Microchip Technology EVK-UTC2000, UTC2000, EVB-UTC2000-UFP User Manual

UTC2000

Evaluation Kit

User’s Guide

 2015 Microchip Technology Inc. DS50002399B

Note the following details of the code protection feature on Microchip devices:

YSTEM

CERTIFIE DBYDNV

== ISO/TS16949==

• Microchip products meet the specification contained in their particular Microchip Data Sheet.

• Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.

• There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.

• Microchip is willing to work with the customer who is concerned about the integrity of their code.

• Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”

Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

Information contained in this publication regarding device applications and the like is provided only for your convenience and may be
superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO
REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE,
MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Micro­chip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold
harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or
otherwise, under any Microchip intellectual property rights unless otherwise stated.

Trademarks

The Microchip name and logo, the Microchip logo, dsPIC, FlashFlex, flexPWR, JukeBlox, K
MediaLB, MOST, MOST logo, MPLAB, OptoLyzer, PIC, PICSTART, PIC
UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.

The Embedded Control Solutions Company and mTouch are registered trademarks of Microchip Technology Incorporated in the U.S.A.

Analog-for-the-Digital Age, BodyCom, chipKIT, chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net, ECAN, In-Circuit Serial
Programming, ICSP, Inter-Chip Connectivity, KleerNet, KleerNet logo, MiWi, motorBench, MPASM, MPF, MPLAB Certified logo,
MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, RightTouch logo, REAL
ICE, SQI, Serial Quad I/O, Total Endurance, TSHARC, USBCheck, VariSense, ViewSpan, WiperLock, Wireless DNA, and ZENA are
trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.

SQTP is a service mark of Microchip Technology Incorporated in the U.S.A.

Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries.

GestIC is a registered trademark of Microchip Technology Germany II GmbH & Co. KG, a subsidiary of Microchip Technology Inc., in
other countries.

All other trademarks mentioned herein are property of their respective companies.

© 2015, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved.

ISBN: 978-1-5224-0025-7

32

logo, RightTouch, SpyNIC, SST, SST Logo, SuperFlash and

EELOQ, KEELOQ logo, Kleer, LANCheck,

QUALITYMANAGEMENTS

DS50002399B-page 2  2015 Microchip Technology Inc.

Microchip received ISO/TS-16949:2009 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.

®

MCUs and dsPIC® DSCs, KEELOQ

®

code hopping

Object of Declaration: UTC2000

 2015 Microchip Technology Inc. DS50002399B-page 3

UTC2000 Evaluation Kit User’s Guide

NOTES:

DS50002399B-page 4  2015 Microchip Technology Inc.

UTC2000

EVALUATION KIT

USER’S GUIDE

Table of Contents

Preface ........................................................................................................................... 7

Introduction............................................................................................................ 7

Document Layout EVK-UTC2000 ......................................................................... 7

Conventions Used in this Guide ............................................................................ 8

Warranty Registration............................................................................................ 9

The Microchip Website.......................................................................................... 9

Customer Support ................................................................................................. 9

Document Revision History ................................................................................. 10

Chapter 1. Overview

1.1 UTC2000 Evaluation Kit Overview and Features ......................................... 11

1.2 Features ....................................................................................................... 11

1.3 General Description ...................................................................................... 12

1.4 References ................................................................................................... 13

1.5 Definition ...................................................................................................... 13

Chapter 2. Getting Started

2.1 Contents of the Kit ........................................................................................ 15

2.2 Bring-Up and Testing ................................................................................... 15

2.2.1 Setup and Requirements ........................................................................... 15

2.2.2 EVB-UTC2000-DFP Legacy Charging Operation ..................................... 15

2.2.3 1.5A Charging Operation ........................................................................... 15

2.2.4 3.0A Charging Operation ........................................................................... 16

