Microdigital MDC-7220WDN-30 User Manual

P/N 3690-0144P

FEATURES

SPECIFICATION

MDC-7220WDN-30

WDR IR INDOOR DOME CAMERA

USER’S MANUAL

CODE DESCRIPTION

PACKING LIST

Manual

Service Monitor Cable

Mounting Screw

Opener Key

UTC Remote

Controller

[Option]

Remote Controller

USER INFORMATION

CAUTION

RISK OF ELECTRIC SHOCK, DO NOT OPEN NO USER-SERVICEABLE PARTS INSIDE.

REFER FOR SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSISTING OF A
RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS EXCLAMATION POINT SYMBOL IS INTENDED TO ALERT THE USER TO
THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVIC­ING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

This marking on the product, accessories or literature indicates that the
product and its electronic accessories should not be disposed of with other
household waste at the end of their working life. To prevent possible harm to
the environment or human health from uncontrolled waste disposal, please
separate these items from other types of waste and recycle them responsi­bly to promote the sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take these
items for environmentally safe recycling. Business users should contact their
supplier and check the terms and conditions of the purchase contract. This
product and its electronic accessories should not be mixed with other com­mercial wastes for disposal.

CAUTION

IR LED

-30

Built-in IR LED

IR

LED

UTC

MDC-xxx0

- DC 12V

POWER SOURCE

DC 12V

UTC Remote Control

DAY / NIGHT FILTER & MECHANISM

WDN

TRUE DAY / NIGHT (ICR-IR Cut Filter Removable)

DAY / NIGHT

DC Auto
Iris Lens

FILTER CHANGE

LENS

VARIFOCALVARIFOCAL

• Any changes or modifications in construction of this device which are not expressly ap­proved by the party responsible for compliance could void the user’s authority to operate
the equipment.

• This installation should be made by a qualified service person and should abide by all
local codes.

ⷀ

Warning

PRECAUTIONS

• Do not install the camera in ex­treme temperature conditions.

Only use the camera in the temperature ranges
of the specification.
Be especially careful to provide ventilation
when operating under high temperatures.

• Do not install or use the camera
in an environment where the
humidity is high.

It can cause the image quality to be poor.

• Do not install the camera under
unstable lighting conditions.

Severe lighting change or flicker can cause the
camera to work improperly.

• Do not touch the front lens of
the camera.

This is one of the most important parts of the
camera. Be careful not to leave fingerprints or
dirts on the lens cover.

• Do not drop the camera and
protect it from physical shocks.

It can cause malfunctions to occur.

• Never keep the camera pointed
directly at strong light.

It can damage the Image Sensor.

• Do not expose the camera to
radioactivity.

If exposed to radioactivity the Image Sensor
will fail.

• Do not expose the camera to
rain or spill beverage on it.

If it gets wet, wipe it dry immediately. Liquids
can contain minerals that corrode the elec­tronic components.

• Do not expose the camera to
radioactivity.

If exposed to radioactivity the Image Sensor
will fail.

Ignoring this information may result
in material loss and/or serious
personal injuries including death.

Indicates “Never Allowed.”

Ignoring this information may
result in material loss and/or a
slight injuries.

Indicates “No Disas­sembling.”

Caution

1MFBTFEPOPUESPQPSIJUUIFQSPEVDU

1MFBTFEPOPUEJTBTTFNCMFUIFQSPEVDU

Installation Circumstance

1MFBTFJOTUBMMUIFHPPETDPOTJEFSJOHUFNQFSBUVSFBOEIVNJEJUZ
1MFBTFEPOPUJOTUBMMUIFHPPETXIFSFFMFDUSJDJUZnPXT

NOTE

• Exposure to a spotlight or an object emitting strong light may cause smear or blooming.

•

Ensure that the power source complies with normal specifications before supplying it to
the camera.

• Power supply (Adaptor : DC12V).

- To avoid fire or shock hazard, must use a UL listed power supply.

