Micron MTFDDAK256TDL-1AW12ABYY, MTFDDAK512TDL-1AW12ABYY, MTFDDAK1T0TDL-1AW12ABYY, MTFDDAK2T0TDL-1AW12ABYY, MTFDDAV256TDL-1AW12ABYY User Manual
...
Micron® 1300 SATA TLC SSD
SATA
M.2
2.5”
Cost-Effective Flash for Client Computing
As spinning media for client computers is winding down, the demand for
solid performing SATA client solid state drives (SSDs) continues strong.
The Micron® 1300 SATA client SSD is an expansion of our SATA portfolio,
the broadest in the industry. From mainstream desktops to corporate roadwarrior tablets, the 1300 SSD provides exceptional price-to-performance
ratios and extremely low power consumption for client computing. It’s an
economical flash option in the changeover from legacy hard drives.
Based on the successful Micron 1100 SSD, the Micron 1300 SATA SSD is
built with advanced features, such as device sleep (DEVSLP) low-power
modes to further extend battery life. To protect your valuable data, multiple
features do the job: asynchronous power-loss protection for data at rest,
adaptive thermal monitoring and optional Opal 2.0 self-encryption.
Using revolutionary 3D NAND technology, Micron’s state of
the art process – CMOS under the array (CUA) – allows for
reduced cost and increased density in a 96-layer, vertically
tiered compact die. This advancement keeps the price
competitive and allows the Micron 1300 to be offered in 1TB
M.2 and 2TB 2.5” capacities.
Which Applications Are the Best Fit?
MEDIA
ENTERTAINMENT
GOVERNMENT
RETAIL/POS
HIGHER EDUCATION
Key Benefits
Better NAND Means Better Products
Reliability you can get only from a trusted NAND
manufacturer. The 1300 SSD features triple-layer cell (TLC)
technology, for more data storage in the same footprint. More
cost control comes from the state-of-the-art stackable 96-Tier
3D NAND die that allows for up to 2TB in a 2.5” and 1TB in a
M.2 form factor.
Get Solid SATA Performance
Many organizations are still looking for strong SATA
performance. As a follow-on to our well-accepted Micron
1100 SSD client drive, the 1300 draws on the same trusted
platform architecture, proven controller and firmware.
Go Mobile for Longer
Class-leading power efficiency satisfies customers’ ever-
increasing expectations for longer battery life. Consuming
less than 5mW in low power mode, the Micron 1300 uses
significantly less power than that required by hard disk drives
(HDDs). Over 20X less than HDDs in active mode. That’s
more employee uptime!
Micron® 1300 SATA TLC SSD
SATA
M.2
2.5”
More Key Benefits
Keep It Cool
Increase reliability in space-constrained designs with our adaptive
thermal monitoring feature that limits heat generated by the SSD with
the small footprint M.2 form factor.
Depend on Our Endurance
The optimization of 3D TLC NAND component and Micron SSD
architecture enables the 1300 SSD to deliver strong performance and
solid endurance without compromise.
Speed Time to Market
As the 1300 SSD is highly leveraged from the Micron 1100 SSD,
qualification processes for our OEM customers are reduced, saving
time and money.
Protect Your Data
Optional Opal self-encryption drive (SED) technology offers rock-solid
encryption for data-at-rest for your valued mobile data without
performance degradation. All encryption/decryption utilizes a XTSAES-256-bit hardware engine that complies with the TCG™ Opal 2.0
standards, the IEEE 1667 protocol and Microsoft® eDrive, without
impacting performance.
Sanitize and Reuse
In just a few seconds, the SANITIZE CRYPTO SCRAMBLE command
allows the end-user to erase, repurpose, and retire the SSD with a
click of a button, ensuring no residual data is left behind to be
compromised.
Make It Easier to Manage
With our downloadable Storage Executive tool, Micron client drives
have built-in troubleshooting, diagnostics and health check intelligence
for hassle-free manageability.
Micron 1300 SSD 2.5-inch and Micron 1300 SSD M.2
Key Specifications
1300 SSD – OEM, SI, VAR
Category
Corporate and Consumer PCs and
Notebooks
Model
Micron 1300 SATA TLC SSD
Interface
SATA 6 Gb/s
Capacities1
256GB
512GB
1TB
2TB
Seq Read (MB/s)2
530
530
530
530
Seq Write (MB/s)2
520
520
520
520
Random Read
(kIOPS)3
58
90
90
90
Random Write
(kIOPS)3
87
87
87
87
Endurance (TBW)
180
300
400
400
MTTF (Million
Hours)
1.5
DEVSLP (mW)
5 5 5
10
Advanced Features4
Power-loss protection (data at rest)
Adaptive thermal monitoring
Optional TCG Opal encryption
Garbage collection, S.M.A.R.T.
Base Part Numbers
Standard Part SED
Capacity
Form
Factor
MTFDDAK256TDL-1AW12ABYY
256GB
2.5"
MTFDDAK512TDL-1AW12ABYY
512GB
2.5"
MTFDDAK1T0TDL-1AW12ABYY
1TB/1024GB
2.5"
MTFDDAK2T0TDL-1AW12ABYY
2TB/2048GB
2.5"
MTFDDAV256TDL-1AW12ABYY
256GB
M.2
MTFDDAV512TDL-1AW12ABYY
512GB
M.2
MTFDDAV1T0TDL-1AW12ABYY
1TB/1024GB
M.2 Standard Part Non-SED
Capacity
Form
Factor
MTFDDAK256TDL-1AW1ZABYY
256GB
2.5"
MTFDDAK512TDL-1AW1ZABYY
512GB
2.5"
MTFDDAK1T0TDL-1AW1ZABYY
1TB/1024GB
2.5"
MTFDDAK2T0TDL-1AW1ZABYY
2TB/2048GB
2.5"
MTFDDAV256TDL-1AW1ZABYY
256GB
M.2
MTFDDAV512TDL-1AW1ZABYY
512GB
M.2
MTFDDAV1T0TDL-1AW1ZABYY
1TB/1024GB
M.2
1. Capacities: Unformatted. 1GB = 1 billion bytes. Formatted capacity is less.
2. Sequential Read/Write: 128KB transfer size, fresh-out-of-box (FOB).
3. Random Read/Write: 4KB transfer size, fresh-out-of-box (FOB).
4. Advanced Features: No hardware, software or system can provide absolute security
under all conditions. Micron assumes no liability for lost, stolen or corrupted data arising
from the use of any Micron products, including those products that incorporate any of the
mentioned security features
micron.com/1300
©2019 Micron Technology, Inc. All rights reserved. Micron and the Micron logo are trademarks of Micron Technology, Inc.
All other trademarks are the property of their respective owners. Products are warranted only to meet Micron’s production
data sheet specifications. Products, and specifications are subject to change without notice. Dates are estimates only.
Rev. B 01/19 CCM004-676576390-11064
Loading...