MGI MODERN DIGITAL CLOCKHIDDEN CAMERA, MiniClockDeluxe User Manual

MODERN DIGITAL CLOCK
HIDDEN CAMERA
SKU: MiniClockDeluxe
THANK YOU FOR PURCHASING THE MODERN DIGITAL CLOCK HIDDEN CAMERA
Please read this manual before operating the modern digital clock hidden camera and keep it handy.
Our line of mini clock cams is one of our bestselling products. These functional clocks with hidden cameras are a great option for covert recording. The sleek design with blue LED display will fit in anywhere. The display cycles through time, date, and temperature.
This camera can record 1280*960 resolution color video with a 72° viewing angle, which can be stored on a MicroSD card 2GB – 32GB in size. The battery lasts up to 12 hours on one charge. Use the remote control to choose between taking photo, recording continuous video, or using motion detection.
Your purchase should include: 1 x Modern Digital Clock Hidden Camera 1 x Remote Control 1 x USB Cable 1 x AC Charger with Cable 1 x Instruction Booklet
3
GET FAMILIAR WITH YOUR MODERN DIGITAL CLOCK HIDDEM CAMERA
Figure 1: Front View
Figure 2: Back View
Charging Light
LED Display
Talk Button
Clock Function Buttons
USB Port Power Switch
SD Card Slot
Camera Lens
Indicator Light
OPERATING THE MODERN DIGITAL CLOCK HIDDEN CAMERA
IMPORTANT NOTICE: Allow the device to charge 4 – 6 hours before using.
HOW TO CHARGE THE MODERN DIGITAL CLOCK
Using the AC Adapter
1. Push the switch to OFF
2. Plug the AC adapter with cable into
a wall outlet
3. Plug the cable into the clock
The red charging light will be
on while the device is charging
Using the USB Cable
1. Push the switch to OFF
2. Plug the USB cable into your PC
3. Plug the USB cable into the clock
The red charging light will be
on while the device is charging
The red charging light will
turn off when fully charged
HOW TO SET THE TIME AND DATE
The time, date, and temperature will all be displayed on the front LED display.
The first time you plug in the mini clock travel, the LED display will count upward 0 – 9. The LED display will rotate between time, date, and temperature. The temperature
default is Celsius and the time default is Military.
Five buttons that you need for setting up the mini clock travel are located on the back of the device (see Figure 2):
TIME
DOWN
UP
SET
MODE
Set the Year
1. Push the SET button on the back of
the device. “2010” should be blinking on the LED display.
2. Push the UP button on the back of
the device until the LED display reads the current year.
Set the Month and Day
1. Push the SET button again. There
should be a “1” blinking on the left side of the LED display. This is the month.
2. Push the UP or DOWN button until
the number on the left side reads the current month.
3. Push the SET button again. There
should be a “1” blinking on the right
side of the LED display. This is the day.
4. Push the UP or DOWN button until
the number on the right side reads the current day.
Set the Time
1. Push the SET button again. The hour
should be blinking.
2. Push the UP or DOWN button until
the LED display reads the current hour.
3. Push the SET button again. The
minutes should be blinking.
4. Push the UP or DOWN button until
the LED display reads the current minute.
Switch from Military to Civilian Time
1. Push the TIME button on the back
of the device.
2. Push the UP button to switch
between military (24:00) and civilian (12:00).
Switch from Celsius to Fahrenheit
1. Push the TIME button on the back
of the device.
2. Push the DOWN button to switch
between degrees Celsius and degrees Fahrenheit.
3
Set the Alarm
1. Push the MODE button on the back
of the device. The LED display should read like the following:
2. Push the SET button on the back of
the device. The hour should be blinking.
3. Push the UP or DOWN button to set
the hour for which you want the alarm to sound.
4. Push the SET button again. The
minutes should be blinking.
5. Push the UP or DOWN button to set
the minute for which you want the alarm to sound.
6. Push the SET button again. The LED
display should read with a “01.”
This is the snooze.
Snooze can last from
1 – 60 minutes.
7. Push the UP or DOWN button to set
the snooze time.
