Page 1
EVB-LAN9500A-LC
Evaluation Board
User’s Guide
2014-2018 Microchip Technology Inc. DS50002241B
Page 2
Note the following details of the code protection feature on Microchip devices:
YSTEM
CERTIFIE DBYDNV
== ISO/TS16949==
• Microchip products meet the specification contained in their particular Microchip Data Sheet.
• Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
• There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
• Microchip is willing to work with the customer who is concerned about the integrity of their code.
• Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Information contained in this publication regarding device applications and the like is provided only for your convenience and may be
superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO
REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE,
MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Micro-
chip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold
harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or
otherwise, under any Microchip intellectual property rights unless otherwise stated.
Trademarks
The Microchip name and logo, the Microchip logo, AnyRate, AVR, AVR logo, AVR Freaks, BitCloud, chipKIT, chipKIT logo, CryptoMemory,
CryptoRF, dsPIC, FlashFlex, flexPWR, Heldo, JukeBlox, KeeLoq, Kleer, LANCheck, LINK MD, maXStylus, maXTouch, MediaLB, megaAVR,
MOST, MOST logo, MPLAB, OptoLyzer, PIC, picoPower, PICSTART, PIC32 logo, Prochip Designer, QTouch, SAM-BA, SpyNIC, SST, SST
Logo, SuperFlash, tinyAVR, UNI/O, and XMEGA are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other
countries.
ClockWorks, The Embedded Control Solutions Company, EtherSynch, Hyper Speed Control, HyperLight Load, IntelliMOS, mTouch, Precision
Edge, and Quiet-Wire are registered trademarks of Microchip Technology Incorporated in the U.S.A.
Adjacent Key Suppression, AKS, Analog-for-the-Digital Age, Any Capacitor, AnyIn, AnyOut, BodyCom, CodeGuard, CryptoAuthentication,
CryptoAutomotive, CryptoCompanion, CryptoController, dsPICDEM, dsPICDEM.net, Dynamic Average Matching, DAM, ECAN, EtherGREEN,
In-Circuit Serial Programming, ICSP, INICnet, Inter-Chip Connectivity, JitterBlocker, KleerNet, KleerNet logo, memBrain, Mindi, MiWi,
motorBench, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM,
PICDEM.net, PICkit, PICtail, PowerSmart, PureSilicon, QMatrix, REAL ICE, Ripple Blocker, SAM-ICE, Serial Quad I/O, SMART-I.S., SQI,
SuperSwitcher, SuperSwitcher II, Total Endurance, TSHARC, USBCheck, VariSense, ViewSpan, WiperLock, Wireless DNA, and ZENA are
trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.
SQTP is a service mark of Microchip Technology Incorporated in the U.S.A.
Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries.
GestIC is a registered trademark of Microchip Technology Germany II GmbH & Co. KG, a subsidiary of Microchip Technology Inc., in other
countries.
All other trademarks mentioned herein are property of their respective companies.
© 2018, Microchip Technology Incorporated, All Rights Reserved.
ISBN: 978-1-5224-3524-2
Microchip received ISO/TS-16949:2009 certification for its worldwide
QUALITYMANAGEMENTS
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
®
MCUs and dsPIC® DSCs, KEELOQ
®
code hopping
DS50002241B-page 2 2014-2018 Microchip Technology Inc.
Page 3
EVB-LAN9500A-LC
EVALUATION BOARD
USER’S GUIDE
Table of Contents
Preface ........................................................................................................................... 5
Introduction............................................................................................................ 5
Document Layout .................................................................................................. 5
Conventions Used in this Guide ............................................................................ 6
The Microchip Web Site ........................................................................................ 7
Development Systems Customer Change Notification Service ............................ 7
Customer Support ................................................................................................. 8
Document Revision History ................................................................................... 8
Chapter 1. Overview
1.1 Introduction ..................................................................................................... 9
1.2 References ................................................................................................... 10
Chapter 2. Getting Started
2.1 Board Details ................................................................................................ 11
2.1.1 Configuration ............................................................................................. 11
2.1.2 Mechanicals .............................................................................................. 12
Appendix A. EVB-LAN9500A-LC Evaluation Board
A.1 Introduction .................................................................................................. 13
Appendix B. Schematics
B.1 Introduction .................................................................................................. 15
Appendix C. Bill of Materials
C.1 Introduction .................................................................................................. 17
Worldwide Sales and Service .................................................................................... 18
2014-2018 Microchip Technology Inc. DS50002241B-page 3
Page 4
EVB-LAN9500A-LC Evaluation Board User’s Guide
NOTES:
DS50002241B-page 4 2014-2018 Microchip Technology Inc.
