Micromax Q55 Bling User Manual
1
Contents
1. For your Safety ................................................ 5
2. Mobile Phone Profile ....................................... 7
3. Preparation before Use .................................... 9
Installing the SIM Card ...................................................................... 9
Installing the Memory card
............................................................. 10
Installing the Battery
....................................................................... 11
Charging the Battery
....................................................................... 11
Notices on using the battery
............................................................ 12
PIN code
.......................................................................................... 13
4. General Instructions ...................................... 14
Dial key ............................................................................................ 14
Switch-on/off key /End key
.............................................................. 14
Standard keypad
............................................................................. 15
AM/FM function key
........................................................................ 15
Keypad lock
..................................................................................... 15
Icons in Standby State
..................................................................... 16
2
Language and Input Mode .............................................................. 16
Callers’ group
.................................................................................. 17
5. Terms Description ......................................... 17
Dial domestic calls ........................................................................... 17
Dial international calls
..................................................................... 17
Emergency calls
............................................................................... 18
6. Basic operation .............................................. 18
Switch on ......................................................................................... 18
Switch off
......................................................................................... 19
Dial a Call
........................................................................................ 19
Adjust Receiver Volume
................................................................... 20
Answer a Call
................................................................................... 20
Send DTMF Signal
............................................................................ 20
Dial Hold
.......................................................................................... 20
Fast Read SMS
................................................................................. 21
Missed Calls
..................................................................................... 21
Connect to Voice mail
...................................................................... 21
7. Use of Menu Functions .................................. 22
7.1 Multimedia ............................................................ 22
3
7.2 Phonebook ............................................................ 31
7.3 Call History
............................................................ 32
7.4 Connectivity
.......................................................... 34
7.5 Chatting
................................................................. 36
7.6 Messaging
............................................................. 37
7.7 One-Touch-Launch Facebook
................................. 43
7.8 Opera Mini
............................................................ 43
7.9 Organizer
............................................................... 43
7.10 Applications
......................................................... 45
7.11 Twitter
................................................................. 48
7.12 Settings
................................................................ 48
8. Editor Operation ............................................ 58
Basic letter input ............................................................................. 58
Number input
.................................................................................. 58
Symbol input
.................................................................................... 59
9. Use of USB .................................................... 59
10. Maintenance & Safety ................................. 59
After sales service ............................................................................ 59
4
Charger and Adapter Safety ............................................................ 60
Battery Information and Care
.......................................................... 60
General Notice
................................................................................. 60
Troubleshooting
.............................................................................. 61
11. Abbreviations & Definitions ......................... 64
5
1. For your Safety
For your safety and proper use of the mobile phone, please
read the following guidelines carefully:
Do not switch the mobile phone on when close to a
chemical factory, gas station or other explosive objects.
During driving, please use headset for safety purpose;
unless otherwise in emergency, always stop the car on
roadside to have a call conversation.
Because the use of the mobile phone can cause
interference in the aircraft, never use the mobile phone in
aircraft. The use of the mobile phone is dangerous and
illegal; do switch off the mobile phone before boarding.
Pay special attention to the use of the mobile phone near
heart pacemaker, deaf-aid and some other medical
equipment, because the mobile phone can cause
interference with them.
None-original factory’s accessories and parts will lose
guarantee.
Do not dismantle the mobile phone without permission. In
case of failure, please contract the supplier as soon as
possible.
Do not plug the charger into the mobile phone and charge
without battery. Always power off the mobile phone when
taking out the battery; otherwise the memory of the phone
may be damaged.
When charging the mobile phone, always keep it in the
place with good ventilation, heat sink and away from
flammable and explosive objects.
In order to avoid demagnetization, always keep the mobile
6
phone away from magnetic objects such as CD, credit card
etc.
Ensure the mobile phone not to contact any liquid; once
such case occurs, remove the battery and contact the
supplier immediately.
Do not use the mobile phone in the environment at too
high or too low temperature, never expose the mobile
phone under strong sunshine or too wet environment. The
suitable temperature for the phone and accessories is 0℃
-40℃. The height to use the phone shall be less than
2,000m.
Do not use liquid or wet cloth with strong cleanser to clean
the mobile phone.
