MGA Entertainment 643651C User Manual

ENG

643651C

The Construct ‘n Learn Smart Workbench™ will launch and run on all Android devices

4.3 or higher and all Apple devices running iOS 7 and above. Devices must support Bluetooth LE for the app to sync with the workbench. For a complete list of compatible devices, please visit

littletikes.com/smartworkbench

ADULT SUPERVISION AND BATTERY INSTALLATION REQUIRED

3+ YEARS

0717-1-C

Please keep this manual as it contains important information.

© The Little Tikes Company, an MGA Entertainment company. LITTLE TIKES® is a trademark of Little Tikes in the U.S. and other countries. All logos, names, characters, likenesses, images, slogans, and packaging appearance are the property of Little Tikes. Little Tikes Consumer Service 2180 Barlow Road Hudson, Ohio 44236 U.S.A. 1-800-321-0183

Printed in China

MGA Entertainment UK Ltd 50 Presley Way Crownhill Milton Keynes MK8 0ES Bucks, UK 0800 521 558

www.littletikes.com www.littletikes.co.uk

Visit our website at

www.littletikes.com

to register your product and

to enter our sweepstakes.

(No purchase necessary)

Download the Smart Workbench app using the QR code here, or by visiting

littletikes.com/smartworkbench

WARNING

• ADULT ASSEMBLY REQUIRED

• Keep these instructions for future reference.

• Keep long hair and loose apparel away from the rotating drill bit.

• Prior to assembly, this package contains small parts: hardware which is a choking hazard and may contain sharp edges and sharp points. Keep away from children until assembled.

• This product is intended for indoor family use only.

• This product is indented for use by children ages 3 years and up.

• Do not allow children to sit, stand, play or climb on the top surface. Failure to do so may cause the product to become unstable.

• IMPORTANT: DO NOT immerse RFID chip items in water. Wash with a damp cloth only.

• Electronic devices to be installed and removed by an adult only.

CONTENTS

ADULT ASSEMBLY REQUIRED

IMPORTANT INFORMATION

• Please save sales receipt for proof of purchase.

• Clean the unit with a slightly damp cloth (cold water) and mild soap if necessary.

• Real tools are not recommended for use with this unit or accessories.

• Do not apply ruler sticker to anything other than the work surface, as it may not be removed.

• Always turn the work surface and drill OFF after use to conserve battery power.

• NOTE: If the unit stops working or doesn’t work as it should, remove the batteries for a few minutes and then re-insert them. If there is still a problem, install new batteries.

• DISPOSAL: Disassemble and dispose of equipment in such a manner that no hazardous conditions such as, but not limited to, small parts and sharp edges exist at the time the equipment is discarded.

B C

The Little Tikes Company makes fun, high quality toys. We warrant to the original purchaser that this product is free of defects in materials or workmanship for one year * from the date of purchase (dated sales receipt is required for proof of purchase). At the sole election of The Little Tikes Company, the only remedies available under this warranty will be the replacement of the defective part or replacement of the product. This warranty is valid only if the product has been assembled and maintained per the instructions. This warranty does not cover abuse, accident, cosmetic issues such as fading or scratches from normal wear, or any other cause not arising from defects in material and workmanship. *The warranty period is three (3) months for daycare or commercial purchasers. U.S.A and Canada: For warranty service or replacement part information, please visit our website at www.littletikes.com, call 1-800-321-0183 or write to: Consumer Service, The Little Tikes Company, 2180 Barlow Road, Hudson OH 44236, U.S.A. Some replacement parts may be available for purchase after warranty expires—contact us for details. Outside U.S.A and Canada: Contact place of purchase for warranty service. This warranty gives you specific legal rights, and you may also have other rights, which vary from country/state to country/state. Some countries/states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

LIMITED WARRANTY

BATTERY SAFETY INFORMATION

• Use only size “AA” (LR6) alkaline batteries (4 required) and “AAA” (LR03) alkaline batteries (3 required).

• Charging of rechargeable batteries should only be done under adult supervision.

• Remove rechargeable batteries from the product before recharging.

NOT INCLUDED

• Do not mix old and new batteries.

• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.

• Be sure to insert the batteries correctly and follow the toy and battery manufacturer’s instruction.

• Always remove exhausted or dead batteries from the product.

• Dispose of dead batteries properly: do not burn or bury them.

• Do not attempt to recharge non-rechargeable batteries.

• Avoid short-circuiting battery terminals.

• Remove batteries before placing the unit into storage for a prolonged period of time.

RFID Chip

FCC COMPLIANCE

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Modifications not authorized by the manufacturer may void users authority to operate this device. CAN ICES-3 (B)/NMB-3(B).

‘Let’s care for the environment!’ The wheelie bin symbol indicates that the product must not be disposed of with other household waste. Please use designated collection points or recycling facilities when disposing of the item. Do not treat old batteries as household waste. Take them to a designated recycling facility.

Accessories with the symbol contain a RFID chip and interact with the app. DO NOT immerse RFID chip items in water. Wash with a damp cloth only.

+ 2 hidden pages