Micromax Q25 User Manual
Getting Started
Understand Your Phone
SIM Card Insertion
To insert your SIM card(s):
1. Switch off the mobile phone and remove the rear cover and
battery, as illustrated in the following image:
2. Open the SIM tray and insert the SIM card(s) correctly in the
1
card slot(s), as shown in the following images:
3. Finally, insert the battery and place the rear cover of the
mobile phone.
Please keep the SIM card out of the reach of children.
The card and the contacts are vulnerable to damage due
to scratching or bending. Therefore, be careful when using,
inserting, or removing the card.
Insert Memory Card
To insert memory card, switch off the phone and remove the rear cover
and the battery and insert the memory card in the card slot, as shown
in the following image:
After inserting the memory card, place back the battery and the rear
2
cover of the mobile phone.
Use only compatible memory cards approved by Micromax
with this device. Incompatible memory cards may damage
the card or the device and corrupt the data stored in the
card.
Turning Your Phone On/ Off
Long press the End/Power key to switch on and off your phone.
Charging the Battery
Before using the device for the first time, you must charge the battery.
You can charge the device with a travel adapter or connecting the
device to a PC with a USB cable.
3
You can also use a compatible USB charger to charge your
battery.
Use only Micromax approved chargers and cables.
Unapproved chargers or cables can cause battery to
explode or damage your device.
Using Your Phone
Lock/Unlock the phone
To unlock your device, long press the lock icon on the keypad to
lock/unlock the phone, as shown in the following images:
Make a Call
Dial a number and press the call key to make a call.
You can also call a number from the phonebook or call log in
the same way.
To change the in-call volume, press the up and down
navigation keys.
4
Loading...