Microdia Alumin PRO USB 2.0 User Manual

AluminPRO USB2.0

INSTALLATION GUIDE

Thank you for purchasing MICRODIA
AluminPRO USB2.0 Flash Drive works with USB enabled Microsoft Windows 98, 98SE, ME, 2000, XP or above, Linux

2.4.x, and Mac OS 9.X/X and higher syst ems. This installation guid e contains all the informat ion you need to
install your MICRO-FLASH

AluminPRO USB2.0 Flash Drive.

®

MICRO-FLASH AluminPRO USB2.0 Flash Drive. The MICRO-FLASH

MICRO-FLASH AluminPRO USB2.0 Installation Guid e

For Windows Users

To install the MICRO-FLASH

AluminPRO USB2.0 Flash Drive on Windows 98/98SE:

1. Do not plug the card reader into the PC USB port before the installation is completed.

2. Download the driver from www.microdia.com

or insert the Driver CD in the CD-ROM drive.

3. Double click the [Setup.exe] file after downloading or the CD-ROM will auto-run and pop out a Driver
Installation Manual window.

4. Select [install or update driver] and click [Start] Button, t h en system will install the driver auto matically.

5. Plug MICRO-Flash into USB port, system will install the hardware au tomatically

6. Open "My Computer", two icon labeled "Removable Disk" will appear in "My Computer" automatically.

NOTE: Please check MICRODIA® website, www.microdia.com, for downloading the latest driver.

To install the MICRO-FLASH

AluminPRO USB2.0 Flash Drive on Windows ME/2000/XP:

1. Just insert MICRO-Flash into USB port, then [Add new hardware] wizard will occur and system will install
MICRO-Flash automatically.

2. After that you can find a new [Removable Disk] in [My Computer].

For Linux Users

To install the MICRO-FLASH

AluminPRO USB2.0 Flash Drive on Linux 2.4.x

1. You can utilize command [Mount] to mount this device.

2. Insert MICRO-FLASH into USB port

3. Execute [cd/etc/sysconfig/( cat/et c/sysconfig/hwconf / more )]

4. Check the device information in [hwconf] and write down the mount point.

5. Make a new directory

NOTE:

Please check MICRODIA

-

- Please go to Mac website to update the latest version of Mac OS.

®

website, www.microdia.com, for downloading the latest driver.

For Macintosh Users

To install the MICRO-FLASH

AluminPRO USB2.0 Flash Drive on Mac OS 9.X and OS X system

1. Just insert MICRO-FLASH into USB port, then system will install MICRO-FLASH automatically . You can see the

disk icon in the [Desktop].

NOTE:

- Please check MICRODIA

Please go to Mac website to update the latest version of Mac OS.

-

®

website, www.microdia.com, for downloading the latest driver.

Removing your MICRO-FLASH AluminPRO USB2.0

To remove the MICRO-FLASH

AluminPRO USB2.0 Flash Drive on Windows system

1. Close all files that are opened and reside on the MICRO-FLASH card.

2. You can remove your card safely after the LED stop blinking

To remove the MICRO-FLASH

1. The MICRO-FLASH

AluminPRO USB2.0 Flash Drive on Mac system

must be [EJECTED] or [UN-MOUNTED] by dragging the card’s disk icon in the trash.

CAUTION: Failure to properly [EJECT] the card before removing the card from the card reader could case data loss
or corruption.

Most problems or technical issues can be resolved by simply visiting our Support Section in MICRODIA

www.microdia.com

or send us an email to [e-mail].

®

website,

Nov 2006 MICRODIA Ltd.