Mga Entertainment HULKPINBALL IM User Manual

Electronic Pinball

Operating Instructions

BATTERY INSTALLATION

• Unscrew the battery cover with a Phillips screwdriver.

• Insert 3 "C" (1.5V) batteries with the positive (+) and negative (-) ends facing in the proper direction as indicated in the battery compartment. (see Fig. 1)

• Replace the cover.

SAFETY BATTERY USAGE

• Non-rechargeable batteries are not to be recharged;

• Rechargeable batteries are to be removed from the toy before being charged;

• Rechargeable batteries are only to be charged under adult supervision;

• Different types of batteries or new and used batteries are not to be mixed;

• Only batteries of the same or equivalent type as recommended are to be used;

• Batteries are to be inserted with the correct polarity;

• Exhausted batteries are to be removed from the toy;

• The supply terminals are not to be short-circuited;

• Do not dispose the batteries in fire, batteries may leak or explode;

• Batteries should be replaced by adult.

CAUTION

• Adults should replace batteries.

• Not suitable for children ages 3 & under.

• May contain small parts.

• Do not dispose of batteries in fire; batteries may explode or leak.

• This product contains glass which may cause injury if broken.

CARING FOR YOUR DEVICE

• If the display becomes dim or malfunctions, replace the batteries.

• After replacing batteries, press the RESET button to ensure proper functioning. (In most cases, game malfunctions are due to weak batteries.)

BATTERY INSTALLATION

(Fig. 1)

BUTTON DESCRIPTION

1. POWER ON/NEW GAME

2. POWER OFF

3. BACKGROUND MUSIC ON/OFF

4. HIGH SCORE

5. RESET

6. LOADING LEVER

7. SHOOTER

8. FLIPPER BUTTON

9. TRAP TRIGGER

10. HEADER

11. BALL TRAP CHAMBER

QUICK START

• Unfold the header before you play the game.

• Press the [ON/NEW GAME] button to start the new game.

• Press the [OFF] button to turn off the unit.

• Press [RESET] button to set the LCD score counter to zero.

• Press [HI-SCORE] any time to check the highest score.

• Press [BACKGROUND MUSIC] any time to turn on or off the background music.

• Pull out [LOADING LEVER] on ball tube to load the balls.

• Pull [SHOOTER] to release the ball.

• Press the [FLIPPER BUTTON] to keep the ball from exiting the playfield. The object of the game is to keep the ball on the playfield for as long as possible while hitting as many bumpers (and scoring as many points) as you can. A score of 999900 wins the game.

• Manipulate the [TRAP TRIGGER] to make the ball fall into the Ball Trap chamber, which will result in getting bonus points varying from 5000 to 20000 points every time this is achieved.

• Both figures will spin every time the player achieves 10000 points and the ball falls into the Ball Trap chamber, as well as when the game is won.

• The game is over when all three balls fall beyond the flippers and exit lanes.

Under the environment with electrostatic discharge, the sample may malfunction and require user to reset the sample.

PLEASE RETAIN THIS INSTRUCTION MANUAL WHICH CONTAINS IMPORTANT INFORMATION.

BUTTON DESCRIPTION

1 2 3 4

• Insert the rubber supports (for elevation) into the bottom of the base unit. (see Fig. 2)

• Insert the 2 figures (on both sides of the vertical display panel), hold down the turning platform and turn the figure 90 degrees (clockwise) to secure the figures in position so that they are facing you. (see Fig. 3)

QUICK ASSEMBLY

Fig. 2

Fig. 3

Made In China

0503-1