User Manual of Mi AIoT Router AX3600.
All images are for illustration purposes only and may
differ from the actual product by model and region.
English
Step 1: Connect the cables
DSL/Cable/
Satellite modem
LAN
WAN 1 2 3
WAN
or
RESET
Connect
the power
Power on the router, then connect the Internet (WAN) port
to the DSL/Cable/satellite modem
* If your Internet network is connected via an Ethernet cable at the wall, connect
the Ethernet cable directly to the Internet (WAN) port on the router
3
English
Step 2: Set up the network connection
WLAN
Turn on WLAN
Xiaomi_XXXX
Xiaomi_XXXX_5G
router.miwifi.com
Thank you for using
Mi Router
Start
Set up the router
Broadband account name
Password
Next
1
Connect to the Wi-Fi using a mobile phone or
computer (no password). The Wi-Fi name is
indicated on the product specification label
at the base of the router.
* Wait until the system indicator light turns blue.
Search for the Wi-Fi network and connect
2
At this point, you will automatically be
directed to the landing page for connecting
to the Internet (if you aren’t, open up the
browser that comes with your system and
enter "router.miwifi.com" or "192.168.31.1")
* Mi Router End User License Agreement is
available at:
hp://www1.miwifi.com/router/eula/20191230.html
3
Please enter the account name and password
provided by your broadband provider, then click
Next (there are different ways of connecting to
the internet, so this step may be skipped)
* If you have forgoen your broadband account
name or password, you can get them by
contacting your broadband provider
4
English
Seing Wi-Fi
Wi-Fi name
Wi-Fi password
Next
4
Set a new Wi-Fi and administrator password.
You can choose to use your Wi-Fi password
as your administrator password as well
* Please wait until the indicator light turns blue
and stops flashing, then reconnect to the Wi-Fi
Set admin password
Same as Wi-Fi
password
Admin password
Done
Network established
successfully
How to set up the AIoT Intelligent Antenna and add devices
1. Scan the QR code to download the Mi WiFi app and the Mi Home/Xiaomi Home-APP app.
2. Add the router to your Mi Account.
Connect your smartphone to the Wi-Fi
hotspot of your Mi Wi-Fi router. Open the
Mi WiFi app and log in to your Mi
account. Follow the prompts to add the
router to your Mi account.
Find a Mi/Redmi router
INTENET
SYSTEM
Mi AloT Router AX3600
Add now
3. Add Mi Smart Home devices
Connect your Mi Smart Home device to the
power supply. The AIoT Intelligent Antenna will
automatically detect the device. Open the Mi
Home app and log in to the Mi account used in
the previous step. A prompt will be displayed
indicating that a new device has been
discovered. Follow the instructions to add the
device.
The AIoT router has discovered
a Mi Air Conditioner
Connect Ignore
*Supports most
Wi-Fi-enabled Smart
Home devices that
connect via the Mi Home
app. Ensure that your
device is updated to the
latest version and place it
within range of the Mi
Wi-Fi router.
5
English
FAQ
What should I do if the Mi Home app fails to automatically detect my Mi Smart Home device?
Step 1:
Check that you have configured the network seings on your router and that the router is connected to
the Internet. The Internet indicator should be constant blue.
Step 2: Check that the router has been added to the Mi Home app, and that the Mi Home app is logged in to
the same Mi account as the Mi WiFi app.
Step 3: Make sure the "AIoT Intelligent Antenna Automatic Scan" option has been enabled on the router. This
option can be configured in the Mi WiFi app.
Step 4: Check that your Mi Smart Home device is a Wi-Fi-enabled device and that it is running the latest
version. The device must be placed within range of the Mi Wi-Fi router. Some devices with built-in Internet
connectivity are not supported.
I have finished seing up my network. Why can't I connect to the Internet?
Step 1:
Use your phone to search for the Wi-Fi network set by your router. If you can’t find it, make sure that
the router is connected to the power and has finished booting up
Step 2: Connect your phone to your router's Wi-Fi network, go to router.miwifi.com", and try to fix the
problem based on the network diagnostics results
I've forgoen the administrator password for my router. What should I do?
If you haven’t set a specific password, your administrator password will be the same as your Wi-Fi password,
so try using this to log in. If the problem persists, it is recommended that you restore your router to the factory
seings, then set up the network again
How do I restore my router to the factory seings?
First make sure that the router has finished booting up, then hold down the Reset buon at the base of the
router for more than 5 seconds and let go when the system status light turns orange. When the router finishes
booting up again, the reset was successful
What do the different indicator lights mean on the router?
AIoT status indicator
Network status light
System status light
Network status indicator Internet
Off
Orange
Blue
INTENET
SYSTEM
two colors (blue and orange)
The network cable is not plugged into the WAN port
Constant: The network cable is plugged into the WAN port
but the upstream network is not available
Constant: The network cable is plugged into the WAN port
and the upstream network is available
System status indicator System two colors (blue and orange)
Off
Orange
Blue
Not connected to power supply
flashing: System update in progress
Constant (turns blue aer approx. 1 minute): The system is starting
Constant (does not turn blue aer approx. 2 minutes): System fault
Constant: Working normally
AIoT status indicator Single color light (blue)
Off
Blue
AIoT Intelligent Antenna Automatic Scan OFF
AIoT Intelligent Antenna Automatic Scan ON
Network port indicator one color (green)
Off
Green
6
The network port has no physical connection
The network port has a physical connection
Mi AloT Router AX3600
English
Specifications:
Name:
Mi AIoT Router AX3600
Model: R-3600
Operating Temperature: 0~40℃
Input: 12V, 2A
Operating Frequency: 2400MHz~2483.5MHz(≤20dBm), 5150MHz~5350MHz(≤23dBm)，
5470MHz~5725MHz(≤30dBm)
Certifications:
Hereby, Xiaomi Communications Co., Ltd declares that the radio equipment type R-3600 is
in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address:
hp://www.mi.com/global/service/support/declaration.html
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in
directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead,
you should protect human health and the environment by handing over your waste
equipment to a designated collection point for the recycling of waste electrical and
electronic equipment, appointed by the government or local authorities. Correct disposal
and recycling will help prevent potential negative consequences to the environment and
human health. Please contact the installer or local authorities for more information about
the location as well as terms and conditions of such collection points.
7
English
Caution:
The product can be used within all European Union countries (BE/FR/DE/IT/LU/NL/DK/
IE/GB/GR/PT/ES/AT/FI/SE/CY/CZ/EE/HU/LV/LT/MT/PL/SK/SI/BG/RO/HR).
To comply with CE RF exposure requirements, the device must be installed and operated 20cm
(8 inches) or more between the product and all person’s body.
The adapter shall be installed near the equipment and shall be easily accessible.
Use only power supplies listed in the user manual / user instruction.
Power Adapter Model: AD-0241200200EU-1
Manufactured by: SHENZHEN AMC TECHNOLOGY CO.,LTD
Power Adapter Model: CYBD-P120200E
Manufactured by: Chenyang elec.
Power Adapter Model: RD1202000-C55-154OG
Manufactured by: Shenzhen Ruide Electronic Industrial Co., Ltd.
Manufactured by: Xiaomi Communications Co., Ltd
#019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085
Importer:
Beryko s.r.o.
Na Roudné 1162/76, 301 00 Plzeň
www.beryko.cz
8
Loading...