Microdia miniSD, miniSDHC Operating Manual

miniSDTM & miniSDHCTM
MEMORY CARDS
OPERATING MANUAL

SPECIFICATIONS

Dimension: 20.0 (W) x 21.5 (L) x 1.4 (T) mm

Durability:

10,000 mating cycles

Weight: Approx. 1g

Bending:

10N

Voltage Performance: 2.7 to 3.6 V

Torque:

0.10Nm

Temperature Performance::

-40°C to +85°C

Drop Test:

1.5m free fall

Clock Frequency: Up to 25MB/sec

Humidity Performance: 5% to 95% RH

NOTE: Specifications are subject to change without notice.

CONFIRMATION OF PARTS LIST

miniSDTM or miniSDHCTM

Memory Card

miniSDTM Adapter or
miniSDHC

TM

Adapter

Plastic Case Manual

REMOVAL AND STOREAGE OF miniSDTM / miniSDHCTM MEMORY CARD

1. Hold tight of the blister.

2. Turn the blister upside down with about an inch of distance between the blister and the table.

3. Use your fingers to push the edges of the plastic case.

4. Then plastic case with miniSD

TM

/ miniSDHCTM card and miniSDTM / miniSDHCTM adapter will drop on the table

5. Unlock and open the lid of the plastic case.

6. Store or remove the miniSD

TM

/ miniSDHCTM card and miniSDTM / miniSDHCTM adapter in the tray. Ensure the

miniSD

TM

/ miniSDHCTM card and miniSDTM / miniSDHCTM adapter are placed properly on the tray before closing the

case.

Step 1

(miniSD

TM

Memory Card)

Step 1

(miniSDHCTM Memory Card)

Step 2 & Step 3

Step 4 & 5 (miniSD

TM

Memory Card)

Step 4 & 5 (miniSDHCTM

Memory Card)

Step 6

(miniSD

TM

Memory Card)

Step 6

(miniSDHCTM Memory Card)

MICRODIA (USA)

Camden Ave., San Jose, CA 95120, USA

MICRODIA (UK)

Brickhill Drive, Manton Height, Bedford,
MK41 7QH, England

MICRODIA (HONG KONG)

International Sales Office
1371, HITEC, Trademart Drive, Kowloon Bay, Hong Kong
Tel: [phone] Fax: [phone]
Website:

http://www.microdia.com

Email:

[e-mail]

PRECAUTIONS FOR HANDLING AND STORAGE

• Keep out of the reach of children. Get medical advice immediately if swallowed.

• Do not touch the interface pin directly by hands, metal or hard objects.

• Do not modify or disassemble the miniSDTM / miniSDHCTM card.

• Do not wet, heat/fire, impact, drop or bend the miniSDTM / miniSDHCTM.

• Do not use or store in a humid and dusty place; in hot place such as inside a hot car, under

a blazing sun, near fire, a stove, an air-conditioner outlet, etc.

• Do not expose to strong magnet fields, electrical noise and put near corrosive chemicals/gas.

This may cause damage through melting or the emission of heat/smoke or cause product

failure.

• Do not place in cooking appliances such as microwave ovens or high-pressure containers.

• Do not detach the label on the miniSD

TM

/ miniSDHCTM cards and adapter. Do not attach

other stickers/labels on the miniSD

TM

/ miniSDHCTM card and adapter.

DATA PROTECTION

• MICRODIA miniSD

TM

/ miniSDHCTM Memory Card comes pre-formatted. Make sure to

back up all the data on your miniSD

TM

/ miniSDHCTM card before formatting.

• Slide down Write-Protect Switch to “LOCK” for preventing record/edit the card. Unlock

the card before reading/writing data.

Unlock

Lock

• Do not remove miniSD

TM

/ miniSDHCTM card and switch off any equipment using the card

when data is being read, written and transferred. It can cause data to be destroyed.

• Insert the miniSD

TM

/ miniSDHCTM card firmly in the correct orientation. The product will

not operate correctly if it is inserted in an incorrect orientation or not inserted all the

way.

• Parental Guidance is needed when a child uses the miniSD

TM

/ miniSDHCTM cards. Teach

the child how to use and protect the product and insure that the child follows your

instructions.