• Monitor Impedance.

- Set the impedance switch to 75 ohm standard position.

- When monitor is set to high impedance mode, the picture becomes blurred.

In this case, just check the position of the monitor impedance switch.

• 1/3" 960H Double Scan High Sensitivity CCD

• Varifocal 2.8~12.0mm Lens

• ICR (True Day & Night)

• Color 700 TV Lines, BW 800 TV Lines

• Wide Dynamic Range, Adaptive Tone Reproduction (ATR-Ex)

• 2D+3D Noise Reduction, HLC, DIS, Privacy Mask, Intelligent Motion Detection

• Intelligent Object Detection

• 30 units of IR LEDs

• OSD Menu Control over UTC

• 12VDC

Model no. MDC-7220WDN-30
Image Sensor 1/3" 960H Double Scan High Sensitivity CCD
Signal System NTSC PAL
Scanning Frequency(H) 15,734KHz(H) 15,625KHz(H)
Scanning Frequency(V) 59.94Hz(V) 50.00Hz(V)
Total Pixel 1020(H) x 508(V) 1020(H) x 596(V)
Effective Pixels 976(H) x 494(V) 976(H) x 582(V)
Horizontal Resolution Color 700 TV Lines, BW 800 TV Lines
Video Output Level Composite 1.0Vp-p(75Ω load)
S/N Ratio More than 52dB (AGC off)
Lens Mount Varifocal 2.8~12.0mm Auto Iris Lens, ICR (True Day & Night)
Min. Illumination 0 Lux (IR LED ON)
IR LED 30 units of IR LEDs
Shutter Speed 1/60sec.~1/100000sec.(60Hz) 1/50sec.~1/100000sec.(50Hz)
Exposure Auto / Shutter PRI / Manual
Lens DC / Video / Manual
Gain Control On / Off (Max 30dB)
Digital Slow Shutter Man x2~x512 / Off
Brightness 1 ~ 15 Steps
WDR On / Off, Wide Dynamic Range
BLC On / Off
Day & Night Day / Night / Auto / Ext
White Balance ATW / One Push / Indoor / Outdoor / Manual / Auto
Chroma Low / Mid / High
Image HLC / DNR / HR / Mirror / Sharpness / Effect / Freeze / E.Zoom (Max x2~x32)
DNR Off / Manual / Auto
HR 1~7 Steps / Off
Privacy Mask 16 Positions / Off
Motion Detection 3 Positions / Off
Object Detect ion On / Off
Special Sync / Phase / DIS / Defect Detection / Scene Mode / Comm
DIS On / Off
Scene Mode User / Normal / Traffic / Back Light / Day&Night / Casino
Multi Language English / Chinese / Korean / Japanese

OSD

OSD Control over Coaxial Cable by MDR-x490, x690, x900 or UTC Remote

Controller with 3rd Party DVR

Operating Temperature

(-)10℃ ~ (+)50℃

Operating Humidity 95% RH max
Standard CE, FCC
Power Consumption 12VDC ± 10%, 360mA

WDR

Dual Scan

INSTALLATIONCONNECTION

COMPONENTS

DESCRIPTION

Dimension(mm)

1 Lens
2 IR-LED
3 OSD Board

4 Zoom / Focus Lever

5 3 Axis bracket

·

Adjust pan, tilt and twist to give
the correct angle of view.

▶Specifications and Designs are subject to change without prior notice due to improvement

4

1

2

3

Ceiling

MOUNTING SCREW

BASE HOUSING

DOME COVER

DOME COVER
HOLDER

6

∅

101

3-

∅

5

∅

100

H

51.7

D

Remote Controller

Remote Controller

Monitor / DVR

DVD

Power Input

BNC Connector

Power Input

BNC Connector

UTC Control by Coaxial cable

When using MD 960H DVR

MD 960H DVR

DVD

When using 3 Party DVR

rd

FRONT VIEW

BOTTOM VIEW

1) Connection to Monitor

2) Connection to Power

- Connect the adaptor to the power input connector as shown in the following figure.
The Standard voltage for camera option : DC 12V± 10%,

Power Input

Power Input

BNC Connector

BNC Connector

- As the connecting method varies with the instruments, refer to the manual supplied with
the instrument.