Page 5
EVB-LAN9500A-LC
EVALUATION BOARD
USER’S GUIDE
Preface
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB
Select the Help menu, and then Topics to open a list of available online help files.
®
IDE online help.
INTRODUCTION
This chapter contains general information that will be useful to know before using the
EVB-LAN9500A-LC Evaluation Board. Items discussed in this chapter include:
• Document Layout
• Conventions Used in this Guide
• The Microchip Web Site
• Development Systems Customer Change Notification Service
• Customer Support
• Document Revision History
DOCUMENT LAYOUT
This document describes how to use the EVB-LAN9500A-LC Evaluation Board as a
high-performance and low-cost USB/Ethernet connectivity solution.
The manual layout is as follows:
• Chapter 1. “Overview” – Shows a brief description of the EVB-LAN9500A-LC
Evaluation Board.
• Chapter 2. “Getting Started” – Includes information about the
EVB-LAN9500A-LC Evaluation Board.
• Appendix A. “EVB-LAN9500A-LC Evaluation Board” – This appendix shows
the EVB-LAN9500A-LC Evaluation Board.
• Appendix B. “Schematics” – This appendix shows the EVB-LAN9500A-LC
Evaluation Board schematic.
• Appendix C. “Bill of Materials” – This appendix includes the
EVB-LAN9500A-LC Evaluation Board Bill of Materials (BOM).
2014-2018 Microchip Technology Inc. DS50002241B-page 5
Page 6
EVB-LAN9500A-LC Evaluation Board User’s Guide
CONVENTIONS USED IN THIS GUIDE
This manual uses the following documentation conventions:
DOCUMENTATION CONVENTIONS
Description Represents Examples
Arial font:
Italic characters Referenced books MPLAB
Emphasized text ...is the only compiler...
Initial caps A window the Output window
A dialog the Settings dialog
A menu selection select Enable Programmer
Quotes A field name in a window or
dialog
Underlined, italic text with
right angle bracket
Bold characters A dialog button Click OK
N‘Rnnnn A number in verilog format,
Text in angle brackets < > A key on the keyboard Press <Enter>, <F1>
Courier New font:
Plain Courier New Sample source code #define START
Italic Courier New A variable argument file.o, where file can be
Square brackets [ ] Optional arguments mcc18 [options] file
Curly brackets and pipe
character: { | }
Ellipses... Replaces repeated text var_name [,
A menu path File>Save
A tab Click the Power tab
where N is the total number of
digits, R is the radix and n is a
digit.
Filenames autoexec.bat
File paths c:\mcc18\h
Keywords _asm, _endasm, static
Command-line options -Opa+, -Opa-
Bit values 0, 1
Constants 0xFF, ‘A’
Choice of mutually exclusive
arguments; an OR selection
Represents code supplied by
user
®
IDE User’s Guide
“Save project before build”
4‘b0010, 2‘hF1
any valid filename
[options]
errorlevel {0|1}
var_name...]
void main (void)
{ ...
}
DS50002241B-page 6 2014-2018 Microchip Technology Inc.
Page 7
Preface
THE MICROCHIP WEB SITE
Microchip provides online support via our web site at www.microchip.com. This web
site is used as a means to make files and information easily available to customers.
