Microh LED MAX PAR Operation Manual

LED MAX PAR
Operation Manual
MICROH
Operation Manual
LED MAX PAR can make very bright co lorful and dynamic light scenery effects. It is widely applied to
A Specification:
1. Weight: 6.7kg
2. Size: 30×27×22cm 3: Power input: AC 120V/240V, 60Hz/50Hz
4: Wattage: 80W 5: LEDS: 24PCS RGB 3W LEDs: R8, G8, B8 6: Beam angle of LEDs: 30 degree 7: 3PIN female XLR socket and 3PIN male XLR socket 8: Built-in microphone 9, Led digital display
B. Function description:
1, By using MODE button to choose the required working mode, then using UP and DOWN to adjust the relative
reference date
AColor Choose under this modeLED display show C.L.X,
to adjust “X”. 0---BLACK 1---RED 2---green 3---blue 4---purple 5---yellow 6---cyan 7---white
B Color change: under this mode, the display show “J. X X”, “X X”=01-99 means the speed of color
change, press UP or DOWN button to adjust the speed of color change.
C Color fade: under this mode, led display show “F.X.X”, “X X”=( 01~99means the speed of color
fade, press UP or DOWN button to adjust the speed of color fade.
DAuto mode:under this mode, led display show “
E Sound modeunder this mode, the led display show “S.XX”, “XX”=(00~31)means levels for sound
sensitivity. Press UP or DOWN button to adjust the levels of sound sensitivity.
A - -“, auto run the color change and color fade.
X”=0-7, press UP or DOWN button
F Slave mode:under this mode, the led display show “S.L.A.”,the master fixture decide the running state
of current fixturethe above A~E all have master function.
GDMX mode 1under this mode, the led display show X X X”, X X X=001-512, the current fixture
covers 4 DMX channel.The DMX value and function is as follows:
CHANNEL VALUE FUNCTION
000-189 DIMMER
CH1
190-250 FLASH
251-255 NO FUNCTION CH2 000-255 RED CH3 000-255 GREEN CH4 000-255 BLUE
2, Led display ON/OFF: When the device is turn on, the led display always stays on by press “MODE” button plus “UP” and press “mode” button plus “off” the led display turn off after 20 seconds in which any button are not pressed.
Loading...