Microchip Technology Microstick II Information Sheet
Americas
Atlanta - 678-957-9614
Boston - 774-760-0087
Chicago - 630-285-0071
Cleveland - 216-447-0464
Dallas - 972-818-7423
Detroit - 248-538-2250
Indianapolis - 317-773-8323
Los Angeles - 949-462-9523
Phoenix - 480-792-7200
Santa Clara - 408-961-6444
Toronto - 905-673-0699
Europe
Austria - Wels - 43-7242-2244-39
Denmark - Copenhagen - 45-4450-2828
France - Paris - 33-1-69-53-63-20
Germany - Munich - 49-89-627-144-0
Italy - Milan - 39-0331-742611
Netherlands - Drunen - 31-416-690399
Spain - Madrid - 34-91-708-08-90
UK - Wokingham - 44-118-921-5869
Asia/Pacific
Australia - Sydney - 61-2-9868-6733
China - Beijing - 86-10-8569-2100
China - Chengdu - 86-28-8665-5511
Asia/Pacific (Continued)
China - Chongqing - 86-23-8980-9588
China - Hangzhou - 86-571-2819-3187
China - Hong Kong SAR - 852-2401-1200
China - Nanjing- 86-25-8473-2460
China - Qingdao - 86-532-8502-7355
China - Shanghai - 86-21-5407-5533
China - Shenyang - 86-24-2334-2829
China - Shenzhen - 86-755-8203-2660
China - Wuhan - 86-27-5980-5300
China - Xiamen - 86-592-2388138
China - Xian - 86-29-8833-7252
China - Zhuhai - 86-756-3210040
India - Bangalore - 91-80-3090-4444
India - New Delhi - 91-11-416 0-8631
India - Pune - 91-20-2566-1512
Japan - Yokohama - 81-45-471-6166
Korea - Daegu - 82-53-744-4301
Korea - Seoul - 82-2-554-7200
Malaysia - Kuala Lumpur - 60-3-6201-9857
Malaysia - Penang - 60-4-227-8870
Philippines - Manila - 63-2-634-9065
Singapore - 65-6334-8870
Taiwan - Hsin Chu - 886-3-6578-300
Taiwan - Kaohsiung - 886-7-213-7830
Taiwan - Taipei - 886-2-2500-6610
Thailand - Bangkok - 66-2-694-1351
08/02/11
Microchip Technology Inc. • 2355 West Chandler Blvd. • Chandler, AZ 85224-6199
www.microchip.com
The Microchip name and logo, the Microchip logo, and MPLAB are registered trademarks of Microchip Technology
Incorporated in the U.S.A. and other countries. All other trademarks mentioned herein are property of their respective
companies. © 2010-2011, Microchip Technology Incorporated, Printed in the U.S.A. All Right s Reserved. 08/11
DS51951B
*DS51951B*
Microstick II Information Sheet
The Microstick II is designed to provide an easy to use, economical development
environment for 16-bit and 32-bit microcontrollers. The board includes an integrated
debugger/programmer, a socket for the device under test and pins that facilitate
insertion into a prototyping board for extremely flexible development. Microstick II is
designed to support any 16- or 32-bit Microchip 28-pin SPDIP packaged MCU that
matches the power and debugger/programmer interface pins shown on the encl osed
schematic.
Installing MPLAB® IDE and C Compilers
MPLAB® Integrated Development Environment (IDE) should be installed prior to
using the Microstick. This board is designed to run MPLAB IDE version 8.76 or
later. While MPLAB IDE provides assembler tools for development, most of the
code examples provided for Microchip devices are written in the C language and
require a C compiler to be installed. Microchip’s MPLAB C compiler seamlessly integrates into MPLAB IDE. Both the MPLAB IDE and C compiler are free (see the note
below) and are available for download at http://www.microchip.com/MPLAB and
http://www.microchip.com/compilers, respectively.
Note: Standard Evaluation (Free) – All optimization levels are enabled for 60
days, but then revert to optimization level 1 only.
Code Examples and More Information
For code examples and more information, please visit the Microstick II product page at:
http://www.microchip.com/microstick.
Running and Debugging Applications
After downloading the code examples and installing the development tools, please use
the following procedure to build, run and debug your software:
1. If using MPLAB 8.xx IDE, do the following; otherwise, skip to step 2:
a) Select Programmer > Select Tool
b) Build the project by selecting Project > Build All
c) Download your code to the DSC or MCU by selecting Programmer > Program
2. If using MPLAB X IDE, do the following:
a) Select Run > Set Project Configuration > Customize
b) Under Hardware Tools, select Starter Kits (PKOB), and then click Apply
followed by OK.
c) Select Run > Run Project
click the Reset Release icon.
For more information on building, running and debugging your application, refe r to the
MPLAB help.
, and then choose Starter Kit on Board.
.
.
to download the code to the target device, and then
.
Microstick II Information Sheet
PGEDB
PIN11
PIN10
PIN7
PGECA
PGEDA
PIN2
PGEDB
PGEDA
PGECA
PIN16
PIN18
PIN24
PIN25
MCLR
VDD
470R
R41
2 1
S2
PIN12
PIN9
PIN6
PIN3
R39
10k
VDD
C17
0.1uF
MCLR
PGECB
PIN17
PIN26
PIN23
GND
C20
0.1uF
0.1uF
C18
PGEC_MASTER
PGEC_MASTER
VDD
PGECB
PIN22_TXD
PIN21_RXD
PIN21_RXD
PIN22_TXD
PGED_MASTER
PGED_MASTER
D6RED
LED Jumper
VDD
VCAP
C19
10uF
TP1
VDD
1
3
4
2
S1
J3
13
10
7
4
1
16
19
22
25
28
14
8
9
11
12
2
3
5
6
15
17
18
20
21
23
24
26
27
Device Socket
U5
J6
P1
Breadboard Headers
USB_D+
USB_D-
Schematics
DS51951B
Loading...