Accessible by using your favorite Internet browser, the web site contains the following
information:
• Product Support – Data sheets and errata, application notes and sample
programs, design resources, user’s guides and hardware support documents,
latest software releases and archived software
• General Technical Support – Frequently Asked Questions (FAQs), technical
support requests, online discussion groups, Microchip consultant program
member listing
• Business of Microchip – Product selector and ordering guides, latest Microchip
press releases, listing of seminars and events, listings of Microchip sales offices,
distributors and factory representatives
DEVELOPMENT SYSTEMS CUSTOMER CHANGE NOTIFICATION SERVICE
Microchip’s customer notification service helps keep customers current on Microchip
products. Subscribers will receive e-mail notification whenever there are changes,
updates, revisions or errata related to a specified product family or development tool
of interest.
To register, access the Microchip web site at www.microchip.com, click on Customer
Change Notification and follow the registration instructions.
The Development Systems product group categories are:
• Compilers – The latest information on Microchip C compilers, assemblers, linkers
and other language tools. These include all MPLAB C compilers; all MPLAB
assemblers (including MPASM assembler); all MPLAB linkers (including MPLINK
object linker); and all MPLAB librarians (including MPLIB object librarian).
• Emulators – The latest information on Microchip in-circuit emulators.This
includes the MPLAB REAL ICE and MPLAB ICE 2000 in-circuit emulators.
• In-Circuit Debuggers – The latest information on the Microchip in-circuit
debuggers. This includes MPLAB ICD 3 in-circuit debuggers and PICkit 3 debug
express.
• MPLAB IDE – The latest information on Microchip MPLAB IDE, the Windows
Integrated Development Environment for development systems tools. This list is
focused on the MPLAB IDE, MPLAB IDE Project Manager, MPLAB Editor and
MPLAB SIM simulator, as well as general editing and debugging features.
• Programmers – The latest information on Microchip programmers. These include
production programmers such as MPLAB REAL ICE in-circuit emulator, MPLAB
ICD 3 in-circuit debugger and MPLAB PM3 device programmers. Also included
are nonproduction development programmers such as PICSTART Plus and
PIC-kit 2 and 3.
2014-2018 Microchip Technology Inc. DS50002241B-page 7
Page 8
EVB-LAN9500A-LC Evaluation Board User’s Guide
CUSTOMER SUPPORT
Users of Microchip products can receive assistance through several channels:
• Distributor or Representative
• Local Sales Office
• Field Application Engineer (FAE)
• Technical Support
Customers should contact their distributor, representative or field application engineer
(FAE) for support. Local sales offices are also available to help customers. A listing of
sales offices and locations is included in the back of this document.
Technical support is available through the web site at:
http://www.microchip.com/support
DOCUMENT REVISION HISTORY
Revisions Section/Figure/Entry Correction
DS50002241B
(09-12-18)
DS50002241A
(01-18-14)
Figure 2-1 and Figure A-1 Updated and made changes to the board.
Figure 2-2 Updated the figure.
Figure B-1 Updated the schematics diagram.
Table C-1 Updated the Bill of Materials section.
Section 1.2 “References” Moved the References section to Chapter
All Made minor text changes throughout.
Initial release
1 and removed the Appendix D. References section.
DS50002241B-page 8 2014-2018 Microchip Technology Inc.
Page 9
1.1 INTRODUCTION
Microchip
LAN9500A
EVB-LAN9500A-LC
256 x 8
μWire
EEPROM
RJ45
Ethernet
10/100
Ethernet
Magnetics
USB Type-A
Connector
USB
The LAN9500A is a high-performance, small form factor solution for USB to 10/100
Ethernet port bridging. With applications ranging from embedded systems, set-top
boxes, and PVRs, to USB port replicators, USB to Ethernet adapters, PC docking
stations, and test instrumentation, the LAN9500A is targeted as a high-performance
and low-cost USB/Ethernet connectivity solution.
The LAN9500A contains an integrated 10/100 Ethernet PHY, USB PHY, Hi-Speed USB
2.0 device controller, 10/100 Ethernet MAC, TAP controller, EEPROM controller, and a
FIFO controller with a total of 30 KB of internal packet buffering. The LAN9500A
complies with the IEEE 802.3 (full-/half-duplex 10BASE-T and 100BASE-TX) Ethernet
protocol and USB 2.0 specification, enabling compatibility with industry standard Fast
Ethernet and USB 2.0 applications.