This mobile phone has shooting, videoing and audio
recording functions, which shall be used as per the related
laws and regulations.
Always keep the mobile phone out of children’s reach. Do
not throw or vibrate the mobile phone because violent
treatment to the mobile phone may damage the inner
circuits and precise structures.
Please do not discard the waste battery into general
household garbage. Please deal with the waste battery
according to provisions where they are definitely made.
Warning: Micromax will not bear any responsibility for any
incompliance with the above guidelines or improper use of the
mobile phone. Our company keeps the right to make
modifications to any of the content here in this user guide
without public announcement in advance. The content of this
manual may vary from the actual content displayed in the
7
mobile phone. In such case, the latter shall govern.
2. Mobile Phone Profile
The mobile phone has 50 keys, including single screen， one
vibration motor, one charger/ data common transmission port.
(Below is the front face of the mobile phone).
1
2
3
4
7
9
10
5
6
8
8
1. Speaker
7. QWERTY keypad
2. LCD 8. Phonebook
3. Main menu keys 9. Back key
4. Message Shortcuts 10. Facebook
5. SEND 1 key(SIM-1) 11. Speaker
6. SEND 2 key(SIM-2) 12. Camera
11
12
9
3. Preparation before Use
Installing the SIM Card
When registering mobile phone number, you can apply for two
different phone numbers, two different mobile phone network
service providers and thus obtain two SIM (Subscriber
Identification Module) cards.
With these two SIM cards, you can use all functions of your
mobile phone. The SIM cards save the parameters needed for
communications and personal data, including PIN (Personal
Identification Number) code, phonebook, short message and
other extra system services.
Warning: Do not distort or scratch the SIM card nor let it
contact static, dust or moisture. If it is lost, please contact
immediately your network operator for help.
Before SIM card installation, please switch off the mobile phone.
The SIM card is installed on the back of the mobile phone.
Follow the following diagram to install the SIM card. Please
insert the host SIM card into the SIM1 slot and the slave SIM
card into the SIM2 slot.
Note: If SIM card is inserted only into the SIM1 slot, then only
the host works; likely, If SIM card is inserted only into the SIM2
slot, then only the slave works. When two SIM cards are
inserted into the SIM1 slot and SIM2 slot respectively, you can
choose work mode freely as you wish.
Note: As the SIM card is small object, keep it out of children’s
touch or prevent children gulping it!
10
Installing the Memory card
As the mobile phone does not have enough storage space, to
use some functions, you need to install a memory card (This
mobile phone use T-FLASH card.)
Install T-FLASH card: Open the back cover to take out the
battery, release the T-Flash card lock, insert the T-Flash card into
its slot, and restore the lock and the battery before restarting
the mobile phone.
Memory Card
SIM 1
SIM 2
11
Note: As the T-FLASH card is small object, keep it out of
children’s touch or prevent children gulping it!
Installing the Battery
The mobile phone is suitable for original battery and
accessories. When the battery is idle, it is recommended to put
it into the protection box.
Follow the following diagram to install the battery.
Note: Do install the battery as per the diagram so as prevent
the battery contact patch being damaged.
Charging the Battery
The new battery cannot reach the optimal efficiency unless it
has undergone several continuous complete charges and
discharges.
When the battery is used up, charge it in time. Over-discharge
can damage the battery. After the battery is charged full, cut off
the connection of charger with the AC power supply and the
Battery
12
Earphone
connection with the mobile phone.
Follow the following diagram to connect the charger.
During charging, the battery capacity icon on the screen flickers
from the right to the left. After the battery is charged full, the
icon is full of bars. Slight heat during charging is normal.
Warning: When a travel charger and its accessories are used to
charge the battery, please firstly check if they are original or
recognized by the original manufacturer. The use of other
accessories may damage your mobile phone and cause risks!
Always use them indoor and dry places.
Notices on using the battery
The performance of the battery is affected by many factors,
including radio barrier network settings, signal strength, signal
strength, work temperature, chosen and used functions or
settings as well as phone accessories, tone, data or other
applications.
For optimal performances, please follow the rules below:
New battery or the battery having been idle for long need
charging for long. The standard voltage scope for the
battery is 3.6V-4.2V.