Chapter 3. Hardware Configuration

3.1 Hardware Description ................................................................................... 17

3.1.1 Power Source ............................................................................................ 17

3.1.2 LED Indicators for EVB-UTC2000-DFP ..................................................... 18

3.1.3 Switches on EVB-UTC2000-DFP .............................................................. 19

3.1.4 Connector Descriptions for EVB-UTC2000-DFP ....................................... 20

3.1.5 Test Points on EVB-UTC2000-DFP .......................................................... 20

3.1.6 LED Indicators for EVB-UTC2000-UFP ..................................................... 20

3.1.7 Switches on EVB-UTC2000-UFP .............................................................. 21

3.1.8 Connector Descriptions for EVB-UTC2000-UFP ....................................... 21

3.1.9 Test Points on EVB-UTC2000-UFP .......................................................... 22

Appendix A. UTC2000 Schematics

A.1 Introduction .................................................................................................. 23

Appendix B. EVK-UTC2000 BOM

B.1 Introduction .................................................................................................. 27

Appendix C. EVK-UTC2000 PCB Silk Screens

 2015 Microchip Technology Inc. DS50002399B-page 5

UTC2000 Evaluation Kit User’s Guide

C.1 Introduction .................................................................................................. 31

Worldwide Sales and Service .....................................................................................34

DS50002399B-page 6  2015 Microchip Technology Inc.

UTC2000

EVALUATION KIT

USER’S GUIDE

Preface

NOTICE TO CUSTOMERS

All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our website
(www.microchip.com) to obtain the latest documentation available.

Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.

For the most up-to-date information on development tools, see the MPLAB
Select the Help menu, and then Topics to open a list of available online help files.

®

IDE online help.

INTRODUCTION

This chapter contains general information that will be useful to know before using the
UTC2000 Evaluation Kit User’s Guide. Items discussed in this chapter include:

• Document Layout EVK-UTC2000

• Conventions Used in this Guide

• Warranty Registration

• The Microchip Website

• Customer Support

• Document Revision History

DOCUMENT LAYOUT EVK-UTC2000

This document describes how to use the UTC2000 Evaluation Kit as a demonstration
platform optimized for portable applications. The manual layout is as follows:

• Chapter 1. “Overview” – Shows a brief description of the UTC2000 Evaluation

Kit

• Chapter 2. “Getting Started” – Provides information about set-up and operation

of the UTC2000 Evaluation Kit.

• Chapter 3. “Hardware Configuration” – Includes information about the

hardware configuration of the UTC2000 Evaluation Kit.

• Appendix A. “UTC2000 Schematics”

• Appendix B. “EVK-UTC2000 BOM”

• Appendix C. “EVK-UTC2000 PCB Silk Screens”

Note: USB Type-C™ USB-C™ are trademarks of USB Implementation Forum.

 2015 Microchip Technology Inc. DS50002399B-page 7

UTC2000 Evaluation Kit User’s Guide

CONVENTIONS USED IN THIS GUIDE

This manual uses the following documentation conventions:

DOCUMENTATION CONVENTIONS

Description Represents Examples

Arial font:

Italic characters Referenced books MPLAB

Initial caps A window the Output window

Quotes A field name in a window or

Underlined, italic text with
right angle bracket

Bold characters A dialog button Click OK

N‘Rnnnn A number in verilog format,

Text in angle brackets < > A key on the keyboard Press <Enter>, <F1>

Courier New font:

Plain Courier New Sample source code #define START

Italic Courier New A variable argument file.o, where file can be

Square brackets [ ] Optional arguments mcc18 [options] file

Curly brackets and pipe
character: { | }

Ellipses... Replaces repeated text var_name [,

®

IDE User’s Guide

Emphasized text ...is the only compiler...

A dialog the Settings dialog

A menu selection select Enable Programmer

“Save project before build”

dialog

A menu path File>Save

A tab Click the Power tab

4‘b0010, 2‘hF1
where N is the total number of
digits, R is the radix and n is a
digit.

Filenames autoexec.bat

File paths c:\mcc18\h

Keywords _asm, _endasm, static

Command-line options -Opa+, -Opa-

Bit values 0, 1

Constants 0xFF, ‘A’

any valid filename

[options]

Choice of mutually exclusive
arguments; an OR selection

Represents code supplied by
user

errorlevel {0|1}

var_name...]

void main (void)

{ ...

