197F 949,081,879,040

1600GB 3,018,708,272 B3EDD530 3,018,708,271 B3EDD52F 1,581,803,134,528

1920GB 3,622,449,920 D7EA3300 3,622,449,919 D7EA32FF 1,898,163,758,080

3200GB 6,037,416,536 167DBAA58 6,037,416,535 167DBAA57 3,163,606,264,864

3840GB 7,244,899,840 1AFD46600 7,244,899,839 1AFD465FF 3,796,327,516,160

S610DC

1920GB 3,622,449,920 D7EA3300 3,622,449,919 D7EA32FF 1,898,163,758,080

3840GB 7,244,899,840 1AFD46600 7,244,899,839 1AFD465FF 3,796,327,516,160

Bytes

(Unformatted)Decimal Hexidecimal Decimal Hexidecimal

Preliminary

Table 5: Standard LBA Settings – 528-Byte Sector Size

Total LBA Max LBA User Available

Device and

Capacity

S655DC

200GB 371,916,520 162AFEE8 371,916,519 162AFEE7 196,371,922,560

400GB 743,833,040 2C55FDD0 743,833,039 2C55FDCF 392,743,845,120

S650DC

400GB 743,833,040 2C55FDD0 743,833,039 2C55FDCF 392,743,845,120

800GB 1,487,666,080 58ABFBA0 1,487,666,079 58ABFB9F 785,487,690,240

1600GB 3,719,165,192 DDADF508 3,719,165,191 DDADF507 1,963,719,221,376

3200GB 5,950,664,304 162AFEE70 5,950,664,303 162AFEE6F 3,141,950,752,512

S630DC

400GB 743,833,040 2C55FDD0 743,833,039 2C55FDCF 392,743,845,120

PDF: 09005aef8642dd23
s600dc_series_2_5_sas_ssd.pdf - Rev. F 3/16 EN

7

Micron Technology, Inc. reserves the right to change products or specifications without notice.

© 2015 Micron Technology, Inc. All rights reserved.

Bytes

(Unformatted)Decimal Hexidecimal Decimal Hexidecimal

S600DC Series 2.5-Inch SAS NAND Flash SSD

Logical Block Address Configuration

Table 5: Standard LBA Settings – 528-Byte Sector Size (Continued)

Total LBA Max LBA User Available

Device and

Capacity

480GB 892,599,648 3533FD60 892,599,647 3533FD5F 471,292,614,144

800GB 1,487,666,080 58ABFBA0 1,487,666,079 58ABFB9F 785,487,690,240

960GB 1,785,199,296 6A67FAC0 1,785,199,295 6A67FABF 942,585,228,288

1600GB 3,719,165,192 DDADF508 3,719,165,191 DDADF507 1,963,719,221,376

1920GB 3,570,398,592 D4CFF580 3,570,398,591 D4CFF57F 1,885,170,456,576

3200GB 5,950,664,304 162AFEE70 5,950,664,303 162AFEE6F 3,141,950,752,512

3840GB 7,140,797,184 1A99FEB00 7,140,797,183 1A99FEAFF 3,770,340,913,152

S610DC

1920GB 3,570,398,592 D4CFF580 3,570,398,591 D4CFF57F 1,885,170,456,576

3840GB 7,140,797,184 1A99FEB00 7,140,797,183 1A99FEAFF 3,770,340,913,152

Bytes

(Unformatted)Decimal Hexidecimal Decimal Hexidecimal

Preliminary

Table 6: Standard LBA Settings – 4096-Byte Sector Size

Total LBA Max LBA User Available

Device and

Capacity

S655DC

200GB 48,840,246 2E93E36 48,840,245 2E93E35 200,049,647,616

400GB 97,677,846 5D27216 97,677,845 5D27215 400,088,457,216

S650DC

400GB 97,677,846 5D27216 97,677,845 5D27215 400,088,457,216

800GB 195,353,046 BA4D9D6 195,353,045 BA4D9D5 800,166,076,416

1600GB 390,703,446 1749A956 390,703,445 1749A955 1,600,321,314,816

3200GB 781,404,246 2E934856 781,404,245 2E934855 3,200,631,791,616

S630DC

400GB 97,677,846 5D27216 97,677,845 5D27215 400,088,457,216

480GB 117,212,886 6FC86D6 117,212,885 6FC86D5 480,103,981,056

800GB 195,353,046 BA4D9D6 195,353,045 BA4D9D5 800,166,076,416

960GB 234,423,126 DF90356 234,423,125 DF90355 960,197,124,096

1600GB 390,703,446 1749A956 390,703,445 1749A955 1,600,321,314,816

1920GB 468,843,606 1BF1FC56 468,843,605 1BF1FC55 1,920,383,410,176

3200GB 781,404,246 2E934856 781,404,245 2E934855 3,200,631,791,616

3840GB 937,684,566 37E3EE56 937,684,565 37E3EE55 3,840,755,982,336

S610DC

1920GB 468,843,606 1BF1FC56 468,843,605 1BF1FC55 1,920,383,410,176

3840GB 937,684,566 37E3EE56 937,684,565 37E3EE55 3,840,755,982,336

Bytes

(Unformatted)Decimal Hexidecimal Decimal Hexidecimal

PDF: 09005aef8642dd23
s600dc_series_2_5_sas_ssd.pdf - Rev. F 3/16 EN

8

Micron Technology, Inc. reserves the right to change products or specifications without notice.

