3. Assembly and Set-Up ..............................................................................................................................................04
4. Charge Your Scooter ...............................................................................................................................................05
5. Connect with Mi Home / Xiaomi Home App ................................................................................................. 06
6. How To Ride ................................................................................................................................................................ 06
8. Folding and Carrying ................................................................................................................................................14
9. Daily Care and Maintenance ................................................................................................................................15
User ManualLegal StatementWarranty NoticeMaintenance CardQuick Start Guide
Carefully check the package contents, if anything is missing or damaged, please contact the
local customer service for support.
02
2. Product Overview
Handlebar
Accelerator
Control Panel & Power Button
Headlight
Brake Lever
Stem
Folding Mechanism
Front Fork
Wheel Motor
Charging Port
Scooter Bell Lever
Scooter Bell
Quick Release Lever
Buckle
Mudguard
Brake Light
Disc Brake
Kickstand
Battery
Compartment
Control Panel & Power Button
Speedometer: Display the current speed of the scooter, as well as to display error codes.
Modes: Three riding modes available. "ECO" for Energy Saving mode (top speed approx. 15 km/h,
smooth throttle, suitable for beginners), "D" for Standard mode (top speed approx. 20 km/h)
and "S" for Sport mode (top speed approx. 25 km/h, powerful, only recommended for skilled
riders).
Bluetooth: The icon indicates that the scooter has been successfully connected to the mobile device.
Error: The wrench icon indicates that the scooter has detected an error.
Battery Level: The battery power is indicated by 5 bars, each representing approximately 20 % of a
full battery.
Power Button: Press the button to turn the scooter on, and press and hold the button for 3 seconds to
turn the scooter off. When the scooter is on, press the button to turn the headlight on/off,
and double press to switch between modes.
03
3. Assembly and Set-Up
1. Fold the handlebar stem up, fasten it, and
put down the kickstand.
3. Tighten the screws onto both sides of the
stem with the T-shaped Allen key.
2. Install the handlebar onto the stem.
4. Aer the assembly, press the power
buon to check if it’s working properly.
04
4. Charge Your Scooter
Charging condition description:
The scooter is fully charged when the LED on the charger changes from red (charging) to green
(trickle charge).
Lift up the rubber flap.Plug the charging adapter into
the charging port.
When charging is completed,
put back the rubber flap.
05
5. Connect with Mi Home / Xiaomi Home App
This product works with Mi Home / Xiaomi Home app*. Control your device with Mi Home /
Xiaomi Home app.
Scan the QR code to download and install the app. You will be directed to the connection setup
page if the app is installed already. Or search "Mi Home / Xiaomi Home" in the app Store to
download and install it.
Open Mi Home / Xiaomi Home app, tap "+" on the upper right, and then follow prompts to add
your device.
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app
displayed on your device should be taken as the default.
Note: The version of the app might have been updated, please follow the instructions based on
the current app version.
6. How To Ride
Warning: Wear a helmet, elbow pads and
knee pads. Please read the instruction
carefully before using. Do not touch the
1. Turn on the scooter, and check the power
indicator.
brake system. Refer to the instruction for
more information.
06
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.