Charger Port /USB
13
During charging, keep the battery at room temperature or
similar temperature.
With time passing by, the battery will gradually be worn
and thus need longer time to charge. This is normal.
However, after normal charging, if call duration decreases
but charging time increases, you need to buy another
battery from the original manufacturer or authorized by the
original manufacturer. The battery of interior quality can
damage your mobile phone and cause danger!
If the phone is overused at low battery when charging,
there might need a longer time for the charge indicator to
be shown on the screen.
Note: Please dispose the battery according to the local
regulations. Try to recycle the battery as possible. Do not treat
the waste battery as common waste.
Warning: Do not throw the battery into fire so as to prevent fire.
The broken battery may cause explosion.
Warning: Charging the mobile phone by improper means can
cause to explosion. Always refer to the related regulations for
the disposal of the battery.
PIN code
PIN1 Code: It is the personal identification number used to
enter SIM and able to prevent others using SIM1 without
permission. If the mobile phone has activated the PIN1 code
protection, when the mobile phone is switched on, the screen
will display “Input PIN”. In the process of inputting PIN1 code,
the screen will use “*” to represent the input content. While
obtaining SIM, you can obtain its PIN1 code.
14
PIN2 Code: It is the personal identification number used for
some special functions such as paid call etc.
PUK Code and PUK2 Code(8-digit)
To change the locked PIN code, you need to use PUK (Personal
Unblocking Key) code. To change the locked PIN2 code, you
need to use PUK2 code. If these two codes are not provided
together with the SIM cards, ask the local service provider for
them.
Warning: If the PIN code is input wrongly for successively three
times, the SIM card will be locked. Please contact the network
operator immediately for help. Attempt to unlock the code may
make the SIM card ineffective forever!
4. General Instructions
Dial key
It is used to dial a call (with phone number entered or in
phonebook state) or receive an incoming call. In standby state,
press this key to display the latest call register (SIM1 and SIM2
support respectively 20 call entries, including received calls,
missed calls and dialed calls). In dual-SIM standby mode, press
this key to have an option menu on which you can choose to
operate via SIM1 or via SIM2.
Switch-on/off key /End key
In call state, it is used to interrupt a call; in call conversation
state, it is used to end a call or exit from the current menu and
back to the standby state. Hold this key for 4~5s to switch
on/off the mobile phone.
15
Standard keypad
On the keypad, you can see A-Z （0-9 number keys ）number
keys, * key and # key, totally 42 keys.
Press these keys to input phone number, password, English
letters, symbols or choose menus.
In different states or different functional menus, “+” key and
“-“ key have different functions:
Press “SPEAKER” key long to start or exit from the silence
mode.
In music player state, “+” and “-” are used to adjust
volume.
AM/FM function key
OK key: In radio state, press the key to stop
In search state, press the left/right key to search channels
forward and backward, press the OK key until you find an
effective channel. For FM, you can have a tuning of 0.1MHz
downward or backward.
1-9 number keys: If they are pressed shortly, you can switch
to the corresponding channels saved in the channel list; if
they are pressed long, you can save the current frequency
to the corresponding channel.
+, - key: Adjust volume.
Keypad lock
When in standby interface, if the mobile phone is idle for
certain time, it will be locked automatically. Press the Unlock
key and “*”to release. After the mobile phone is locked, the
16
keypad cannot be activated easily; in case of incoming call,
likewise, press the answer key to receive it; after that, the
keypad will be locked automatically.
Icons in Standby State
Indicates signal strength Indicate the battery level
Alarm clock is active Keypad is locked
There is new message(s) Host line 1
There is missed call(s) Host line 2
In normal mode Slave line 1
Vibrate then ring Slave line 2
Ring MMS
Vibrate Inbox PUSH
Ring and vibrate GPRS
Call divert
Language and Input Mode
The mobile phone has defaulted abc input mode. For different
areas, there are different languages and corresponding input
modes.
Call hint
The mobile phone is inbuilt with vibration motor and buzzer
and provides several incoming call modes:
Ring
Vibration
Ring and vibration
Ring after vibration
17
Callers’ group
The callers’ group in the mobile phone includes friends, family,
VIP, colleagues and others etc. You can set different call tone
and photo for different callers’ group.