- Only connect the cable when the power is turned off.

For 12V DC Power Type

- Connect the video-out jack to the video-in jack of monitor.

- Connect the power adapter to the power input connector.

- Use 12V DC power source.

- Use the power rated at least 1A (12VDC)

NO Function

Terminal

Color

Remark

#1 Video Output Yellow 1.0 Vp-p

#2 Power Input Red

12V DC(11V~13V),

Video Output

GND

Power(+)

GND

*Use recommendable
Power Supply

Min. 12W / 1A

OSD STRUCTURE

VBS-EXTRA

Push(set)

3

3-2 OSD SW

3-1 Service Monitor Terminal

3-23-1

• Open the dome with the opener key supplied.

• There are 3 mounting holes on the base housing

so that users can install the unit in any place such

as on the ceiling, on the wall, on the

fence and etc.

• Adjust picture direction pan & tilting.

• Close the dome cover on the base housing.

Model no. MDC-7220WDN-30

Dimension

Diameter 130mm

Height 106.6mm

IR LED 30 units of IR LEDs

Power Consumption

Normal 110mA

IR LED on 360mA

SETUP ME NU SUB MENU

MANUAL

HLC

DNR

NIGHT

FIX LEVEL : 255 (0~255)

LEVEL MIN : 6 (0~255)

LEVEL MAX : 255 (0~255)

ON COLOR GAIN : MID (LOW , , HIGH)

PATTERN : SET1(SET1, SET2, SET3)

POSH : 480 (0~959)

POSV : 290 (0~578) - PAL

LEVEL : MID (LOW, MID, HIGH)

ON

ON

ANTI CR
OFF

ON

DEFOG
OFF

LEVEL : MID (LOW, MID, HIGH)

FLK LESS
OFF

MODE : SHUTTER FIX (SHUTTER FIX, GAIN CNTL)

IR SHADE COMP

OFF

ON

LENS SHD COMP

OFF

ON
PATTER N : SET 1(SET1 , SET2 , SET3 )

POSH : 480 (0 ~959 )

POSV : 290 (0 ~578) - PAL

LEVEL : 06 (00~12)

IR LED

OFF

DAY/NIGHT

COLOR NIGHT
OFF

IR OPTIMIZER

OFF

ON (MODE)

MODE : AUT O (AUT O, CENT ER)

IR AREA ( Only Center Mode )

TOP : 4 (0~6)

BOTTOM : 6 (0~6)

LEFT : 3 (0~6)

RIGHT : 5 (0 ~6)

WEIGH T : 04 (0 0~15)

LEVEL : 3 (0~6)

DAY/NIGHT

DAY

BURST : OFF (O FF, ON )

AUTO

BURST : OFF (O FF, ON )

CNTL SIGNA L : INT (E XT1, EXT2)

DELAY CNT : 3 (0~255)

DAY->NIGHT : 90 (0~255)

NIGHT->DAY : 115 (0~255)

WDR/ATR-EX

OFF

ATR-EX
CONTRAST : MID (LOW, MID , HIGH)

CLEAR FACE : MID (LOW, MID , HIGH)

WDR
CONTRAST : MID (LOW, MID , HIGH)

CLEAR FACE : MID (LOW, MID , HIGH)

LEVEL : 41 (0~63)

PUSH LOCK

HLC/BLC
OFF

CLIP LEVEL 0 (0~255)

BLC

PUSH

USER1
B-GAIN : 234 (1~255)

R-GAIN : 244 (1~255)

USER2
B-GAIN : 235 (1~255)

R-GAIN : 244 (1~255)

