Microdia MMCPLUS 82 XTRA Plus User Manual

MMCplusTM MEMORY CARD
OPERATING MANUAL

SPECIFICATIONS

Dimension: 32 (L) x 24 (W) x 1.4 (T) mm
Weight: Approx. 2g
Voltage Performance: 2.7V to 3.6V
Temperature Performance:
Clock Frequency: Minimum 2.4 MB/sec

Humidity Performance: 5% to 95% RH

NOTE: Specifications are subject to change without notice.

REMOVAL THE PLASTIC CASE FROM BLISTER

1. Hold tight the blister.

2. Hold the blister upside down with about an
inch of distance between the blister and the
table.

3. Use your fingers to push the edges of the

TM

MMCplus

4. Then MMCplus

card.

TM

card with plastic case will

drop on the table.

REMOVAL AND STORAGE OF THE MMCplusTM CARD

1. Hold the case with both hands when opening and closing.

2. Unlock and open the lid of the case.

3. Store or remove the MMCplus
card is placed properly on the tray before closing the case.

4. Lock the plastic case.

PRECAUTIONS FOR HANDLING AND STORAGE

• Keep out of the reach of children. Get medical advice immediately if swallowed.

• Do not touch the interface pin directly by hands, metal or hard objects.

• Do not modify or disassemble the MMCplusTM card.

• Do not wet, heat/fire, impact, drop or bend the MMCplusTM card.

• Do not use or store in a humid and dusty place; in hot place such as inside a hot car, under a blazing sun, near

fire, a stove, an air-conditioner outlet, etc.

• Do not expose to strong magnet fields, electrical noise and put near corrosive chemicals/gas. This may cause

damage through melting or the emission of heat/smoke or cause product failure.

• Do not place in cooking appliances such as microwave ovens or high-pressure containers.

• Do not detach the label on the MMCplusTM card. Do not attach other stickers/labels on the MMCplusTM card.

DATA PROTECTION

• MICRODIA MMCplusTM Memory Card comes pre-formatted. Make sure to back up all the data on your

MMCplus

TM

card before formatting.

• Do not remove the MMCplusTM card and switch off any equipment using the card when data is being read,

written and transferred. It can cause data to be destroyed.

• Insert the MMCplusTM card firmly in the correct orientation. The product will not operate correctly if it is

inserted in an incorrect orientation or not inserted all the way.

• Parental Guidance is needed when a child uses the MMCplusTM card. Teach the child how to use and protect the

product and insure that the child follows your instructions.

-40°C to +85°C

TM

card in the tray. Ensure the

Step 1 Step 2 & 3 Step 4

CONFIRMATION OF PARTS LIST

MMCplusTM memory card

Step 2 Step 3

Plastic Case Manual