Micromega M One M150 ROOM EQ, M One M100 ROOM EQ User Manual
ROOM EQ
user’s manual
2
The electro-acoustic correction system M.A.R.S. corrects any faults in your audio system by taking measurements from a microphone placed at the
listening point.
This correction system takes into account your whole system: “speakers - room.” It irons out any incidents in the amplitude/frequency response coming from re ections, absorptions or resonances in the listening room. It also corrects imperfections in the speakers.
The sound is transformed, any unpleasant resonance and other acoustic problems caused by your stereo are eliminated. The sound has pinpoint
accuracy and the base register has more impact. You can be sure you are getting the best out of your system whilst still preserving the necessary
neutrality of true hi-fidelity.
M-One 100/150
MicrophoneMicrophone cable
Left speaker Right speaker
What you need :
USB key with licence
(only for M-100)
3
TABLE DES MATIÈRES
1 - INSTALL M.A.R.S. LICENCE FOR M-100 ................................. 4
2 - MICROPHONE SETUP ..................................................................... 5
3 - SETUP IN CENTRAL POSITION .................................................. 6
4 - MEASUREMENT IN CENTRAL POSITION ............................. 7
5 - SETUP AND MEASUREMENT IN LEFT POSITION ............ 9
6 - SETUP AND MEASUREMENT IN RIGHT POSITION ........ 10
7 - AFTER CALIBRATION ...................................................................... 11
8 - CALIBRATION SETTING ................................................................. 12
9 - DESACTIVATE ROOM EQ ............................................................... 13
4
1. INSTALL M.A.R.S. LICENCE FOR M-100
M-150 amplifier already have a factory licence installed, you can go
directly to point 2 of this document.
For M-100 amplifier, you must have the M.A.R.S. kit that has an USB key with a licence that will enable
the M.A.R.S. function (Room EQ and Binaural). You must install the latest system update for M-100
(download here : http://www.micromega.com).
Licence installation :
• M-One must be unplugged from main
• The USB key that contain the licence must be plugged in USB port 1 (bottom)
• Plug M-One on main and wait for complete installation (see M-One screen)
• When installation is over, you can remove the USB key, unplug main, wait 5 secondes and plug back.
5
Please make sure to insert completely the microphone into MIC input on the M-One.
This is mandatory for the good measurement process of ROOM EQ.
2. MICROPHONE SETUP
Loading...