AUTO
AELEVEL : 100 (1~250)

AGC MAX : 18dB (6dB~44.8dB)

SENSE UP : AUTO (OFF, AUTO)

WHITE BAL

ATW

SPEED : 245 (1~255)

DELAY CNT : 15 (1~255)

ATW FRAME : 128 (1~255)

ENVIRON MEN T : AU TO (A UTO , IND OOR, SU NN Y, SHAD E)

ADVANCE MENU

SCENE SE LECT

FULL AUTO

INDOOR
OUTDOOR
BACKLIGHT

ITS

CUSTOM

SHUTTER/AGC

FIX
SHUTTER : 1/50 (256FLD~1/10000)

AGC MAX : 6dB (6dB~44.8dB)

MANUAL
SHUTTER : 1/50 (256FLD~1/10000)

AGC MAX : 6dB (6dB~44.8dB)

SETUP MEN U

BRIHTNESS : 128 (0 ~ 255)

CONTRA ST : 32 (0 ~ 63)

SHARPNESS : 8 (0 ~ 15)

HUE : 64 (0 ~ 127)

COLOR GA IN : 12 8 (0 ~ 2 55)

MAG : 0 (0 ~ 255)

PAN : 512 (0 ~ 102 3)

TILT : 256 (0 ~ 511)

OFF

ON

AREA SEL : 1 /15 (1 /15, 2 /15,3 /15.....1 5/15 )

DISPLAY : O FF (OFF, O N)

POSITION

COLOR : RED (RED, GRE EN, BLUE , YELLOW , CYAN, MAG ENTA , WHITE , BLACK)

TRANSP : 1.0 0 (0.0 0, 0.50 , 0.75, 1 .00)

MOSIC : —-(—-, OFF)

OFF

DETECT SEN SE : 111 (0 ~ 127 )

INTERVAL : 0 ( 0 ~ 127)

BLOCK DISP : OFF (OFF, ON)

MASK AREA : 1~96 Bloc k

AREA SEL : 1/4 (1/4, 2/4, 3/4, 4/4)

AREA MOD E : OFF (ON , OFF)

TOP : 3 (0~15)

BOTTOM : 4 (0~15)

LEFT : 4 (0~23)

RIGHT : 8 (0 ~23)

INT

MANUAL

TYPE : DC (DC, VIDEO)

MODE : A UTO (AUT O, OPE N, CLO SE)

ADJUST

SPEED : 31 (0~255)

FLIP : OFF (OFF, V, H, VH)

LCD/CRT : LCD (LCD, CRT)

PROTOCOL : PELCO-D

ADDRESS : 1 (1~255)

BAUDRATE : 2400 (2400, 4800, 9600, 19200, 38400, 57600, 115200)

DATA BIT : 8BIT

PARITY : OFF (OFF, OD D, EVEN )

STOP BIT : 1BIT

OFF

A~Z…..POS

LANGUAGE English, Japanese, German, French, Russian, Portuguese, Spanish (Chinese )

VERSION 5.0.0

REGISTRA TION

REG. POINT : O FF (OFF, WHIT E, BLACK)

CURSOR COLOR : WHITE (WHITE , BLACK, RED, G REEN, BLU E)

BLINK : OFF (OFF, ON )

REG. NUMBE R : 1/64 (1/6 4, 2/6 4 …... 64 /64)

LEVEL1 : 8 (0~255)

LEVEL2 : 255 (0~255)

RUN

BACK

CAMERA RESET
SAVE

NOT SAVE

CANCEL

BACK

MANUAL
AUTO

AUTO

SUB MENU

ADVANCE MENU

ON

SYNC MODE

LENS

MOTION AREA

AUTO

EXIT

W.PIX MASK

MAINTENANCE

ON

COMUNICATI ON

CAMERA ID

SYS SETTIN G

MOTION DE T

PRIVACY ASK

EZOOM

DIS

PICT ADJUST