5. Terms Description
Dial domestic calls
The simplest method to dial a domestic call is to input
phone number via the number keypad, then press dial key
to dial call. To change phone number, press “del key”.
During dialing, the screen will display a cartoon. If SIM card
1 call, "SIM1-" occurs; if SIM card 2 call, "SIM2-" occurs.
When the other party is connected, the screen will display
the corresponding information.
Press end key to end the call.
To dial a domestic call, input area code + phone number
and then press the dial key.
Dial international calls
If you want to make an international call, you can press *
key continuously until the international dialing prefix “+” is
seen on the screen. This will allow you make an
international call from any country without knowing the
dialing prefix (for example, +62 represents Indonesia).
After inputting the prefix, you need to input the Country
number and complete telephone number. You can input
the Country number according to the common practice,
18
such as, 49 for Germany, 44 for British, 46 for Sweden, etc.
Dial international telephone number as following: “+”
Country number +Complete telephone number + Dial key.
Emergency calls
If your phone is under the network coverage (you can know this
by checking the signal bar at the up left corner on the screen),
you can make emergency calls. If your network supplier does
not provide roaming service in this area, Emergency will be
shown on the screen. That means you can only make this kind
of calls. If your phone is under the network coverage, you can
even make emergency calls without the SIM card.
* In some areas, 112 (emergency call) service is provided by the
network operator. In case of failure, consult the network
operator.
6. Basic operation
Switch on
Press the switch-on/off key to start the mobile phone, then the
screen will display switch-on image. Then you can enter Settings
menu to set phone modes, including SIM1 & SIM2 On, Only
SIM1 On, Only SIM2 On and Flight. The defaulted one is Only
SIM1 On.
After insert SIM card, the mobile phone will automatically check
the SIM card availability, and then it will be shown information
as following on the display by sequence:
1. “Input phone password”——If you have set the password.
2. “Input PIN” —— If you set SIM card password.
3. “No service”—Indicates fail to make register and cannot
make any calls.
19
4. “Emergency calls only”—indicates has registered to other
network and only can make call to 112.
5. “Searching”—the mobile phone is searching network until
find appropriate network;
6. “Operator name”—Indicates network successfully
registered.
Note: If you do not know PIN code, please contact the network
service provider.
The default phone password is “0000”.
Switch off
To switch off the mobile phone, press the end key. When the
screen displays switch-off cartoon, the host and the slave will
be off at the same time. Do not take out the battery to switch
off the mobile phone. If so, the SIM card can be damaged easily
and some data will be lost.
Dial a Call
With the number keypad, you can enter phone numbers (if
wrong characters are input, press the clear key to delete
them). Press the dial key to dial the phone number. In SIM1
and SIM2 On state, you can choose to dial a call via SIM1 or
SIM2. To end a call, press the end key; or to cancel a dial,
press the Cancel key or the switch-on/off key. After the call
is connected, you can see the call timer on the screen.
Dial a call via phonebook: Enter the phonebook and search
the desired name/phone number, and then press dial key
to dial call.
Redial latest dialed number: In standby state, press dial key
20
to view the list of the latest dialed 20 phone number or
names. Roll to the desired phone number or name and
press dial key to dial call.
Adjust Receiver Volume
In call conversation, press the “+”and “-” to adjust the volume
of the receiver.
Answer a Call
When there is a call, as per the settings of the mobile phone,
you will be alerted with ring, vibration, vibration and ring as
well as ring after vibration.
To receive a call, press Dial/Call Key.
To refuse a call, press Switch-on/off key or the end key directly.
If the CLI (Call Line Identity) is opened, the phone number of
the caller will occur on the screen. If this number has been
saved in the phonebook, the name corresponding to this
number will be displayed on the screen.
Send DTMF Signal
When this function is set, in call conversation, press the desired
number key and * key and # key to send DTMF signals to the
other party. If such function is inactive, then extension call will
become impossible.
Dial Hold
If you have applied for dial hold, in the call conversation process,
press “Options” to have the following function menus:
Pause: Pause the current call but with the line keeping
connected.
Loading...