Microdia MS-Direct USB 2.0 User Manual

MS-DIRECT CARD READER

INSTALLATION GUIDE &

OPERATION MANUAL

INSTALLATION GUIDE

Thank you for purchasing MICRODIA® FlashMover® USB2.0 MS­Direct Card Reader. The FlashMover
Reader works with USB enabled Microsoft Windows 98, ME,
2000, XP or above, and Mac 9/X and higher systems. This
installation guide contains all the information you need to
install your FlashMover

®

USB2.0 MS-Direct Card Reader.

®

USB2.0 MS-Direct Card

For Windows Users

To install the FlashMover

®

USB2.0 MS-Direct Card Reader on Windows 98/98SE:

1. Do not plug the card reader into the PC USB port before the installation is completed.

2. Download the driver from www.microdia.com

or insert the Driver CD in the CD-ROM drive.

3. Double click the file after downloading or the CD-ROM will auto-run and pop out a Driver Installation Manual window.

4. In the Driver Installation Manual, select [Memory Stick]

5. The driver installation program will start to run and follow the installation instruction

6. After installation, reboot your computer.

7. Plug in your card reader into the USB port.

8. There is a new removable drive added to your computer.

9. Insert Memory Stick

NOTE: Please check MICRODIA

To install the FlashMover

TM

Card to access files in your card.

®

website, www.microdia.com, for downloading the latest driver.

®

USB2.0 MS-Direct Card Reader on Windows ME/2000/XP:

1. Plug the card reader into your computer USB port.

2. It is fully Plug-&-Play for Windows ME/2000/XP, no driver installation needed.

3. A new removable drive is added to your computer after plug in the card reader.
Insert Memory Stick

TM

Card to access files in your card.

For Macintosh Users

To install the FlashMover

®

USB2.0 MS-Direct Card Reader on Mac OS 9/X and above

1. Plug the card reader into your computer USB port.

2. It is fully Plug-&-Play for Mac OS9/X and above, no driver installation needed.

3. A new removable drive is added to your computer after plug in the card reader.

4. Insert Memory Stick

TM

Card to access files in your card.

NOTE:

- Please check MICRODIA

Please go to Mac website to update the latest version of Mac OS.

®

website, www.microdia.com, for downloading the latest driver.

Removing your MSTM card from the FlashMover® USB2.0 MS-Direct Card Reader

To remove the Memory Stick

TM

card on Windows system

1. Close all files that are opened and reside on the Memory Stick

2. You can remove your card safely after the LED stop blinking
To remove the Memory Stick

1. The Memory Stick

TM

card on Mac system

TM

card must be [EJECTED] or [UN-MOUNTED] by dragging the card’s disk icon in the trash.

CAUTION: Failure to properly [EJECT] the card before removing the card from the card reader could case data
loss or corruption.

TM

card.