www.microla b.cn
Microlab El ectronics Company Ltd.
Disclaimer: All symbols and logos belong to the respective brand holder or registered holder. All
specifications and information are subject to changes without further notice. Slight variations and
differences might appear between the printed photos and actual product due to product enhancement.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Microlab Electronic Co., Ltd is under license. other trademarks and trade names are those of
their respective owners.
Made in China
© 2012 All rights r eserved
MD212
QD ID: B019889
Eng lish 2
Caution:
To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or
moisture. No user-serviceable parts inside. Refer servicing to qualified personnel only.
Explanation of Graphical Symbols:
The lightning flash within an equilateral triangle is intended to alert you to the presence of
uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to
constitute an electric shock to a person or persons.
The exclamation point within an equilateral triangle is intended to alert you to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
product.
WARNINGS:
1. Read Instructions - All the safety and operating instructions must be read before the product is
operated.
2. Retain Instructions - The safety and operating instructions should be kept with the product
for future reference.
3. Heed warnings - All warnings on the product and in the operating instructions should be
adhered to.
4. Follow instructions - All operating and users instructions should be followed.
5. Installation - Install in accordance with the manufacturer's instructions.
6. Power sources - This product should be operated only from the type of power source indicated by
the marking adjacent to the power cord entry. If you are not sure of the type of power supply to your
home, consult your product dealer or local power company.
7. Grounding or polarization - the product is not required to be grounded. Ensure the plug is fully inserted
into the wall outlet or extension cord receptacle to prevent blade or pin exposure. Some versions of the
product are equipped with a power cord fitted with a polarized alternating line plug (a plug having one
blade wide than the other). This plug will fit onto the power outlet only one way. This is a safety feature. If
you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to
fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the
polarized plug. When using an extension power-supply cord or a power-supply cord other than that
supplied with the product, it should be fitted with the appropriate molded plugs and carry safety
approval appropriate to the country of use.
8. Power cord protection - Power-supply cords should be routed so that they are not likely to be walked on,
kinked or pinched by items placed on or against them, paying particular attention to cords from plugs,
receptacles and the point where they exit from the appliance.
9. Overloading - Do not overload wall outlets, extension cords or multiple sockets, as this can result in a risk
of fire or electric shock.
10. Ventilation - The product must be properly ventilated. Do not place the product on a bed, sofa, or other
similar surface. Do not cover the product with any items such as tablecloths, newspapers, etc.
11. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or
other products including amplifiers that produce heat. No naked flame sources, such as lighted candles,
should be placed on the apparatus.
12. Water and moisture - To reduce the risk of fire or electric shock, do not expose the product to train,
dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near
water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a
swimming pool, or etc.
13. Object and Liquid Entry - Never push objects of any kind into this product through openings, as they
may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product. Do not place any object containing liquid on top of the
product.
14. Cleaning - Unplug the product from the wall outlet before cleaning. The cabinet of the subwoofer
may be cleaned by dusting with a dry cloth. If you wish to use an aerosol cleaning spray, do not
spray directly on the cabinet; spray onto the cloth. Be careful not to damage the drive units.
15. Attachments - Do not use attachments not recommended by the product manufacturers, as
they may cause hazards.
16. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table.
The product may fall, causing serious injury to a child or adult, and serious damage to the
product. Use only with a cart, stand, tripod, bracket or table recommended by the
manufacturer or sold with the product. Any mounting of the product should follow the
manufacturers’ instructions and should use a mounting accessory recommended by the
manufacturer.
17. Moving the product - A product and cart combination should be moved with care. Quick stops, excessive
force and uneven surfaces may cause the product and cart combination to overturn.
18. Un-use periods - The power cord of the device should be unplugged from the outlet during lightning
storms or when the apparatus is left unused for a long period of time.
19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Please remove the power plug form the main power source or wall power source when not in use. When
plugged in to a power source, the system is in standby mode, so the power is not entirely cut off.
21. Replacement parts - When replacement parts are required, ensure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
22. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and rating.
The correct fuse specification for each voltage range is marked on the product.
23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If
you do, the speaker may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnecting the product from the power supply is by removing the
power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product
must remain freely accessible at all times while the product is in use.
25. Try to install the product near a wall socket or extension cord and shall be easily accessible.
26. The highest environmental temperature suitable for this product is 40°C.
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
2. Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
FCC EXPOSURE STATEMENT:
This equipment complies with FCC radiation exposure limits setforth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance
20cm between theradiator & your body
Enh ance an d power yo ur tabl et’s mus ic and sound. Comp act
des ign and s mall soundbar syste m with tw o quali ty spea ker
dri vers. Broad en your t ablet s ound range and lis ten to di stinc t sound
effect s. Strea m music w irele ssly from you r smartphone, t ablet , or even
your noteboo k. Listen to e nhanc ed ampl ified sound from y our favourite
gad gets. Conne cts to any products with Blu etoot h® wireless tec hnolo gy
usi ng A2DP and H FP pro files.
