Micro Matic Pro-Line E, MDD58-E, MDD68-E, MDD17-E, MDD78-E User Manual
...
USER MANUAL & SET UP GUIDE
PRO-LINE
E-SERIES
SAFETY
FIRST!
READ INSTRUCTIONS
COMPLETELY
Before getting started
please read this user
manual and at all times
follow the important
safety instructions.
VERSION 2.0
TABLE OF
CONTENTS
1. GENERAL INFORMATION ......................................................................................................... 4
2. RECEIVING AND INSPECTING ................................................................................................. 5
3. SPECIFICATIONS ....................................................................................................................... 6
4. INSTALLATION ........................................................................................................................ 7-8
4.1 UNCRATING ........................................................................................................................ 7
4.2 SEALING ............................................................................................................................. 7
4.3 LOCATION ........................................................................................................................... 7
4.4 TAPPING INSTRUCTIONS ................................................................................................ 8
4.5 DATA PLATE ....................................................................................................................... 8
4.6 ELECTRICAL CONNECTIONS .......................................................................................... 8
4.7 SHELVING INSTALLATION ............................................................................................... 8
5. OPERATIONS..........................................................................................................................9-11
5.1 MECHANICAL TEMPERATURE CONTROL ..................................................................... 9
5.2 DESCRIPTION OF BUTTONS ON THE CONTROLLER ................................................. 10
5.3 ELECTRONIC TEMPERATURE CONTROL ..................................................................... 11
5.4 DEFROST .......................................................................................................................... 11
6. MAINTENANCE ........................................................................................................................ 11
6.1 STAINLESS STEEL CARE AND CLEANING ..................................................................11
6.2 CLEANING THE CONDENSER COIL .............................................................................. 12
6.3 DRAIN MAINTENANCE ................................................................................................... 12
6.4 INSTALLING AIR CHANNEL(S) AND DRAFT TOWER(S) ............................................ 13
6.5 INSTALLING GLASS RINSER WATER INLET ................................................................13
7. TROUBLESHOOTING ................................................................................................................ 14
8. WIRING DIAGRAMS .................................................................................................................. 15
9. WARRANTY ............................................................................................................................... 16
| 2
PRO-LINE E-SERIES REFRIGERATION USER GUIDE AND SET UP MANUAL
MDD78S-E
As Shown
| 3MICROMATIC.COM SUPPORT (888) 864-9400
GENERAL
1
The contents of these operating instructions enable safe and proper handling of Pro-Line
E-Series Refrigerations. Read the operating instructions completely before operating and
always keep the within easy reach of the units. The illustrations in this manual may be
different from the actual device.
INFORMATION
1.1 TERMS USED
DANGER
Causes serious injury or
death if not observed.
WARNING
Can result in serious injury
or death if not observed.
ATTENTION
May cause minor or
moderate injury.
1.2 LIMITATION OF LIABILITY
The manufacturer accepts no liability for:
• Damage caused by incorrect operation
• Inappropriate use
• Inadequate maintenance or cleaning
NOTICE
Useful information or
general information.
• Failure to observe the technical documentation
• Technical modications by the user
• Use of non-approved spare parts
1.3 INTELLECTUAL PROPERTY AND COPYRIGHT PROTECTION
All rights reserved. Any - including, but not limited to - duplication, dissemination and other
uses of the texts, graphics or other representations without the consent of the manufacturer.
Contact Information:
Micro Matic USA, Inc.
2364 Simon Court
Brooksville, FL 34604
1.4 CUSTOMER SERVICE
If further technical information is needed, please contact the Service Department directly.
Please have the model number and serial number.
Service Support: (888) 864-9400
servicerequest@nordon.com
| 4
PRO-LINE E-SERIES REFRIGERATION USER GUIDE AND SET UP MANUAL
RECEIVING
2
Upon receiving your new Micro Matic Pro-Line™ Refrigeration E-Series™ equipment, check
the package and the unit for any damages that may have occurred during transportation.
Visually inspect the exterior of the package. If damaged, open and inspect the contents
with the carrier. Any damage should be noted and reported on the delivering carrier’s
receipt.
In the event that the exterior is not damaged, yet upon opening, there is concealed
damage to the equipment notify the carrier immediately. Notication should be made
verbally as well as in written form. Request an inspection by the shipping company of the
damaged equipment. Retain all crating material until inspection has been made. Finally,
contact Micro Matic.
Open the compressor compartment housing and visually inspect package. Be sure lines
are secure and base is intact.
A NOTE FROM OUR QUALITY CONTROL MANAGER
Congratulations on your new purchase. We would like to welcome you to the Micro Matic
family. The unit in front of you is a great piece of equipment that will become one of your
most reliable tools in your daily operations for years to come!
AND INSPECTING
Prior to shipping your unit, our trained service technicians tested your unit for a period of
12 hours. This performance test was recorded and a copy of the results is included with
this service manual. During this test, our highly qualied personnel inspected your machine for leaks, lose components, and improper noise levels. We also tested the cooling
performance in an effort to give you the best and most reliable unit possible.
| 5MICROMATIC.COM SUPPORT (888) 864-9400
Loading...