Micom 2BT Owner's Manual

MICOM-2BT

MICOM-2BT

MICOM-2BTMICOM-2BT

Trunk Mount

Trunk Mount

Trunk MountTrunk Mount

HF-SSB Transceiver

HF-SSB Transceiver

HF-SSB TransceiverHF-SSB Transceiver

Trunk Mount Installation Instructions

68MB000006

Supplement to MICOM-2

HF-SSB Transceiver

Owner’s Manual

68P02941C60-O

MICOM-2BT Trunk Mount Installation

General

This document describes installation of the MICOM-2BT radio in the trunk of a
vehicle. The instructions cover only aspects which are specific to trunk
installation. All other installation instructions are in the Installation section on
pages 25-33 of the MICOM-2 HF-SSB Transceiver Owner’s Manual
(68P02941C60-O). Before proceeding with your installation, read this section in
its entirety.

The MICOM-2BT trunk mount model uses a control head, speaker and
microphone in the passenger compartment, while all other radio components are
installed in the trunk of the vehicle.

Figure 1: MICOM-2BT Control Head

Model Complements

FMN1615A Hand microphone

FKN4345A DC cable

FLN2813A Control head unit base

FLN2413B Low RF assembly

FLN2419A Radio blank panel

FLN2502A High power unit

HKN6098A Control cable O/C

HLN6615A Remote trunion mounting kit

S135AD Digital noise blanker

0102703K65 RSS programming cable

FBN5799A Packing

HSN4027A 8 Ω 5 1/2" external speaker

FLN2272A Mobile mounting kit

54MB000002 Danger Programming Instructions

68MB000006 Trunk Mount Installation Instructions

6802941C60 MICOM-2 HF-SSB Transceiver Owner’s Manual

1