DRIP TRAY
WALL MOUNT 16” WITH GLASS RINSER
• Add European style while creating dispense excitement.
• Condition the glass before pouring – invert glass, push down on sprayer
for cold water rinsing.
• Easy installation: beverage shanks mount through and secure tray to wall.
• Welded corners, nished smooth for safety and appearance.
DP-322LD-4GR
Brushed Stainless Steel
Stainless Steel for improved
hygiene and durability.
www.micromatic.com • 1 (866) 327-4159
Job Number:_____________________________________________ Location: ________________________________________________________________________
WALL MOUNT WITH GLASS RINSER
Specifications
Micro Matic reserves the right to change specifications without notice.
Part No. Dimensions Description Shipping Weight Box Dimensions
DP-322LD-4GR
16” Width 4 Holes TBD TBD
Rinser Water Inlet Installation
• Always check local plumbing codes first.
• Install in-line water regulator set at 15 PSI from the street water supply (no greater, perfect operating pressure).
• Install in-line one way check valve from the street water supply (prevents pressure drop which can cause leaking).
• Install in-line shut-off for the rinser system from the street water supply (this must be turned off nightly).
• If teed into soda system make sure system can handle the increased water demand. Have plumber install a
45° 1/2" O.D. barb for the drains if line is not hard plumbed into the system.
• Install a shut-off for the rinser water supply if line is not hard plumbed into the system.
Dimensions
140mm
5 1/2"
51mm
2"
203mm
8"
267mm
10 1/2"
406mm
16"
102mm
4"
GRAIN DIRECTION
GR-1581
81mm
3 1/8"
321mm
DETAIL DRAIN
162mm
6 3/8"
38mm
1 1/2"
1/2”-14 NPT Threaded 1/2” Deep
356mm
14"
13"
19mm
3/4"
162mm
6 3/8"
Toll-Free: 1-866-327-4159
www.micromatic.com
West
19791 Bahama St.
Northridge, CA 91324
Tel. (818) 701-9765
Fax. (818) 701-9844
Central
10726 North Second St.
Machesney Park, IL 61115
Tel. (815) 968-7557
Fax. (815) 968-0363
Southeast
2364 Simon Ct.
Brooksville, FL 34604
Tel. (352) 799-6331
Fax. (352) 796-2429
01662-D0415
©2015 Micro Matic USA, Inc. All Rights Reserved.
Northeast
4601 Saucon Creek Rd.
Center Valley, PA 18034
Tel. (610) 625-4464
Fax. (610) 625-4466