Microelectronics Technology RU 888 0 User Manual

MTI RU-888-0 RFID Module

User Manual Version 4.0

MTI Group Proprietary Information

Any unauthorized use, duplication, reproduction, or disclosure of this

document may be considered as infringement of MTI Group’s intellectual

Content

1. Start Demo SW

2. Advanced Reader Setting

3. Inventory Run

4. Advanced Tag Setting

WARNING：Please keep more than 20 cm away when doing the test.

1. Start Demo DW

1. 1 Double click the icon as in Fig.1

Fig.1

1.2 Plug Antenna and USB cable you could see the Demo SW shown

Fig.2

Online as in

Fig.2

2. Advanced Reader Setting

2. 1 Right click the MTI module and will show “Reader Setting ” on screen. You

could start to set the region, frequency, and output power as in Fig.3.

Fig.3

2.2 Please you must set Region, Power Level, and choose Hopping in Frequency

Column when you would like to do the normal test. Press Submit to sent the parameters

and press exit to leave this window as shown in Fig.4. 　「RSSI and LBT」and「Gen2

Setting」Column could let you do more

advantage setting. 　　The default value of sensitivity level is -84 dBm. Please shift

the button if you