Microdia SDHC 82 XTRA Plus User Manual

SDTM & SDHCTM MEMORY
CARDS OPERATING MANUAL

SPECIFICATIONS

Dimension: 24.0 (W) x 32.0 (L) x 2.1 (T) mm

Weight: Approx. 2g

Voltage Performance: 2.7 to 3.6 V

Temperature Performance:

Clock Frequency: Up to 25MB/sec

Humidity Performance: 5% to 95% RH

NOTE: Specifications are subject to change without notice.

REMOVAL THE PLASTIC CASE FROM BLISTER

1. Hold tight of the blister.

2. Hold the blister upside down with about an inch of distance between the blister and the table.

3. Use your fingers to push the edge of the plastic case.

4. Then plastic case with SD

-40°C to +85°C

TM

/ SDHCTM card will drop on the table

CONFIRMATION OF PARTS LIST

SDTM or SDHCTM

Memory card

Plastic Case Manual

TM

Memory Card)

(SD

Step 1

Step 1

(SDHCTM Memory Card)

Step 2 & Step 3

Step 4

(SDTM Memory Card)

REMOVAL AND STORAGE OF THE SDTM OR SDHCTM CARD IN PLASTIC CASE

1. Hold the plastic case tight when opening and closing.

2. Unlock and open the lid of the case.

3. Store or remove the SD

TM

/ SDHCTM card in the tray. Ensure the card is placed properly on the tray before closing the

case.

4. And then lock the plastic case.

Step 1 (SDTM Memory Card) Step 1 (SDHCTM Memory Card) Step 3 (SDTM Memory Card)

(SDHC

TM

(SDHC

Step 3

TM

Memory Card)

Step 4
Memory Card)

PRECAUTIONS FOR HANDLING AND STORAGE

• Keep out of the reach of children. Get medical advice immediately if swallowed.

• Do not touch the interface pin directly by hands, metal or hard objects.

• Do not modify or disassemble the SDTM / SDHCTM card.

• Do not wet, heat/fire, impact, drop or bend the SDTM / SDHCTM card.

• Do not use or store in a humid and dusty place; in hot place such as inside a hot car, under a blazing

sun, near fire, a stove, an air-conditioner outlet, etc.

• Do not expose to strong magnet fields, electrical noise and put near corrosive chemicals/gas. This may

cause damage through melting or the emission of heat/smoke or cause product failure.

• Do not place in cooking appliances such as microwave ovens or high-pressure containers.

• Do not detach the label on the SDTM / SDHCTM card. Do not attach other stickers/labels on the SDTM /

TM

card.

SDHC

DATA PROTECTION

• MICRODIA SDTM / SDHCTM Memory Card comes pre-formatted. Make sure to back up all the data on

TM

your SD

/ SDHCTM card before formatting.

• Slide down Write-Protect Switch to “LOCK” for preventing record/edit the card. Unlock the card

before reading/writing data.

• Do not remove the SDTM / SDHCTM card and switch off any equipment using the card when data is

being read, written and transferred. It can cause data to be destroyed.

• Insert the SDTM / SDHCTM card firmly in the correct orientation. The product will not operate

correctly if it is inserted in an incorrect orientation or not inserted all the way

• Parental Guidance is needed when a child uses the SDTM / SDHCTM card. Teach the child how to use

and protect the product and insure that the child follows your instructions.

Unlock

Lock

MICRODIA (USA)

Camden Ave., San Jose, CA 95120, USA

MICRODIA (UK)

Brickhill Drive, Manton Height, Bedford,
MK41 7QH, England

MICRODIA (HONG KONG)

International Sales Office
1371, HITEC, Trademart Drive, Kowloon Bay, Hong Kong
Tel: [phone] Fax: [phone]
Website:
Email:

http://www.microdia.com

[e-mail]