The EVB-LAN9500A-LC is an evaluation board that utilizes the LAN9500A to provide
a fully-functional, bus-powered USB to Ethernet interface. The EVB-LAN9500A-LC
provides fully-integrated Ethernet and USB ports via the on-board RJ45 and USB
Type-A connectors. The on-board 256x8 EEPROM is used to load the
EVB-LAN9500A-LC’s USB configuration parameters and MAC address.
LAN95xx software drivers are available for Windows
®
Linux
, and Windows CE. Additional manufacturing and diagnostic tools are available
for debugging and external EEPROM configuration. For complete details, refer to the
LAN95xx Software User Manual.
Note: For additional support about the EVB-LAN9500A-LC, contact Microchip's
A simplified block diagram of the EVB-LAN9500A-LC is illustrated in Figure 1-1.
EVB-LAN9500A-LC
EVALUATION BOARD
USER’S GUIDE
Chapter 1. Overview
®
XP, Wind ows Vista , Mac® OS X,
Embedded Solution Engineer (ESE) or refer to Microchip's LANCheck
Online Design Review.
2014-2018 Microchip Technology Inc. DS50002241B-page 9
FIGURE 1-1: EVB-LAN9500A-LC BLOCK DIAGRAM
Page 10
EVB-LAN9500A-LC Evaluation Board User’s Guide
1.2 REFERENCES
Concepts and materials available in the following documents may be helpful when
reading this document. Visit www.microchip.com for the latest documentation.
• LAN9500A Data Sheet
• AN 8.13 Suggested Magnetics
• EVB-LAN9500A-LC Evaluation Board Schematic
• LAN95xx Software User Manual
DS50002241B-page 10 2014-2018 Microchip Technology Inc.
Page 11
2.1 BOARD DETAILS
Microchip
LAN9500A
GND
Test Point
Microchip
3.3V Voltage
Regulator
USB Type-A
Connector
Ethernet Port
(integrated
LEDs)
Ethernet
Magnetics
Microchip
256 x 8
EEPROM
Microchip
25MHz
Oscillator
Microchip
Reset Supervisor
Bottom Side
This section includes the following EVB-LAN9500A-LC board details:
• Configuration
• Mechanicals
2.1.1 Configuration
The following sub-sections describe the various board features including LEDs, test
points, and system connections. A top view of the EVB-LAN9500A-LC is shown in
Figure 2-1.
FIGURE 2-1: EVB-LAN9500A-LC TOP VIEW
EVB-LAN9500A-LC
EVALUATION BOARD
USER’S GUIDE
Chapter 2. Getting Started
2014-2018 Microchip Technology Inc. DS50002241B-page 11
Page 12
EVB-LAN9500A-LC Evaluation Board User’s Guide
2.120
1.000
Ø 0.080 Ø 0.080
Ø 0.080Ø 0.080
0.070
0.070
0.070
0.070
0.070
0.070
0.070
0.070
2.1.1.1 LEDS
Ta bl e 2 -1 describes the EVB-LAN9500A-LC LEDs.
TABLE 2-1: LEDS
References Color Indication
Green Ethernet Link/Activity
Solid: Link established
Blinking: Link activity
J2
Yellow Ethernet Speed
2.1.1.2 TEST POINTS
Ta bl e 2 -2 describes the EVB-LAN9500A-LC test point.
TABLE 2-2: TEST POINTS
Test Point Description Connection
TP2 Single Pin Gold Post GND Test Point GND
OFF: No link
ON: 100BASE-TX
OFF: 10BASE-T
2.1.1.3 SYSTEM CONNECTIONS
Ta bl e 2 -3 describes the EVB-LAN9500A-LC system connections.
TABLE 2-3: SYSTEM CONNECTIONS
Plug/Header Description Part
P1 USB Type-A Plug Molex
®
48037-0001
J2 RJ45 with Integrated LEDs Amphenol® RJHSE-5281
2.1.2 Mechanicals
Figure 2-2 shows the EVB-LAN9500A-LC mechanical dimensions in detail.
