MG TOP SP, TOP B, TOP SP EH, TOP B EH Operation Instructions Manual
OPERATION AND MAINTENANCE MANUAL
for Blind Staplers TOP B and TOP SP,
Blind Staplers TOP B EH and TOP SP EH
Page: 1
Mod.: 04_2013
ET 571
Seite 1 von 8 02.04.13 P:\Technik\TOP\Bedienungsanleitung\Englisch\Operation Instructions TOP EH engl 0413.docx
Operation Instructions
Blind Staplers TOP B and TOP SP,
Blind Staplers TOP B EH and TOP SP EH
IMPORTANT
Before the first commissioning read this manual thoroughly and completely and keep it in a safe place.
Observe and follow the safety instructions and only use the machine if you are sure that you have
completely understood all the instructions.
Failure to comply can lead to injuries!
If you have any questions, contact the manufacturer
MEZGER Heftsysteme
Saganer Straße 24
90475 Nürnberg
Germany
TOP SP
TOP B
TOP SP EH
TOP B EH
3) Operating lever
14) Trigger
34) Staple magazine
37) Staple pusher
40) Countersunk screws
43) Clinching support
43
14
40
34
37
OPERATION AND MAINTENANCE MANUAL
for Blind Staplers TOP B and TOP SP,
Blind Staplers TOP B EH and TOP SP EH
Page: 2
Mod.: 04_2013
ET 571
Seite 2 von 8 02.04.13 P:\Technik\TOP\Bedienungsanleitung\Englisch\Operation Instructions TOP EH engl 0413.docx
Modell
Type/description:
Preface
For a safe operation of the stapling machine it is necessary to acquire the knowledge conveyed by
these ORIGINAL OPERATING INSTRUCTIONS. The information is presented in brief and clear form.
The chapters are sorted by numbers.
Copyright
The copyright of this operation manual remains with MEZGER Heftsysteme GmbH.
Contents overview
Contents overview ................................................................................................................. 2
1 Safety information ........................................................................................................... 3
2 Warranty and Liability ..................................................................................................... 4
3 Intended use ................................................................................................................... 4
4 Ambient conditions/Emission .......................................................................................... 4
5 Initial commissioning ....................................................................................................... 4
6 Miscellaneous ................................ ................................................................ ................. 5
7 Handling ......................................................................................................................... 5
8 Loading the magazine ..................................................................................................... 6
9 Trouble shooting ............................................................................................................. 6
10 Technical Data / Options ................................................................................................. 6
11 Fundamental notes on the work technique and handling................................................. 7
12 Shutting down ................................................................ ................................................. 7
13 Maintenance and care .................................................................................................... 7
14 Technical documentation ................................................................................................ 8
See label
OPERATION AND MAINTENANCE MANUAL
for Blind Staplers TOP B and TOP SP,
Blind Staplers TOP B EH and TOP SP EH
Page: 3
Mod.: 04_2013
ET 571
Seite 3 von 8 02.04.13 P:\Technik\TOP\Bedienungsanleitung\Englisch\Operation Instructions TOP EH engl 0413.docx
1 Safety information
Safety instructions and important explanations are labelled with the following pictograms.
The symbols used in the operating instructions have the following meaning:
Symbol
Signal word
Meaning
Warning notice
Warning of possible injuries to persons or
possible damage to property
Warning of possible defects or destruction
of the machine
Prohibition
Indicates
general
prohibitions!
Warning notice
Risk of fingers being crushed!
Prohibition
Protect from moisture!
Read all these instructions before using the stapling device and keep
the safety instructions in a safe place.
The operating personnel must be trained in the handling of the stapling device and they must have fully
read and understood the operating instruction.
To avoid injury or damage, the operator must additionally observe the company's internal safety
guidelines!
In addition, we would like to refer to further national rules and safety provisions which are not contained
in this manual.
Keep persons who are not instructed, especially children, away from your work
area!
If damage to the device is determined by the operator during production, the device may no longer be
used and must be repaired by a professional!
The required personal protective equipment must be provided by the operator.
Only original parts may be used as spare parts!
Loading...