microSDTM & microSDHCTM
OPERATING MANUAL
SPECIFICATIONS
Dimension: 11.0 (W) x 15.0 (L) x 1.0 (T) mm
Durability:
10,000 mating cycles
Weight: Approx. 0.4g
Bending:
10N
Voltage Performance: 2.7 to 3.6 V
Torque:
0.10Nm
Temperature Performance:
-40°C to +85°C
Drop Test:
1.5m free fall
Clock Frequency: Up to 25MB/sec
Humidity Performance: 5% to 95% RH
NOTE: Specifications are subject to change without notice.
CONFIRMATION OF PARTS LIST
microSDTM or microSDHCTM
Memory Card
microSD
TM
or microSDHCTM Adapter
Plastic Case Manual
REMOVAL AND STOREAGE OF microSDTM / microSDHCTM MEMORY CARD
1. Hold tight of the blister.
2. Turn the blister upside down with about an inch of distance between the blister and the table.
3. Use your fingers to push the edges of the plastic case.
4. Then plastic case with microSD
TM
/ microSDHCTM card and microSDTM / microSDHCTM adapter will drop on the table
5. Unlock and open the lid of the plastic case.
6. Store or remove the microSD
TM
/ microSDHCTM card and microSDTM / microSDHCTM adapter in the tray. Ensure the
microSD
TM
/ microSDHCTM card and microSDTM / microSDHCTM adapter are placed properly on the tray before closing
the case.
Step 1
(microSD
TM
Memory Card)
Step 1
(microSDHC
TM
Memory Card)
Step 2 & Step 3
Step 4 & 5
(microSD
TM
Memory Card)
Step 4 & 5
(microSDHC
TM
Memory Card)
Step 6
(microSD
TM
Memory Card)
Step 6
(microSDHC
TM
Memory Card)
MICRODIA (USA)
Camden Ave., San Jose, CA 95120, USA
MICRODIA (UK)
Brickhill Drive, Manton Height, Bedford,
MK41 7QH, England
MICRODIA (HONG KONG)
International Sales Office
1371, HITEC, Trademart Drive, Kowloon Bay, Hong Kong
Tel: +852.2801.7813 Fax: +852.2801.7060
Website:
http://www.microdia.com
Email:
sales@microdia.com
PRECAUTIONS FOR HANDLING AND STORAGE
• Keep out of the reach of children. Get medical advice immediately if swallowed.
• Do not touch the interface pin directly by hands, metal or hard objects.
• Do not modify or disassemble the microSDTM / microSDHCTM card.
• Do not wet, heat/fire, impact, drop or bend the microSDTM / microSDHCTM.
• Do not use or store in a humid and dusty place; in hot place such as inside a hot car, under
a blazing sun, near fire, a stove, an air-conditioner outlet, etc.
• Do not expose to strong magnet fields, electrical noise and put near corrosive chemicals/gas.
This may cause damage through melting or the emission of heat/smoke or cause product
failure.
• Do not place in cooking appliances such as microwave ovens or high-pressure containers.
• Do not detach the label on the microSD
TM
/ microSDHCTM cards and adapter. Do not attach
other stickers/labels on the microSD
TM
/ microSDHCTM card and adapter.
DATA PROTECTION
• MICRODIA microSD
TM
/ microSDHCTM Memory Card comes pre-formatted. Make sure to
back up all the data on your microSD
TM
/ microSDHCTM card before formatting.
• Slide down Write-Protect Switch to “LOCK” for preventing record/edit the card. Unlock the
card before reading/writing data.
Unlock
Lock
• Do not remove microSD
TM
/ microSDHCTM card and switch off any equipment using the
card when data is being read, written and transferred. It can cause data to be destroyed.
• Insert the microSD
TM
/ microSDHCTM card firmly in the correct orientation. The product
will not operate correctly if it is inserted in an incorrect orientation or not inserted all the
way.
• Parental Guidance is needed when a child uses the microSD
TM
/ microSDHC
TM
cards.
Teach the child how to use and protect the product and insure that the child follows your
instructions.
Loading...