FIGURE 2-2: EVB-LAN9500A-LC MECHANICALS
DS50002241B-page 12 2014-2018 Microchip Technology Inc.
Page 13
Appendix A. EVB-LAN9500A-LC Evaluation Board
A.1 INTRODUCTION
This appendix shows the EVB-LAN9500A-LC Evaluation Board.
FIGURE A-1: EVB-LAN9500A-LC EVALUATION BOARD
EVB-LAN9500A-LC
EVALUATION BOARD
USER’S GUIDE
2014-2018 Microchip Technology Inc. DS50002241B-page 13
Page 14
EVB-LAN9500A-LC Evaluation Board User’s Guide
NOTES:
DS50002241B-page 14 2014-2018 Microchip Technology Inc.
Page 15
EVALUATION BOARD
Appendix B. Schematics
B.1 INTRODUCTION
This appendix shows the EVB-LAN9500A-LC Evaluation Board schematic.
EVB-LAN9500A-LC
USER’S GUIDE
2014-2018 Microchip Technology Inc. DS50002241B-page 15
Page 16
DS50002241B-page 16 2014-2018 Microchip Technology Inc.
1
1
2
2
3
3
4
4
5
5
6
6
D D
C C
B B
A A
Page Title:
Project Name:
EVB-LAN9500A 10/100 USB to Ethernet Dongle
EVB-LAN9500A-LC
PN:
03-10844
Description:
Date:Size: Sheet of Rev
C221
3/29/2018
Designer:
Arnaldo Cruz
LAN9500A Evaluation Board Dongle
Designed with
Microchip Technology, Inc.
USB/Network Group - UNG
www.Microchip.com
Altium.com
TD_P
TD_N
RD_P
RD_N
EECLK/PWR_SEL
EEDI
EEDO/AUTOMDIX_EN
USBD_N
USBD_P
EEDO/AUTOMDIX_EN
TX_N
USBD_N
RX_N
EECLK/PWR_SEL
nLNKA_LED/GPIO9
VBUS_DET
nRESET
RX_P
EEDO/AUTOMDIX_EN
nSPD_LED/GPIO10
nRESET
USBD_P
EEDI
TX_P
EECS
EECS
nFDX_LED/GPIO8
VDD33A
VDDPLL
VDDUSBPLL
VDDCORE
+3.3V
VDD33A
+3.3V
+5V
+3.3V
VDDCORE
VDDPLL
+3.3V VDD33A VDDUSBPLLVDDCORE
+3.3V
+3.3V
+3.3V
+3.3V
+5VVCC_USB
GND_USB
+3.3V
+3.3V
+3.3V
GND_CHASSIS
+3.3V
+3.3V
127(
3ODFH 2KPUHVLVWRUVQHDU /$1/$1$
3ODFH 2KP 2KPUHVLVWRU QHDUWUDQVIRUPHUV
Power Supply Filtering
uWire EEPROM
USB Connector
+3.3V Regulator
LAN9500 / LAN9500A Ethernet
Optional Reset Monitor
FDX
LNKA
SPD
AUTO_MDIX disable optional strap.