Talk and pickup y our sma rt phone cal ls dire ctly wi th buil t-in sp eaker
pho ne feature. E asy connection with alte rnati ve 3.5mm stereo pl ug for
wid e range g adget s uppor t. Mount you r tablet or smart p hone in f ront
wit h quick p ull-out tr ay. Comes with rech argeable batte ry for port ability.
Travel wit h your ta blet, o r smartpho ne, and e njoy to enhanced s ound
everywhere you go.
operation.
Features
+
I
BL-5C
Bat ter y
ori entat ion
Wireless mus ic stre aming w ith Blu etoot h® wire less technology
Sup ports A2D P and HF P profiles
Qualit y stere o speak er system with bui lt-in a mplif ier
Ide al for movies, gam ing, music and PC a pplic ation s
Cle ar and un colou red sound
Soundb ar type desi gn
Con nects t o any 3.5mm stereo j ack eas ily e.g. , table t, PC, n otebo ok,
Mp3/Mp4, C D/DV D playe r, etc.
Rechar geabl e battery wi th easy replacem ent
Illustrations
Rig ht
Lef t
Hand sfree f uncti on LED : AUX / Bl uetoo th Pair ing
Top
vie w
3.5 mm s tereo p lug Cha rging L ED Min i-US B Off/ AUX/ Blueto oth
Rea r
vie w
Front View
Packing List
MD212 speaker 1 pc
US B cable 1 pc
Rechar geabl e battery, B L-5C 1 pc
Use r manua l 1 pc
Sup port le g Batte ry comp artme nt Audio c able re cess
Connection (AUX)
1 2
Swi tch to AU X mode
Connect to
3.5 mm stereo
jack
Audio
input jack
on playback
device
Pull out tray and
3
mount tablet or
smartphone
EN
6
Connection (Bluetooth®)
Pull tray o ut
1 2
Top view
7
4
swi tch to
Blue tooth ® mode
Turn on B lueto oth®
3
pair ing mod e:
a) Pai ring ti meout
b) Cha nge pai ring
smar tpho ne
or
more than
2 sec s
Pairing mode : Blue LED blink r apidl y
5
6
Pairing
process
7
Pair with t he
spe aker
EN
8
9
8
Sma rtphone:
Turn o n
Blu etoot h®
mod e
Sca n for
dev ices
Paired
not
con necte d
Sel ect “connect” with speaker
BL-5C
10
Blu e LED
ill umina tes
ste adily
Connec ted
to sp eaker
11
Botto m vi ew
Suppo rt l egs
Swing o pe n for add ition al s uppor t
9
Pla ce the smart phone o r table t
12
upr ight on t he tray
Commence mus ic play back
# smart phone a nd tabl et
not inc luded i n packa ge.
Tradema rks and l ogos be long to t heir res pect ive owne rs.
USB cha rg ing LED
(red wh en c hargi ng /
illum in ation o ff - fu ll c harge d)
Mini- US B
USB cab le
BL-5C t yp e Lithi um batt er y
(Batt er y to rema in in com pa rtmen t
durin g us age)
Power f ro m PC / Note book / US B hu b
EN
10
1) Ch arge fo r 4 hours
bef ore ini tial us e
2) Du ring us e, charg e till
red L ED tur ns off
1
2
or
AUX mode: fro m 3.5 mm pl ug Bluet ooth ® mode: i nitia te
pai ring an d conne ction
11
3
4
Technical Information
Amplifier
Output power: 2 Watt RMS
Power distribution: 1 Watt x 2 RMS
Harmonic distortion: < 0.5% 1 W 1 kHz
Frequency response: 150 Hz - 20 kHz
Signal/Noise ratio: > 75 dB
Separation: > 45 dB
Speaker
Driver type: 1.5" x 2
Driver rated power: 3 Watt x 2, 4 Ohm
Interface
Input: 3.5mm stereo, Mini-USB
Blue tooth ® wirel ess tec hnolo gy B lueto oth® v2. 1, A2D P, HFP
Power
Batt ery, BL 5C 3.7 V / 100 0 mAh Lit hium
re charge able ba tter y
Frequently Asked Questions
12
Sta rt
playb ack
on me dia
playe r suc h as
sma rtphone , tab let ,
iPa d, note book or
Mp3 /Mp4 pl ayer
-
Media p la yer
Question Answer
+
Pairing fail ed Ens ure device suppo rts
How to tell Pairing is
suc cessful?
Bat tery charg ing and use Ini tial ch arge for 4 hours, an d
Blu etoot h® v2.1 and above
Blu e LED is lit st eadil y, pleas e
sta rt the music play back
kee p battery in side du ring us e
Loading...