Regulatory Compliance Information
ATWILC3000-MR110UA
Regulatory Compliance Information
Revision 0.3
June’ 2018
Revision 0.3 (06/2018)
Preliminary
1
Regulatory Compliance Information
This document covers the Regulatory Compliance information which
will be part of the ATWILC3000-MR110UA Module datasheet and
related documents shared with customers.
Revision 0.3 (06/2018)
Preliminary
2
2.4GHz Band
1 W3525B039
Pulse Electronics Corporation
2 dBi
PCB
2 RN-SMA
-4
Microchip
2.2 dBi
Dipole
3 RFDPA870920IMLB301
WALSIN
1.84 dBi
Dipole
-DB
4 RFMTA331215IMAB701
WALSIN
3.8 dBi
Metal Stamp
5 RFMTA331240IMAB701
WALSIN
3.0 dBi
Metal Stamp
6 RFPCA381013IMAB701
WALSIN
4.50 dBi
PCB
7 RFPCA381035IMAB701
WALSIN
2.7
dBi PCB
8 RFA-02-3-C5H1
Aristotle
3 dBi
Dipole
9 RFA-02-5-C7H1
Aristotle
5 dBi
Dipole
-
Long
10 RFA-02-P33 Aristotle
2 dBi
PCB
11 1461530100
Molex
3 dBi
PCB/Flexi
12 RN-SMA
-S
Microchip
0.56 dBi
Dipole
-
short
13 RN-SMA
-7
Microchip
5 dBi
Dipole
-
Long
14 RFA-02-5-F7H1
Aristotle
5 dBi
Dipole
-
Long
15 RFA-02-D3 Aristotle
2 dBi
Dipole
-
no encl.
16 RFA-02-G03 Aristotle
2 dBi
Metal Stamp
17 RFA-02-L2H1
Aristotle
2 dBi
Dipole
18 RFA-02-P05 Aristotle
2 dBi
PCB
19 RFA-02-C2M2
Aristotle
2 dBi
Dipole
Regulatory Compliance Information
1.1 Antenna Considerations:
Table 1-1 provides the list of Approved antennas along with the manufacturer and part number
details.
Slno. P/N Vendor Antenna Gain @
Antenna type
1.2 ATWILC3000-MR110UA Usage Instructions under Modular Approval
Table 1-2: Features and supported modes of operation
Frequency Range
Number of Channels WiFi: 11 for North America
WiFi: 2.400 GHz ~ 2.4835 GHz (2.4 GHz ISM Band)
BT: 2.402 GHz to 2.480 GHz
BLE: 2.402 GHz to 2.480 GHz
BT/BLE: 79/ 40
The availability of some specific channels and/or operational frequency bands are country dependent and
should be programmed at the Host product factory to match the intended destination. Regulatory bodies
prohibit exposing the settings to the end user. This requirement needs to be taken care of via Host
implementation.
The Host product manufacturer must ensure that the RF behavior adheres to the certification (e.g. FCC,
ISED) requirements when the module is installed in the final Host product.
Revision 0.3 (06/2018)
Preliminary
Loading...