M&G DuraVent PolyPro Flex User Manual

A Simple and Flexible Solution For Venting Multiple PolyPro Liners

Need to run multiple exible liners in a single chimney or B Vent space? Do your installations have an endless

variety of ue sizes and conduit sizes?

M&G DuraVent’s new solution for venting multiple Polypro liners (ex or rigid) provides a simple and exible solution. For support, M&G DuraVent simplies the installation by using a hose clamp and new reline hanger support. The reline upper plates nish the install and provide a water tight seal.

A great combination for two pipe venting systems for 90+ furnaces or when you just plain need to vent more than one appliance in the same space.

New reline allows for a liner for ue and a liner for combustion air, creating an easy conversion to black for exposed pipe. For specic installation guidance per our listing, please reference our installation instructions at DuraVent.com

All PolyPro terminations and components are listed.

Reline Upper Plate

2PPS-RPU; 3PPS-RPU; 4PPS-RPU

Used to seal pipe penetration with gasket, plate needs to be silicone sealed and fastened to (eld fabricated) support plate.

SIZE 2” | 60mm 3” | 80mm 4” | 100mm

ORDER #

LIST PRICE

Reline Hanger Support

PPS-RH

Universal for 2”-4” diameters. Used to support ex under the support plate. Clamps around the ex and is fastened to the support plate, then covered by the reline upper plate at the correct size.

SIZE 2” - 4” | 60mm - 100mm

ORDER #

LIST PRICE

2PPS-RPU 3PPS-RPU 4PPS-RPU

$12.50 $13 .15 $13.45

PPS-RH

$2 7.8 5

For current pricing and availability, please call customer service at 800-835-4429.

Information published in all M&G DuraVent bulletins is current at time of publication and is subject to change without notice.