Micron MT9T031 User Manual

MT9T031
Streamlined Designs
3-Megapixel 1/3-Inch Image Sensor 48-Pin PLCC or Die
for Wide FOV and Electronic Pan/Tilt/Zoom Cameras
High Resolution, High Speed,
1
and High Performance
Capture single frames and continuous video at high rates and with crystal-clear detail.
2
This sensor provides a wide FOV that can be subwindowed, positioned, and sized to enable a low-cost, highly reliable pan/tilt/zoom camera.
Unparalleled Image Quality
3
Deliver brilliant, high-resolution color images, rivaling CCD image quality.
4
Mainstream Form Factor
The 1/3-inch optical format fits mainstream surveillance applications and lenses.
Ease of Design
5
With on-chip, 10-bit ADC, this one-chip solution enables a small footprint and easy design.
Applications
• High-resolution security cameras
• Electronic pan/tilt/zoom cameras
• Power-over-Ethernet cameras
• Wide field of view cameras
How to Buy
Production and sample quantities of Aptina
products may be ordered through qualified distributors. See our Web site for details. You may also request access to NDA data sheets and other technical documentation by visiting our Web site.
MT9T031
Pixel Array
2,752H x 2,004V
SCLK SDATA SADDR
PIXCLK DOUT[11:0] LINE_VALID FRAME_VALID STROBE
Serial
Interface
Analog Signal Chain Data Path
TRIGGER
EXTCLK
RESET#
STANDBY#
OE#
Array Control
Output
Features
• DigitalClarity® imaging technology
• 3-megapixel resolution (2048H x 1536V)
• 1/3-inch optical format
• 3.2μm x 3.2μm pixel size
• Low-power image sensor
• Global pixel reset
• Row and column pixel binning
• Programmable gain and exposure
• Automatic black level calibration
• Viewfinder and snapshot modes
• On-chip, 10-bit analog-to-digital converter (ADC)
Specifications
Imaging Array
• Optical Format: 1/3-inch
• Active Array: 2048(H) x 1536(V)
• Imaging Area: 6.55mm(H) x 4.92mm(V) (8.19mm diagonal)
Speed/Output
• Frame Rate: 12 fps (QXGA), 20 fps (UXGA) 27 fps (SXGA), 43 fps (XGA) 93 fps (VGA), with programmable blanking
• Data Rate: 48 Mp/s
• Master Clock: 48 MHz
• Data Format: 10-bit parallel
Sensitivity
• Pixel Size: 3.2μm x 3.2μm
• Dynamic Range: >61dB
• Responsivity: >1.0 V/lux-sec (550nm)
Power
• Supply: 3.3V nominal (3.0V to 3.6V)
• Consumption: 244mW (nominal)
1.65μW (standby)
Temperature Range
• Operating: 0°C to +60°C Package: 48-pin PLCC or die
Block Diagram
aptina.com
Products are warranted only to meet Aptina’s production data sheet specifications. Produc ts and specifications are subject to change without notice. Aptina, the Aptina logo, and DigitalClarit y are the property of Micron Technology, Inc. All other trademarks are the property of their respec­tive owners. ©2008 Micron Technology, Inc. All rights reserved. 02/22/08 EN.L
Loading...