MI XPrint User manual

Portable printer XPrint™

User`s manual

Settings

01. Install the APP

Scan the QR code, or download from the App store and

download the mobile app XPrint ™.

02. Turn on printer

Press and hold the power button to turn on the printer..

For transportation safety, the battery is not fully

charged. After turning on, you need to charge the

device, according to prompts in the mobile application.

To charge,
connect the Micro USB
cable to the power source, and plug it into
recharging slot on the back of the printer.
When fully charged, the charging
indicator will glow green.
Charge approximately 1 hour *, using the
charger 5В⎓2А 10W.
* Data obtained under laboratory
conditions, depending on your
conditions, the charging time may be

different.

XIAOMI-MI.COM

03. Connect to printer

Connection method 1: Android-powered mobile phone with NFC support.

1. Enable the NFC feature on your mobile phone,

2. Put the mobile phone on the printer to automatically connect to printer.

If you can not connect to the printer, make sure that the NFC module

of the mobile phone is in the zone above the XPRINT logo and try

again.

NFC reading zone

Connection method 2: mobile phone based on Android OS or iPhone with
Bluetooth support.

1) Go to your mobile phone settings, turn on Bluetooth.

2) Update the list of Bluetooth devices, select

3) Confirm pairing to complete the connection.

Start printing, using mobile APP!

* To save battery power, the printer will automatically turn off after 10 minutes
in standby mode.
* The photo will go in and out 5 times, for printing in separate colors and
lamination. Do not pull paper out of the printer until a message appears in the
mobile application, that the printing is complete.
Do not reuse photo paper. Reuse may damage the mechanism.

XPrint-XXXX.

XIAOMI-MI.COM

* As a gift to the device is a removable tray for printing with 9 sheets of photo

Name

Portable printer XPrint™

Model

DMP 100

Weight

268 g (w/o packaging )

Input voltage

5V⎓2А

Connection method

Bluetooth

Printing method

Sublimation printing

Printing dimensions

2*3 inch (54*86 mm)

Image format

JPEG, PNG

Harmful substances

Mechanism

○ ○ ○ ○ ○

○

Circuit
board

Housing

○ ○ ○ ○ ○

○

This table is created according to the provisions of the

paper.

Main Parameters

Before using the product, read the user's manual carefully and keep it properly

Name and content of harmful substances in the product

Name of

component

(Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE)

○ ○ ○ ○ ○ ○

standard GB/T 26572.

○: the content of harmful substance in all homogeneous

materials of the component is within the requirements
of the standard GB / T 26572.

×: at least one of the homogeneous materials of the

component exceeds the limits of the requirements of the
standard GB / T 26572.

XIAOMI-MI.COM

Overview

XIAOMI-MI.COM

Micro USB Cable x 1 Removable print cartridge x 1

Changing of printing tray

1) Open the print-cartridge door bay;

2) Obtain a used removable print cartridge;

3) Insert a new removable print cartridge.

Do not open the removable print
cartridge and do not reuse a photo paper.

4) Close the door of the removable print cartridge
compartment.

XIAOMI-MI.COM

Statuses of indicator

01. Powe/Fault indicator

Slowly blinks white

Quickly blinks white Printing

Quickly blinks red

02. Bluetooth Indicator

Not light up Device is off

Lights white Device is on

Device upgrades / Heating

continues / Cooling

continues

Printer fault

Fix the problem, according to

the tips in the mobile

application

Quickly blinks blue Waiting for connection

Lights blue Connected

XIAOMI-MI.COM

03. Charging indicator

Lights green Fully charged

Lights red Charging

Caution!

1. Recommended ambient temperature when using: - 5 ° C ~ 35 ° C, avoid

using the device in low and high temperatures;

2. Recommended temperature during charging: 5 ° C ~ 35 ° C, avoid charging

the device at low and high temperatures;

3. Recommended image resolution from 1240 x 1864 and above.

For more information, please visit http://www.hannto.com/service or scan your
QR code and sign in to our customer support account at WeChat.

XIAOMI-MI.COM