Page 1
Mounting Instructions
Frequently
Instructions
Your Michael Healy doorbell ringer is designed to
quickly and easily replace your existing doorbell.
1. Turn off the power to your
existing doorbell. Remove your
current doorbell button and
disconnect the two wires.
1.
2. Using the supplied screw,
attach your new mounting
bracket to the doorjamb pulling
the wires through the large
buttonhole in the mounting
bracket. (Note: Some designs
require the removal of the body
of the doorbell ringer from the
2.
mounting bracket before the
bracket can be attached to the
wall. The body is attached to the
mounting bracket with a single
screw.)
3. Attach one wire to each
terminal on the new doorbell
3.
button and push the button into
the mounting bracket. (Note: It
does not matter which wire is
attached to which terminal)
4. If required, reattach the body
of the doorbell to the mounting
bracket and return power to the
4.
doorbell.
Asked Questions
Does my doorbell ringer require special care?
We coat each doorbell ringer with a clear,
catalyzed polyurethane. This protective nish is
similar to the clear top coat on an automobile.
Washing of your doorbell ringer with a mild soap
and water will help to maintain its vibrant shine.
Occasionally coating the doorbell ringer with
car wax will greatly extend the life of the original
nish. Do not use a brass cleaner or an abrasive
pad as these will damage the clear coating and
the original polished nish.
I live near the beach. Will one nish last longer
than the others?
All Michael Healy Doorbell Ringers receive the
same protective coating. If properly cared for,
there will be little dierence in the durability of
the various nishes.
What can I do if my doorbell ringer tarnishes?
Even though Michael Healy Doorbell Ringers
are coated with a clear catalyzed, polyurethane
nish, copper alloys will patina with time.
Age and the environment may change the
appearance of your doorbell ringer. While some
prefer this natural aging process, our renishing
program gives you the option of restoring your
doorbell ringer to look like new. Simply ask
about our renishing program.
www.michaelhealy.com
Loading...