Mi 16-in-1 Precision Screwdriver User Manual
Mi 16-in-1 Precision Screwdriver
Thank you for purchasing the Mi 16-in-1 Ratchet Screwdriver. Read
this manual carefully before use, and retain it for future reference.
Bit Holder
1
3-position Ratchet
2
Position Mark
3
Handle
4
Bit Magazine
5
How to Use
Opening/Closing the Magazine
Hold the handle and press the lid of
·
the bit magazine to eject the
magazine.
Hold the handle and press the lid of
·
the bit magazine to close the
magazine.
Ratchet Adjustment
R
Adjust the ratchet by aligning the
·
position mark with R. Once set to
R, turn the screwdriver clockwise to
tighten screws.
Manual
Adjust the ratchet by aligning the
·
position mark with •. Once set to
manual, turn clockwise to tighten
screws, or turn counterclockwise
to loosen screws.
L
Adjust the ratchet by aligning the
·
position mark with L. Once set to L,
turn the screwdriver counterclockwise to loosen screws.
Bit Magazine Lid
6
Bit
7
Bit Extension
8
Steel Detent Ball
9
6
5
4
3
2
1
Bit Extension Instructions
When using the bit extension, insert it
·
into the bit holder of the screwdriver
(use force when inserting the bit
extension to ensure the steel ball
is properly pressed into the holder).
Bit Storage
The bits are held in place by a magnet in
·
the ejected magazine.
The bit can be used by directly inserting it
·
into the bit holder of the screwdriver, or
by using the bit extension.
Illustrations of product, accessories, and
user interface in the user manual are for
reference purposes only. Actual product
and functions may vary due to product
enhancements.
Precautions
After pressing the lid of the magazine, it will be partially ejected.
·
Moreover, the magazine can be completely removed from the
screwdriver.
This screwdriver must be held perpendicular to the screw you
·
want to tighten/loosen.
Do not disassemble this screwdriver.
·
Specifications
Model: MJJLLSD002QW Net Weight: 230 g
Maximum Torque: 20 N·m
Bit Sizes: C6.3 × L 32 mm double-ended bits
SL4, SL6, PH0, PH1, PH2, PH3, PZ1, PZ2, T15, T20, T25,
T30, H3, H4, H5, H6
Screwdriver Dimensions: 144 × 34 × 34 mm
Bit Extension Dimensions: 110 × 10 × 10 mm
Importer: Beryko s.r.o., Na Roudné 1162/76, 301 00 Plzeň
www.beryko.cz
7
8
9
Loading...