12.4K Ohm 1%
LAN9500A *
R6
LAN9500
12.0K Ohm 1%
Device
GND Test Point
* Default Configuration
* Default Configuration
LAN9500
Device
0 Ohm
10 Ohm 1%
R4
LAN9500A *
VIN
1
GND
2
VOUT
3
MCP1825S/3.3V
VR1
VDD
3
GND
1
RST
2
MIC803/2.93V
ResetPulseWidthMin: 1120msec
DNP
U3
10M
R13
10M
R22
1M
DNP
R26
BLUE
DNP
LED2
BLUE
DNP
LED1
VBUS
1
GND
4
D-
2
D+
3
VBUS
G
-
0
USB2.0 STD-A MALE
P1
120R
FB4
120R
FB2
120R
FB1
120R
FB3
0.1uFC80.1uF
C9
0.1uF
C16
0.1uF
C17
0.1uF
C18
0.1uF
C22
0.1uF
C7
0.1uF
C13
0.1uF
C14
4700pF
C10
4700pF
C19
4700pF
C20
4700pF
C24
4700pF
C12
4700pF
C26
4700pF
C2
4700pF
C23
1500pF
C28
1500pF
C21
1500pF
C11
0.022uF
C1
1uF
C15
1uF
C27
+3.3V
0.1uF
C29
25MHz
1000pF
2KV
C3
1000pF
2KV
C4
GND_CHASSIS
GND_CHASSIS
STB
1
GND
2
OUT
3
VDD
4
25Mhz
Y1
10pF
DNP
C6
Oscillator* Crystal
LAN9500A
* Default Configuration
DNP
LAN9500 1M Ohm 1%
DNPR26
R14
R16
R15
R17
DNP
33R 0R
0R DNP
DNP 0R
0R
C5C6DNP
DNP
10pF
10pF
DSC1001CI1-025.000 ABM8G-25.000MHZ-4Y-T3
C29 DNP0.1uF
10pF
DNP
C5
49.9R
R1
0R
R4
0R
R7
0R
DNP
R17
0R
DNP
R14
0R
R16
10k
R25
10k
R24
10k
DNP
R18
12k
R6
12k
R8
75RR975R
R10
75R
R11
75R
R12
330R
DNP
R23
330R
R30
12
330R
R28
33R
R15
J2_DC_P
J2_DC_M
J2_DD_M
J2_DD_P
49.9RR249.9RR349.9R
R5
12
330R
R29
4.7uF
C25
TD+
1
TD-
2
TDCT
3
TX+
16
TXCT
14
TX-
15
RX-
9
RX+
10
RXCT
11
RD-
8
RDCT
6
RD+
7
NC3
13
NC1
4
NC2
5
NC4
12
10/100/1000 XFMR
T1
EECS
30
EEDO/AUTOMDIX_EN
31
EECLK/PWR_SEL
29
TXN
2
TXP
3
RXN
5
RXP
6
VDD33IO
51
EXRES
8
nPHY_INT
1
TXEN
43
RXER
44
RXCLK
41
RXDV
42
MDIO/GPIO1
23
MDC/GPIO2
22
CRS/GPIO3
45
COL/GPIO0
46
TXD3/GPIO7/EEP_SIZE
53
TXD2/GPIO6/PORT_SWAP
54
TXD1/GPIO5/RMT_WKP
55
TXD0/GPIO4/EEP_DISABLE
56
TXCLK
47
TEST2
13
PHY_SEL
34
VBUS_DET
20
VDD33A
4
VDD33A/NC
7
nRESET
24
TCK/RXD1
38
TMS/RXD2
39
nTRST/RXD0
36
TDO/nPHY_RST
37
TDI/RXD3
40
VDDPLL
10
VDD33A
9
VDD33IO
25
VDDCORE
50
VDD33IO48VDD33IO
52
VDDCORE
21
EEDI
32
VSS (Epad)
57
XO
19
XI
18
VDDUSBPLL
17
USBRBIAS
16
VDD33A
15
USBDP
12
USBDM
11
nSPD_LED/GPIO10
28
nLNKA_LED/GPIO9
27
nFDX_LED/GPIO8
26
NC
14
TEST3
33
VDD33IO
35
TEST1
49
LAN9500A USB LAN Controller
U1
TP1
TP2
FID1 FID2 FID3
FID4 FID5 FID6
i Top Layer
3
i Bottom Layer
FID4
FID5
6
Fiducials
LABEL1
MH1
Mounting Holes
MH2 MH3 MH4
"GPIO2"
"FDX/GPIO8"
GA
10
SHIELD
0
YA
12
GC
9
YC
11
GREEN
YELLOW
DA_P
1
DA_M
2
DB_P
3
DC_P
4
DC_M
5
DB_M
6
DD_P
7
DD_M
8
MODULAR RJ45
J2
DI
3
DO
1
GND
2
VCC
6
CS
5
CLK
4
93AA56AT
U2
FIGURE B-1: EVB-LAN9500A-LC EVALUATION BOARD SCHEMATIC
EVB-LAN9500A-LC Evaluation Board User’s Guide
D
D+
ND
FID1FID2FID
FID
Page 17
EVB-LAN9500A-LC
EVALUATION BOARD
USER’S GUIDE
Appendix C. Bill of Materials
C.1 INTRODUCTION
This appendix includes the EVB-LAN9500A-LC Evaluation Board Bill of Materials (BOM).
