Mi True Wireless Earphones 2 User Manual

Mi True Wireless Earphones 2
User Manual

Read this manual carefully before use, and retain it for future reference.

Product Overview

Secondary Microphone

Indicator
Light

Charging Case

Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to
product enhancements.

Instructions

Charging

●

Charging the earphones
When the earphones are placed in the charging case, they will
automatically start charging.

●

Charging the charging case
The indicator blinks red while charging, and turns white when fully
charged.
Note: Prior to rst use, the earphones are deactivated. To activate them,
place them into the charging case, and press the function button for 5
seconds. We recommend fully charging the earphones before using
them for the rst time.

Checking Battery Level

●

Checking the battery level of the earphones
After connecting the earphones to a phone, you can check the
earphones' battery level on the phone's status bar.
Note: The phone's status bar always displays the battery level of the
earphone with the lowest battery level. This feature is not supported by
some phones.

●

Checking the battery level of the charging case
Open the charging case's lid, or press the function button if the lid is
closed:
When the indicator light of the charging case stays lit for 5 seconds, it

1.
means the battery is sucient.

Function
Button

Type-C
Charging Port

RL

Earphones

When the charging case's indicator light is blinking, it means the battery

2.
level is low and should be charged immediately.

●

Checking the battery level by a Mi phone
After successfully connecting to a phone, place the earphones into the
charging case and close its lid. Make sure the Bluetooth function is
enabled on your Mi phone. Hold your phone close to the charging case,
then open the case's lid. A notication will appear on the phone, then
you can check the battery level of the earphones and the charging case.
Note: When checking the battery level on your phone, please update
your Mi phone to the latest stable version. This feature is currently only
supported by some Mi phones.

Turning On

When opening the charging case, the earphones will automatically turn
on.

Sleep Mode

Place the earphones back into the charging case and close the lid, the
earphones will disconnect and go into sleep mode automatically.

Wearing

Take the earphones out of the charging case, and insert them into your
ears according to the left (L) and right (R) marks.
Note: After using the earphones, place them back into the charging
case. This will extend their lifespan and help you avoid losing or
misplacing them.

Primary Microphone

02

01

Connecting

●

Connecting the earphones to a new device
Place the earphones into the charging case, then press and hold the

1.
function button for 2 seconds. The charging case indicator light will
start blinking, indicating that the earphones are waiting to be
connected.
Enable the device's Bluetooth, then locate and connect to "Mi True

2.
Wireless Earphones 2". If a passcode is requested, enter "0000".

●

Connecting the earphones with a Mi phone
Place the earphones into the charging case and close its lid. Make sure
the Bluetooth function is enabled on your Mi phone. Hold your phone
close to the charging case, then open the case's lid. Follow the
on-screen instructions of the phone to connect to the earphones.
Note: The feature to quickly connect is currently only supported by
some Mi phones, please update your Mi phone to the latest stable
version.
Connecting to two devices

●

Place one of the earphones into the charging case, then press and hold
the function button for 2 seconds. Use device A to search for and

1.
connect to the earphone.
After the rst earphone is connected to device A, take the earphone out
of the charging case. Now place the second earphone into the charging

2.
case and press and hold the function button for 2 seconds. Use device B
to search for and connect to the earphone. This will connect each
earphone to a separate device.

The connection history has been cleared and the indicator of the

2.
charging case blinks white. Then the earphones are awaiting for a
pairing.

3.

Function Overview

Incoming calls

Gently tap either one of the
earphones twice: Answer/End calls

Music and voice assistant

While wearing both earphones:
Gently tap the right (R) earphone
twice: Play/Pause music
Gently tap the left (L) earphone twice:
Access the voice assistant
Taking out an earphone: Pause music
While wearing one earphone:
Gently tap the earphone twice:
Play/Pause music

Note: The voice assistant function requires device support, and voice
assistant needs to be authorized on the device.

04

Note: Before using this function, the connection history of each

earphone needs to be cleared.
Connection interrupted
When a device's Bluetooth is disabled, or if the earphones are out of

●

range, the earphones will automatically enter awaiting connection
mode. If the earphones remain disconnected to a device for 10 minutes,
they will enter sleep mode. Wearing the earphones again will wake them
up and enter awaiting connection mode.
Automatic connection
While the earphones are in the charging case, opening the case will

●

cause the earphones to automatically connect to the most recently used
Bluetooth device. If no connection history is detected, or if the
earphones cannot successfully connect to any Bluetooth device, the
earphones will automatically enter the awaiting connection mode.
Note: If the earphones cannot automatically connect to a device, you
will need to manually connect the earphones to the desired device via
the device's Bluetooth settings.
Due to the connection characteristics of the Bluetooth signal, in dense
environments with 2.4 GHz electromagnetic signal interferences, there
may be occasional disconnects or no sound.
Clearing connection history
Place the earphones into the charging case.
Press and hold the function button on the charging case for more than

●

10 seconds. Once the indicator alternately blinks red and white, release
the button.

1.

Specications

Model: TWSEJ06WM Net Weight: 50 g
Charging Port: Type-C Impedance: 32 Ω
Input: 5.2 V 1.1 A Charging Time: Approx. 1 h
Wireless Connectivity: Bluetooth 5.0
Bluetooth Proles: BLE/HFP/HSP/A2DP/AVRCP
Supported Audio Codecs: SBC/AAC/LHDC
Wireless Range: 10 m (open space without obstacles)
Earphones' Battery Life (standalone): Approx. 4 h
Total Battery Life (with charging case): Approx. 14 h
Product Frequency Band: 2402–2480 MHz
Maximum Transmit Power for BT: 10 dBm (Declaration for EU)
Maximum Transmit Power for BLE: 10 dBm (Declaration for EU)

WEEE Information

All products bearing this symbol are waste electrical and
electronic equipment (WEEE as in directive 2012/19/EU)
which should not be mixed with unsorted household waste.
Instead, you should protect human health and the environment by
handing over your waste equipment to a designated collection point for
the recycling of waste electrical and electronic equipment, appointed by
the government or local authorities. Correct disposal

03

and recycling will help prevent potential negative consequences to the
environment and human health. Please contact the installer or local
authorities for more information about the location as well as terms and
conditions of such collection points.

Hereby, Tiinlab declares that the radio equipment type
Mi True Wireless Earphones 2 is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
http://www.mi.com/global/service/support/declaration.html

Safety Caution

Do not expose batteries or battery packs to excessive heat such as
sunshine, re or the like.

· Replacement of a battery with an incorrect type that can defeat a

safeguard (such as catching re, explosion, leakage of corrosive
electrolyte etc).

· Disposal of a battery into re or a hot oven, or mechanically crushing

or cutting of a battery, that can result in an explosion.

· Leaving a battery in an extremely high temperature surrounding

environment that can result in an explosion or the leakage of
ammable liquid or gas.

· A battery subjected to extremely low air pressure that may result in
an explosion or the leakage of ammable liquid or gas.

· Risk of explosion if battery is replaced by an incorrect type.

· Dispose of used batteries according to the instructions.

· The product operation maximum ambient temperature is 45°C.

To prevent possible hearing damage, do not listen at
high volume levels for long periods.

The symbol indicates DC voltage

The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Tiinlab is under license.
Other trademarks and trade names are those of their respective owners.

Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Tiinlab Acoustic Technology Limited
(a Mi Ecosystem company)
Address: Tianliao Building 1403, Tianliao Industrial Area A, Taoyuan Street,
Nanshan District, Shenzhen 518055, China

For further information, please go to www.mi.com

05