}

DS50002399B-page 8  2015 Microchip Technology Inc.

WARRANTY REGISTRATION

Please complete the enclosed Warranty Registration Card and mail it promptly.
Sending the Warranty Registration Card entitles users to receive new product updates.
Interim software releases are available at the Microchip website.

THE MICROCHIP WEBSITE

Microchip provides online support via our website at www.microchip.com. This website
is used as a means to make files and information easily available to customers. Acces­sible by using your favorite Internet browser, the website contains the following infor­mation:

• Product Support – Data sheets and errata, application notes and sample

programs, design resources, user’s guides and hardware support documents,
latest software releases and archived software

• General Technical Support – Frequently Asked Questions (FAQs), technical

support requests, online discussion groups, Microchip consultant program
member listing

• Business of Microchip – Product selector and ordering guides, latest Microchip

press releases, listing of seminars and events, listings of Microchip sales offices,
distributors and factory representatives

Preface

CUSTOMER SUPPORT

Users of Microchip products can receive assistance through several channels:

• Distributor or Representative

• Local Sales Office

• Field Application Engineer (FAE)

• Technical Support

Customers should contact their distributor, representative or field application engineer
(FAE) for support. Local sales offices are also available to help customers. A listing of
sales offices and locations is included in the back of this document.

Technical support is available through the website at:

http://www.microchip.com/support

 2015 Microchip Technology Inc. DS50002399B-page 9

UTC2000 Evaluation Kit User’s Guide

DOCUMENT REVISION HISTORY

Revision Section/Figure/Entry Correction

DS50002399A (07-30-15) Initial Release of Document

DS50002399B (11-20-15) Section 2.1 “Contents of the

Kit”

Section 2.2.2 “EVB-UTC200

0-DFP Legacy Charging

Operation”

Section 2.2.4 “3.0A

Charging Operation”

Figure 3-3 Updated image to remove black square in middle of

Figure 3-6 Added trademark symbol to USB Type-C™.
Figure 3-7 Replaced incorrect image.
Figure 3-8 Added trademark symbol to USB Type-C™.

Appendix A. “UTC2000

Schematics”

Appendix B. “EVK-UTC2000

BOM”

Updated grammar.

Updated first paragraph to replace 56 k? with 56 kΩ.

Updated steps to reflect correct information.

the diagram.

Updated all images to remove extraneous informa­tion.

Fixed inconsistent text size.

DS50002399B-page 10  2015 Microchip Technology Inc.

EVALUATION KIT

Chapter 1. Overview

1.1 UTC2000 EVALUATION KIT OVERVIEW AND FEATURES

The UTC2000 Evaluation Kit is intended to demonstrate the form factor and reversibil­ity of the USB Type-C™ cable operation as enabled by the UTC2000 basic Type-C
controller. The kit includes a downstream facing port board, an upstream facing port
board, and a USB Type-C cable, as shown in Figure 1-1. A basic USB Type-C connec­tion can be demonstrated with a standard USB 2.0 or USB 3.1* host port, the UTC2000
EVK and any USB 2.0 or USB 3.1 device. See Section 1.2 “Features” for more infor­mation.

Note: EVK-UTC2000 is enabled with a USB 3.1 Gen 1 switch. USB 3.1 Gen 2 can

be supported by using a compliant USB 3.1 Gen 2 switch.

FIGURE 1-1: UTC2000 EVALUATION KIT

UTC2000

USER’S GUIDE

1.2 FEATURES

• EVB-UTC2000-DFP converts any USB Type-A port to a USB Type-C port

• EVB-UTC2000-UFP converts any USB device to a USB Type-C device

• Compatible with USB 2.0 and USB 3.1 host ports and devices

• Supports basic USB Type-C 5V charging at:

- Legacy 500mA (USB 2.0)/900mA (USB 3.1)

-1.5A

-3.0A

• LED status indicators on the downstream facing port (DFP) board include:

- 5V board supply indicators

- “Overcurrent” and “Fault” indicators

- Plug orientation

 2015 Microchip Technology Inc. DS50002399B-page 11