TABLE C-1: EVB-LAN9500A-LC EVALUATION BOARD BILL OF MATERIALS
Item Qty Designator Value Manufacturer Part Number
1 1 C1 0.022uF Panasonic ECJ-2VB1H223K
2 8 C2, C10, C12, C19, C20,
C23, C24, C26
3 2 C3, C4 1000pF Johanson Dielectrics Inc 202R18W102KV4E
4 2 C5, C6 10pF Murata GRM1555C1H100JZ01D
5 10 C7, C8, C9, C13, C14,
C16, C17, C18, C22, C29
6 3 C11, C21, C28 1500pF TDK Corporation CGA2B2X7R1H152K050B
7 2 C15, C27 1uF AVX 0603YD105KAT2A
8 1 C25 4.7uF TDK Corporation C1608X5R1C475K080AC
9 4 FB1, FB2, FB3, FB4 120R TDK Corporation MMZ1608B121CTAH0
10 1 J2 MODULAR RJ45 Amphenol RJHSE-5381
11 2 LED1, LED2 BLUE Lite-On LTST-C193TBKT-5A
12 1 P1 USB2.0 STD-A MALE Molex Inc 480370001
13 4 R1, R2, R3, R5 49.9R Rohm Semiconductor MCR01MRTF49R9
14 3 R4, R7, R16 0R Yageo RC0402JR-070RL
15 2 R6, R8 12k Rohm Semiconductor MCR01MZPF1202
16 4 R9, R10, R11, R12 75R Yageo RC0402FR-0775RL
17 2 R13, R22 10M Vishay CRCW060310M0FKEA
18 2 R14, R17 0R Yageo RC0402JR-070RL
19 1 R15 33R Rohm Semiconductor MCR01MRTF33R0
20 1 R18 10k Panasonic ERJ-2RKF1002X
21 1 R23 330R Yageo RC0402FR-07330RL
22 2 R24, R25 10k Panasonic ERJ-2RKF1002X
23 1 R26 1M Panasonic ERJ-3EKF1004V
24 3 R28, R29, R30 330R Yageo RC0402FR-07330RL
25 1 T1 10/100/1000 XFMR Wurth Electronics Inc. 749020100/749020100A
26 1 U1 LAN9500A USB-LAN Microchip Technology LAN9500AI-ABZJ-TR
27 1 U2 93AA56AT Microchip Technology 93AA56AT-I/OT
28 1 U3 MIC803/2.93V Microchip Technology MIC803-29D4VM3-TR
29 1 VR1 MCP1825S/3.3V Microchip MCP1825ST-3302E/DB
30 1 Y1 25Mhz Microchip Technology DSC1001CI1-025.0000
4700pF Murata Electronics GRM155R71H472KA01J
0.1uF Murata GRM155R71C104KA88D
A
Note 1: Parts in gray rows are not fitted.
