Micrel SY10EL52, SY100EL52 User Manual

Micrel, Inc.

DIFFERENTIAL DATA AND
CLOCK D FLIP-FLOP

SY10EL52

SY100EL52

SY10EL52

SY100EL52

FEATURES

■ 365ps propagation delay

■ 2.0GHz toggle frequency

■ Internal 75kΩ input pull-down resistors

■ Available in 8-pin SOIC package

PIN NAMES

Pin Function

D Data Input
CLK Clock Input
Q Data Output

DESCRIPTION

The SY10/100EL52 are differential data, differential
clock D flip-flops. These devices are functionally
equivalent to the E452 devices, with higher performance
capabilities. With propagation delays and output transition
times significantly faster than the E452, the EL52 is ideally
suited for those applications which require the ultimate
in AC performance.

Data enters the master portion of the flip-flop when
the clock is LOW and is transferred to the slave, and
thus the outputs, upon a positive transition of the clock.
The differential clock inputs also allow the EL52 to be
used as a negative edge triggered device.

The EL52 employs input clamping circuitry so that,
under open input conditions (pulled down to VEE), the
outputs of the device will remain stable.

TRUTH TABLE

D CLK Q

LZL

HZH

NOTE:

1. Z = LOW-to-HIGH transition.

(1)

M9999-121205
[e-mail] or [phone]

1

Rev.: H Amendment: /0
Issue Date:

December 2005

Micrel, Inc.

PACKAGE/ORDERING INFORMATION

SY10EL52

SY100EL52

1

DVCC

2

D

3

45

CLK

D

Flip-Flop

8

7

Q

6

QCLK

EE

V

8-Pin SOIC (Z8-1)

Ordering Information

(1)

Package Operating Package Lead

Part Number Type Range Marking Finish

SY10EL52ZC Z8-1 Commercial HEL52 Sn-Pb
SY10EL52ZCTR

(2)

Z8-1 Commercial HEL52 Sn-Pb
SY100EL52ZC Z8-1 Commercial XEL52 Sn-Pb
SY100EL52ZCTR

(2)

Z8-1 Commercial XEL52 Sn-Pb
SY10EL52ZI Z8-1 Industrial HEL52 Sn-Pb
SY10EL52ZITR

(2)

Z8-1 Industrial HEL52 Sn-Pb
SY100EL52ZI Z8-1 Industrial XEL52 Sn-Pb

(3)

(2)

Z8-1 Industrial XEL52 Sn-Pb

Z8-1 Industrial HEL52 with Pb-Free

SY100EL52ZITR
SY10EL52ZG

Pb-Free bar-line indicator NiPdAu

SY10EL52ZGTR

(2, 3)

Z8-1 Industrial HEL52 with Pb-Free

Pb-Free bar-line indicator NiPdAu

SY100EL52ZG

(3)

Z8-1 Industrial XEL52 with Pb-Free

Pb-Free bar-line indicator NiPdAu

SY100EL52ZGTR

(2, 3)

Z8-1 Industrial XEL52 with Pb-Free

Pb-Free bar-line indicator NiPdAu

Notes:

1. Contact factory for die availability. Dice are guaranteed at TA = 25°C, DC Electricals only.

2. Tape and Reel.

3. Pb-Free package is recommended for new designs.

M9999-121205
[e-mail] or [phone]

2