© 2015 Micron Technology, Inc. All rights reserved.

S600DC Series 2.5-Inch SAS NAND Flash SSD

Logical Block Address Configuration

Table 7: Standard LBA Settings – 4160-Byte Sector Size

Total LBA Max LBA User Available

Device and

Capacity

S655DC

200GB 47,884,616 2DAA948 47,884,615 2DAA947 199,200,002,560

400GB 95,769,232 5B55290 95,769,231 5B5528F 398,400,005,120

S650DC

400GB 95,769,232 5B55290 95,769,231 5B5528F 398,400,005,120

800GB 191,538,464 B6AA520 191,538,463 B6AA51F 796,800,010,240

1600GB 383,076,928 16D54A40 383,076,927 16D54A3F 1,593,600,020,480

3200GB 766,153,848 2DAA9478 766,153,847 2DAA9477 3,187,200,007,680

S630DC

400GB 95,769,232 5B55290 95,769,231 5B5528F 398,400,005,120

480GB 114,923,080 6D99648 114,923,079 6D99647 478,080,012,800

800GB 191,538,464 B6AA520 191,538,463 B6AA51F 796,800,010,240

960GB 229,846,160 DB32C90 229,846,159 DB32C8F 956,160,025,600

1600GB 383,076,928 16D54A40 383,076,927 16D54A3F 1,593,600,020,480

1920GB 459,692,312 1B665918 459,692,311 1B665917 1,912,320,017,920

3200GB 766,153,848 2DAA9478 766,153,847 2DAA9477 3,187,200,007,680

3840GB 919,384,616 36CCB228 919,384,615 36CCB227 3,824,640,002,560

S610DC

1920GB 459,692,312 1B665918 459,692,311 1B665917 1,912,320,017,920

3840GB 919,384,616 36CCB228 919,384,615 36CCB227 3,824,640,002,560

Bytes

(Unformatted)Decimal Hexidecimal Decimal Hexidecimal

Preliminary

Table 8: Standard LBA Settings – 4192-Byte Sector Size

Total LBA Max LBA User Available

Device and

Capacity

S655DC

200GB 47,280,536 2D17198 47,280,535 2D17197 198,200,006,912

400GB 94,561,072 5A2E330 94,561,071 5A2E32F 396,400,013,824

S650DC

400GB 94,561,072 5A2E330 94,561,071 5A2E32F 396,400,013,824

800GB 189,122,144 B45C660 189,122,143 B45C65F 792,800,027,648

1600GB 378,244,280 168B8CB8 378,244,279 168B8CB7 1,585,600,021,760

3200GB 756,488,552 2D171968 756,488,551 2D171967 3,171,200,009,984

S630DC

400GB 94,561,072 5A2E330 94,561,071 5A2E32F 396,400,013,824

480GB 113,473,288 6C37708 113,473,287 6C37707 475,680,023,296

PDF: 09005aef8642dd23
s600dc_series_2_5_sas_ssd.pdf - Rev. F 3/16 EN

9

Micron Technology, Inc. reserves the right to change products or specifications without notice.

© 2015 Micron Technology, Inc. All rights reserved.

Bytes

(Unformatted)Decimal Hexidecimal Decimal Hexidecimal

S600DC Series 2.5-Inch SAS NAND Flash SSD

Logical Block Address Configuration

Table 8: Standard LBA Settings – 4192-Byte Sector Size (Continued)

