LED MAX ZOOM RGB
Operation Manual
Operation Manual
LED MAX ZOOM RGB can make very bright colorful and dynamic light scenery effects. The operation
panel has digital display and three buttons------MODE, UP, DOWN. You can adjust the focus through adjusting
the distance of the lens. The unit can store last run mode when shut off, and will resume when powered on. This
product has a temperature protecting function. When it is on it will be shut off automatically when the
temperature is beyond 85°C. But it won’t impact other combined products. When you re-start it, it can run
correctly within 85°C.
A Specification:
1. Weight: 14.8 lbs
2. Size: 11.8” x 10.9” x 8.7”
3. Power input: 110~240V 50-60Hz
4. Wattage: 80W
5. LEDS: 24PCS RGB 3W
6. Beam angle of LEDs: 10°~60°
7. 3PIN XLR in & out
8. Built-in microphone
9. LED digital display
10. 5 Channel DMX
It has nine kinds of operation mode they are as follows:
1. Static colour program select running mode
2. Three colours change program running mode
3. Seven colours change pr ogram running mode
4. Three colour mixing program running mode
5. Seven colour mixing program running mode
6. Auto-run program mode
7. Sound-active program running mode
8. Slave running program mode
9. DMX control run ning program mode
To select one of these run modes, press MODE button and UP button, when it is on. You can initialize it at extra
factory setting, running on the auto-run program mode. Under any running mode, press the MODE+UP button,
the LED display light will be on, When you press the MODE+DOWN but ton, the LED display will tu rn off until
you press any button .If you don’t press any button, the LED display light will be turned off automatically after
20 seconds.
1. Manual Zoom Control
Press MODE button for 4 seconds (except under slave and DMX mode), th e unit will di splay “O.T.r.” and after
2 seconds the display will show 000 or value zoom set to (0-190),0 is start (10°),190 is maximum (60°). To
adjust the Zoom, use the UP and DOWN buttons to set to your preferred setting. Once you have reached yo ur
desired size, press the mode button to go back to your standalone setting. The display will go back to the
previous mode you were in. The setting will remain in memory until you change it again.
2. Static colour program select running mode
Press “MODE ” button, select static colour, select program runnin g mode. At this time, the display reads “CL-×”,
Press “UP” or “DOWN” to select static colour 0-7 under this mode.
3. Three colors change program running mode
Press “MODE” button, select three colours change program running mode. At this time, the three digital tube
displays “JXX” .Press UP or DOWN button to select the change speed grade 1-99 under this mode.(From slow to
quick)
4. Seven colours change program running mode
Press “MODE” button, select seven colours changed program running mode. At this time, the three digital tube
displays “J.X X”. Press UP or DOWN to select change speed grade 1-99 under this mode. (From slow to quick)
5. Three colour mixing program running mode
Press “MODE” button, select three color mixing program running mode. At this time, the three digital tube
displays “FXX”. Press UP or DOWN to select change speed grade 1-99 under this mode. (From slow to quick)
6. Seven colour mixing program running mode
Press “MODE” button, select seven colour mixing program running mode. At this time, the three digital tube
displays “F.XX”. Press UP or DOWN to select change speed grade 1-99 under this mode. (From slow to quick)
7. Auto-run program mode
Press “MODE” button, select auto-run program mode. At this time, the three digital tube displays
“A.-.-.”.Pressing UP or DOWN is no use under this mode. The seven colors changed program and seven color
mixing program. Running speed is the current speed of seven colors changed program and seven mixing
program.
8. Sound-active running program mode
Press “MODE” button, selecting auto-run program mode. At this time, the three digital tube displays “S.XX”.
Press UP or DOWN to select sound-active sensitivity grade 0-31.0 is off sound-active. 1 is the lowest sensitivity,
31 is the highest sensitivity.
9. Slave running program mode
Press “MODE” button, selecting auto-run program mode. At this time, the three digital tube displays “S.L.A.”.
Pressing UP or DOWN is no use under this mode.
10. DMX control running program mode
Press MODE button, select DMX running program mode. At this time, the three digital tube displays DMX
address “X X X”. Press UP or DOWN to select DMX address .You can set 512p cs addresses. It will flicker when
the controller has no signal.
1)DMX mode
CHANNEL VALUE FUNCTION
000-189 DIMMER
CH1
CH2 000-255 RED
CH3 000-255 GREEN
CH4 000-255 BLUE
190-250 FLASH/STROBE
251-255 NO FUNCTION
ZOOM mode
CH5 000-255
°
0 = 10
255 = 60
°
Instruction “X” means number 0~9,UP and DOWN button is no longer a beat function under static color select
program. Press MODE, UP and DOWN buttons at the same time, three digital tube displays alternatively, LED
output is off. At this time, press UP or DOWN to adjust the position of electrical machine. It is convenient for
repairing when it has any problem. The lens is easy to take out or put in.
Loading...