Mi 360° 1080p Home Security Camera, Home Security Camera User Manual

This version is for private use only and should not be distributed.

Mi Home Security Camera

360° 1080p User Manual

This version is for private use only and should not be distributed.

Read this manual carefully before use, and retain it for future reference

Product Overview

Status Indicator

Lens

MIC

MicroSD Slot

(Can be
revealed by
pushing the
lens upward)

Reset
Button

Front View Rear View

reset

Loudspeaker

Micro-USB

Charging Port

Package Contents: Mi Home Security Camera 360° 1080p, power cable, wall mounting

accessories pack, user manual

Installation

The Mi Home Security Camera 360° 1080p can be placed on a number of horizontal surfaces,
such as a writing desk, dining table, and coffee table. It can also be mounted on the wall.

Mounting the Security Camera on a Wall

1. Drill two holes on the wall by using the base of the security camera as a template. It is
recommended that you mark the locations of the holes with a pencil before drilling. The
diameter of each hole is approximately 6 mm and the depth is approximately 30 mm.

01

This version is for private use only and should not be distributed.

2. Insert the two plastic anchors into the holes on the wall.

3. Place the side of the base with arrows

facing forward, and then align the holes.
Insert the screws and then tighten them
into the wall plugs with a Phillips head
screwdriver.

4. Match the grooves on the boom of
the camera unit with the raised area on
the base unit. Press down until the two
surfaces are flush, then turn the camera
unit in either direction to lock it in position.

Warning:

To avoid any damages or injuries, the device must be securely fastened to the floor/wall as
specified in the installation instructions.

When mounting the security camera on a wall: please note that the wall must be able to

support at least triple the product’s total weight.

02