Total LBA Max LBA User Available

Device and

Capacity

800GB 189,122,144 B45C660 189,122,143 B45C65F 792,800,027,648

960GB 226,946,568 D86EE08 226,946,567 D86EE07 951,360,013,056

1600GB 378,244,280 168B8CB8 378,244,279 168B8CB7 1,585,600,021,760

1920GB 453,893,136 1B0DDC10 453,893,135 1B0DDC0F 1,902,720,026,112

3200GB 756,488,552 2D171968 756,488,551 2D171967 3,171,200,009,984

3840GB 907,786,264 361BB818 907,786,263 361BB817 3,805,440,018,688

S610DC

1920GB 453,893,136 1B0DDC10 453,893,135 1B0DDC0F 1,902,720,026,112

3840GB 907,786,264 361BB818 907,786,263 361BB817 3,805,440,018,688

Bytes

(Unformatted)Decimal Hexidecimal Decimal Hexidecimal

Preliminary

Table 9: Standard LBA Settings – 4224-Byte Sector Size

Total LBA Max LBA User Available

Device and

Capacity

S655DC

200GB 46,922,352 2CBFA70 46,922,351 2CBFA6F 198,200,014,848

400GB 93,844,704 597F4E0 93,844,703 597F4DF 396,400,029,696

S650DC

400GB 93,844,704 597F4E0 93,844,703 597F4DF 396,400,029,696

800GB 187,689,400 B2FE9B8 187,689,399 B2FE9B7 792,800,025,600

1600GB 375,378,792 165FD368 375,378,791 165FD367 1,585,600,017,408

3200GB 750,757,576 2CBFA6C8 750,757,575 2CBFA6C7 3,171,200,001,024

S630DC

400GB 93,844,704 597F4E0 93,844,703 597F4DF 396,400,029,696

480GB 112,613,640 6B65908 112,613,639 6B65907 475,680,015,360

800GB 187,689,400 B2FE9B8 187,689,399 B2FE9B7 792,800,025,600

960GB 225,227,280 D6CB210 225,227,279 D6CB20F 951,360,030,720

1600GB 750,757,576 2CBFA6C8 750,757,575 2CBFA6C7 3,171,200,001,024

1920GB 450,454,552 1AD96418 450,454,551 1AD96417 1,902,720,027,648

3200GB 757,725,329 2D29F891 757,725,328 2D29F890 3,200,631,791,616

3840GB 900,909,096 35B2C828 900,909,095 35B2C827 3,805,440,021,504

S610DC

1920GB 450,454,552 1AD96418 450,454,551 1AD96417 1,902,720,027,648

3840GB 900,909,096 35B2C828 900,909,095 35B2C827 3,805,440,021,504

Bytes

(Unformatted)Decimal Hexidecimal Decimal Hexidecimal

PDF: 09005aef8642dd23
s600dc_series_2_5_sas_ssd.pdf - Rev. F 3/16 EN

10

Micron Technology, Inc. reserves the right to change products or specifications without notice.

© 2015 Micron Technology, Inc. All rights reserved.

Physical Configuration

Power segment

Primary signal segment

Secondary signal segment

P1

S8

S1

Dimensions and Weight

Preliminary

S600DC Series 2.5-Inch SAS NAND Flash SSD

Physical Configuration

Form

factor Capacity (GB)

2.5-inch 200/400/480/800/960 7.00 +0.20/–0.50 69.85 ±0.25 100.24 ±0.21 TBD

1600/1920/3200/3840 15.00 +0.00/–0.50

Height

(mm)

Width

(mm)

Length

(mm)

Dual Port Support

Micron's 600 Series SAS SSD drives have two independent ports, which can be connec­ted in the same or different SCSI domains. Each drive port has a unique SAS address.

The two ports are capable of independent port clocking. For example, both ports can
run at 12 Gb/s, or the first port can run at 12 Gb/s while the second runs at 6 Gb/s. Sup­ported link rates are 3.0, 6.0, or 12.0 Gb/s.

Subject to buffer availability, SSD drives support the following:

• Concurrent port transfers: Supports receiving COMMAND and TASK management
transfers on both ports simultaneously

• Full duplex transfers: Supports sending XFER_RDY, DATA, and RESPONSE transfers
while receiving frames on both ports

Interface Connectors

The SAS signal segment interface cable has four transmission conductors and three
ground conductors for each channel. As shown in the figure below, the cable includes
two 7-pin signal segments (primary and secondary) and a 15-pin power segment ar­ranged in a single row with a 1.27mm (0.050 inch) pitch.

Weight

(grams)

Figure 4: SSD Interface Connections

PDF: 09005aef8642dd23
s600dc_series_2_5_sas_ssd.pdf - Rev. F 3/16 EN

SAS drives use the device connector for the following:

• DC power

• SAS interface (dual port)

• Activity LED (DAS)

Micron Technology, Inc. reserves the right to change products or specifications without notice.

11

© 2015 Micron Technology, Inc. All rights reserved.

S600DC Series 2.5-Inch SAS NAND Flash SSD

Pin Assignments

Table 10: Primary SAS Signal Segment Pin Assignments

Signal Name Type Description

S1 GND Second mate to ground

S2 RX0+ Positive (RX0 from target); short pin to support hot plugging

S3 RX0– Negative (RX0 from target); short pin to support hot plugging

S4 GND Second mate to ground

S5 TX0– Negative (TX0 to target); short pin to support hot plugging

S6 TX0+ Positive (TX0 to target); short pin to support hot plugging

S7 GND Second mate to ground

Table 11: Secondary SAS Signal Segment Pin Assignments – Back Side

Signal Name Type Description

S8 GND Second mate to ground

S9 RX1+ Positive (RX1 from target); short pin to support hot plugging

S10 RX1– Negative (RX1 from target); short pin to support hot plugging

S11 GND Second mate to ground

S12 TX1– Negative (TX1 to target); short pin to support hot plugging

S13 TX1+ Positive (TX1 to target); short pin to support hot plugging

S14 GND Second mate to ground

Preliminary

Physical Configuration

PDF: 09005aef8642dd23
s600dc_series_2_5_sas_ssd.pdf - Rev. F 3/16 EN

12

Micron Technology, Inc. reserves the right to change products or specifications without notice.

© 2015 Micron Technology, Inc. All rights reserved.