Mi Fast Charge Power Bank 3 User Manual
10000mAh Mi 18W
Fast Charge Power Bank 3
User Manual
Read this manual carefully before use, and retain it for future reference.
Product Overview
Thank you for choosing this high-capacity power bank that uses high-quality lithium
polymer baery cells and a charging and discharging chip with excellent performance in
safety, efficiency, and compatibility.
USB-C Port (Input)
USB-A Port (Output)
USB-A Port (Output)
Notes:
Micro-USB Port (Input)
Baery Level Check Buon
Baery Level Indicator
The baery level check buon is not a power buon. The power bank automatically
detects charging and discharging.
The baery level indicator turns off in about 2 minutes aer being fully discharged.
Safety: The Mi Power Bank is provided with multiple safeguarding technologies to prevent
overcharging, over-discharging, overheating, and short circuits in any
working condition.
Fast Charging: The power bank supports 5.1 V/2.4 A, 9 V/2 A and 12 V/1.5 A using a USB-A
cable. The maximum output power is 18 W when charging two devices simultaneously
using dual-port output.
Compatibility: Built-in smart USB charging controller, and compatible with most mobile
phones and electronic devices in the market.
Quality: High-quality lithium polymer baery cells, and a charging and discharging chip.
01
Charging
Connect a Mi power adapter to the power bank via the USB-C or Micro-USB port to
charge the power bank. The indicator shows the following charging status:
LED1
LED2
LED3
LED4
Baery Level
0-25%
25-50%
50-75%
75-99%
Fully Charged
Charging Error
LED1
Blinking
On
On
On
On
Blinking
LED2
Off
Blinking
On
On
On
Blinking
LED3
Off
Off
Blinking
On
On
Blinking
LED4
Off
Off
Off
Blinking
On
Blinking
Discharging
This power bank uses the USB-A ports for charging other devices. The indicator shows the
following discharging status:
Baery Level
Undervoltage
0-25%
LED1
Off
Blinking
LED2
Off
Off
LED3
Off
Off
LED4
Off
Off
25-50%
50-75%
75-100%
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Off
Blinking
Blinking
Off
Off
Blinking
Low-current discharge: When the power bank is not charging, double press the baery
level check buon to enter the low-current discharge mode. This mode can be used to
charge low-current devices such as Bluetooth headphones and smart bands. The
indicator lights will turn on one by one so as to indicate the power bank is in low-current
discharge mode. Simply press the buon again to exit this mode. The power bank will
automatically exit this mode aer two hours.
02
Loading...