8. Push the SET button again. The LED
display should read with a “1.”
This is the alarm ring.
There are 6 rings from which
to choose
Rings 1 – 5 are nature sounds
Ring 6 is a repetitive buzz.
Push the MODE button on the back of the device to exit the alarm.
NOTICE: You have only set the alarm with these steps
Turn On the Alarm
1. Push the MODE button on the back
of the device.
2. Push the UP button on the back of
the device.
If the LED screen reads - - : - -
then the alarm is off
If the LED screen reads the
time for which you set the alarm, the alarm is on
3. Push the MODE button to exit the
alarm.
4. To stop the alarm after it sounds,
press the button on top of the device.
HOW TO RESET THE TIME AND DATE STAMP (Windows Only)
1. Connect the device to your PC using
the USB Cable
2. Go to
http://www.mgidownloads.com/
3. Click on "WriteTime.exe"
4. Click on "camstickma.exe"
IM PO RTANT NOTICE: Y ou might re ce iv e a warning t hat this progra m co nt ains a virus. D isregard th is wa rn ing. The progra m is safe to us e.
5. Go to Start > Computer > Downloads
> Open WriteTime.exe
6. Click "Run"
7. The program will automatically
detect the device.
8. Click "Update"
3
PREPARING THE DEVICE FOR USE
1. Be sure the Power Switch is
switched from OFF to ON.
2. Insert a MicroSD card into the slot
located to the left of the Power Switch.
3. Make sure your clock has been fully
charged.
4. Place the device where you want to
record.
USING THE REMOTE
Power Button
Motion Detection Button
Video Button
Camera Button
HOW TO TURN ON THE CAMERA
1. Push the Power Button on the
remote
The blue indicator light will
come on
HOW TO RECORD VIDEO
1. Push the Video Button on the
remote
The blue indicator light will
flash 3 times and then turn off
The device is now recording
HOW TO TAKE PHOTOS
1. Push the Camera Button
HOW TO USE MOTION DETECTION
1. Press the Motion Detection Button
The blue indicator light will
flash quickly
3
RETRIEVE THE FILES TO YOUR PC
1. Plug the device into your PC using the USB cable.
2. Locate “Removable Disk” inside the (My) Computer folder.
AutoPlay Removable Disk > Open folder to view files
Or…
Go to Start > Computer > Removable Disk
3. Open the Removable Disk drive.
4. Open the DCIM folder.
5. Double click the file you want to view.
VLC Player is recommended for watching videos.
3
TROUBLESHOOTING
THE DEVICE WON’T TURN ON
Charge the device for at least 4 hours before the first use.
Make sure the charging cable is securely inserted into the
device and into the power source.
THE DEVICE ISN’T CHARGING
Replace the battery or charging cable.
If you are charging via a wall power source, you may need to
charge via your PC. The A/C adapter might be bad.
THE DEVICE HAS CRASHED
You need to reset the device.
MY COMPUTER DOESN’T RECOGNIZE THE DEVICE
Unplug the device from your PC and reboot the device.
Unplug the device from your PC and reboot your PC.
Try using a different USB slot on your PC.
Replace the USB cable.
THE SOUND OR VIDEO IS UNCLEAR
The device needs charging.
OTHER PROBLEMS
Call our technical support at 770–694–6921
SPECIFICATIONS
Pixels
5 Mega
Video Resolution
1280*960
Video Format
AVI
Frames per Second
30
Recording Time
12 hours
Vision Angle
72°
Motion Detection
Yes
Lux
Rating
1Lux
Water Resistant
No
Battery Life
12 hours
Type of Memory
MicroSD Card
Memory Capacity
2GB –
32GB
Recording Capacity 2GB ≈ 1 hour
4GB ≈ 2 hours 8GB ≈ 4 hours 16GB ≈ 8 hours
32GB
≈ 16 hour
s
USB Interface
2.0 USB
Player Software
VLC
recommended
Operating Systems Windows 2000
Windows Me Windows XP Windows Vista Windows 7 Mac OSX
Linux
Loading...