2014-2018 Microchip Technology Inc. DS50002241B-page 17
Page 18
Worldwide Sales and Service
AMERICAS
Corporate Office
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200
Fax: 480-792-7277
Technical Support:
http://www.microchip.com/
support
Web Address:
www.microchip.com
Atlanta
Duluth, GA
Tel: 678-957-9614
Fax: 678-957-1455
Austin, TX
Tel: 512-257-3370
Boston
Westborough, MA
Tel: 774-760-0087
Fax: 774-760-0088
Chicago
Itasca, IL
Tel: 630-285-0071
Fax: 630-285-0075
Dallas
Addison, TX
Tel: 972-818-7423
Fax: 972-818-2924
Detroit
Novi, MI
Tel: 248-848-4000
Houston, TX
Tel: 281-894-5983
Indianapolis
Noblesville, IN
Tel: 317-773-8323
Fax: 317-773-5453
Tel: 317-536-2380
Los Angeles
Mission Viejo, CA
Tel: 949-462-9523
Fax: 949-462-9608
Tel: 951-273-7800
Raleigh, NC
Tel: 919-844-7510
New York, NY
Tel: 631-435-6000
San Jose, CA
Tel: 408-735-9110
Tel: 408-436-4270
Canada - Toronto
Tel: 905-695-1980
Fax: 905-695-2078
ASIA/PACIFIC
Australia - Sydney
Tel: 61-2-9868-6733
China - Beijing
Tel: 86-10-8569-7000
China - Chengdu
Tel: 86-28-8665-5511
China - Chongqing
Tel: 86-23-8980-9588
China - Dongguan
Tel: 86-769-8702-9880
China - Guangzhou
Tel: 86-20-8755-8029
China - Hangzhou
Tel: 86-571-8792-8115
China - Hong Kong SAR
Tel: 852-2943-5100
China - Nanjing
Tel: 86-25-8473-2460
China - Qingdao
Tel: 86-532-8502-7355
China - Shanghai
Tel: 86-21-3326-8000
China - Shenyang
Tel: 86-24-2334-2829
China - Shenzhen
Tel: 86-755-8864-2200
China - Suzhou
Tel: 86-186-6233-1526
China - Wuhan
Tel: 86-27-5980-5300
China - Xian
Tel: 86-29-8833-7252
China - Xiamen
Tel: 86-592-2388138
China - Zhuhai
Tel: 86-756-3210040
ASIA/PACIFIC
India - Bangalore
Tel: 91-80-3090-4444
India - New Delhi
Tel: 91-11-4160-8631
India - Pune
Tel: 91-20-4121-0141
Japan - Osaka
Tel: 81-6-6152-7160
Japan - Tokyo
Tel: 81-3-6880- 3770
Korea - Daegu
Tel: 82-53-744-4301
Korea - Seoul
Tel: 82-2-554-7200
Malaysia - Kuala Lumpur
Tel: 60-3-7651-7906
Malaysia - Penang
Tel: 60-4-227-8870
Philippines - Manila
Tel: 63-2-634-9065
Singapore
Tel: 65-6334-8870
Taiwan - Hsin Chu
Tel: 886-3-577-8366
Taiwan - Kaohsiung
Tel: 886-7-213-7830
Taiwan - Taipei
Tel: 886-2-2508-8600
Thailand - Bangkok
Tel: 66-2-694-1351
Vietnam - Ho Chi Minh
Tel: 84-28-5448-2100
EUROPE
Austria - Wels
Tel: 43-7242-2244-39
Fax: 43-7242-2244-393
Denmark - Copenhagen
Tel: 45-4450-2828
Fax: 45-4485-2829
Finland - Espoo
Tel: 358-9-4520-820
France - Paris
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79
Germany - Garching
Tel: 49-8931-9700
Germany - Haan
Tel: 49-2129-3766400
Germany - Heilbronn
Tel: 49-7131-67-3636
Germany - Karlsruhe
Tel: 49-721-625370
Germany - Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-144-44
Germany - Rosenheim
Tel: 49-8031-354-560
Israel - Ra’anana
Tel: 972-9-744-7705
Italy - Milan
Tel: 39-0331-742611
Fax: 39-0331-466781
Italy - Padova
Tel: 39-049-7625286
Netherlands - Drunen
Tel: 31-416-690399
Fax: 31-416-690340
Norway - Trondheim
Tel: 47-7288-4388
Poland - Warsaw
Tel: 48-22-3325737
Romania - Bucharest
Tel: 40-21-407-87-50
Spain - Madrid
Tel: 34-91-708-08-90
Fax: 34-91-708-08-91
Sweden - Gothenberg
Tel: 46-31-704-60-40
Sweden - Stockholm
Tel: 46-8-5090-4654
UK - Wokingham
Tel: 44-118-921-5800
Fax: 44-118-921-5820
DS50002241B-page 18 2014-2018 Microchip Technology Inc.
08/15/18
Loading...